[ECOS] GUI library

[ECOS] GUI library

[famlabus]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="us-ascii", Size: 731 bytes --]

Hi,

I'm going to use an open source GUI library to control either 
the Powertip PG240128WRF-ATA-H with Toshiba T6963C and Matrix Touch 5 x 10
AMT8704.
or the 
EDT EW32F40FLW QVGA (320x240) with Epson S1D13305 und TP-9523-5.6 4-wire
analog Touch. 
My target hardware is the LPC-E2294 board from Olimex(www.olimex.com) with
the LPC2294 running ecos.
Unfortunately minigui, my first decision, (minigui.org) needs a lot of
memory to run (recommended are 2MB Ram and 2MB Rom for ecos systems).

Has anyone a suggestion which GUI lib I should use (C/PEG, FLTK,
easygui,...)?

Thanks,

Michael

-- 
Lust, ein paar Euro nebenbei zu verdienen? Ohne Kosten, ohne Risiko!
Satte Provisionen für GMX Partner: http://www.gmx.net/de/go/partner

Re: [ECOS] GUI library

[Jachym Holecek]

Hello,

> I'm going to use an open source GUI library to control either 
> the Powertip PG240128WRF-ATA-H with Toshiba T6963C and Matrix Touch 5 x 10
> AMT8704.
> or the 
> EDT EW32F40FLW QVGA (320x240) with Epson S1D13305 und TP-9523-5.6 4-wire
> analog Touch. 
> My target hardware is the LPC-E2294 board from Olimex(www.olimex.com) with
> the LPC2294 running ecos.
> Unfortunately minigui, my first decision, (minigui.org) needs a lot of
> memory to run (recommended are 2MB Ram and 2MB Rom for ecos systems).
> 
> Has anyone a suggestion which GUI lib I should use (C/PEG, FLTK,
> easygui,...)?

I'm happy with Allegro on my embedded (mostly) Linux systems. Getting
it to run on eCos shouldn't be too hard -- a week or two I guess. There's
a couple of GUI libraries built on top of Allegro, though I admit I'm using
lowlevel drawing primitives directly to get my UIs painted...

	Regards,
		-- Jachym Holecek