Re: Porting eCos to STR9

[Ilija Koco <ilijak@siva.com.mk>]

Ilija Koco wrote:
> C. Adam Lamb wrote:
>   
>>> I did my 1st port recently and I had same dillema. I choosed the one
>>> with most simillar booting sequence and memory structure. I was looking
>>> for peripheral simillarity too, but unfortunatelly i found no chips with
>>> peripharals simillar to mine.
>>>     
>>>       
>> How long did it take you to get the basic part (enough to get an LED
>> blinking, for example) of your first port going?  A few weeks?  
>>   
>>     
> Well' my biggest effort was to consume and compile vast amount of
> documentation. While having experience with porting (proprietary) OS and
> some other processors I was completely novice at ARM and eCos. So I
> spent about 2 week in reading, waiting for my PEEDI.
>
> Then I had to test my hardware (I hadn't off the shelf evaluation board)
> during which time I also got familiar with ARM and found out that eCos'
> downloadable GCC doesn't support big endian. You may not encounter this
> issue but if your chip is BE you will need to build your GNU tool chain
> <http://ecos.sourceware.org/build-toolchain.html>
>
> Once I got this I started porting and within 3-4 weeks I got 1st message
> at serial line through hal_diag functions (I was familiar with similar
> serial port to one I ported).
>
> Porting process is very well described in "eCos reference" and
> "Component writer's guide" and also explained (with example) here
> http://www.phptr.com/browse/product.asp?product_id={0BEE58C4-0812-4B13-9B8C-A0FC31A4C02F}
>
>   
I placed wrong link, sorry!

It should be this
http://www.phptr.com/bookstore/product.asp?isbn=0130354732&redir=1

And here in PDF
http://www.informit.com/content/downloads/perens/0130354732.pdf

>> Anybody have any idea about how much time I should expect to take to just
>> get the basics running (assuming I'm an average guy) before I start on all
>> of the peripherals?
>>
>> Adam
>>
>>
>>   
>>     
>
>
>