From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (qmail 26797 invoked by alias); 29 Jan 2008 12:22:07 -0000 Received: (qmail 26787 invoked by uid 22791); 29 Jan 2008 12:22:06 -0000 X-Spam-Status: No, hits=-0.2 required=5.0 tests=AWL,BAYES_20,TVD_RCVD_IP X-Spam-Check-By: sourceware.org Received: from 204-133-123-27.dia.static.slbbi.com (HELO mail.chez-thomas.org) (204.133.123.27) by sourceware.org (qpsmtpd/0.31) with ESMTP; Tue, 29 Jan 2008 12:21:48 +0000 Received: by mail.chez-thomas.org (Postfix, from userid 999) id 604951950205; Tue, 29 Jan 2008 05:21:47 -0700 (MST) X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on hermes.chez-thomas.org X-Spam-Level: Received: from hermes.chez-thomas.org (hermes_local [192.168.1.101]) by mail.chez-thomas.org (Postfix) with ESMTP id 563C81950098; Tue, 29 Jan 2008 05:21:45 -0700 (MST) Message-ID: <479F1A58.6030000@mlbassoc.com> Date: Tue, 29 Jan 2008 12:22:00 -0000 From: Gary Thomas User-Agent: Thunderbird 2.0.0.9 (X11/20071115) MIME-Version: 1.0 To: madhulingeswara reddy vennapusa CC: ecos-devel Subject: Re: eCos porting to MPC8555 with WiMax board References: <50b56d240801290044g33ba3dd4re852d79a243a09ff@mail.gmail.com> In-Reply-To: <50b56d240801290044g33ba3dd4re852d79a243a09ff@mail.gmail.com> X-Enigmail-Version: 0.95.6 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-IsSubscribed: yes Mailing-List: contact ecos-devel-help@ecos.sourceware.org; run by ezmlm Precedence: bulk List-Id: List-Subscribe: List-Post: List-Help: , Sender: ecos-devel-owner@ecos.sourceware.org X-SW-Source: 2008-01/txt/msg00004.txt.bz2 madhulingeswara reddy vennapusa wrote: > hai all, > I am tring to port ecos to MPC 8555 processor with WiMax > board. I found major areas that needs to be change and those are > serial,ethernet drivers, inturrupt handling, memory management. now my > quetions are > > Does porting eCos to a new processor depend on both processor and board? > Is there any other areas that need to be change? > I am thinking to use MPC 8260 as base line is it correct or not? > plz some one clear my doubts at the earliest. Have you read the porting guide in the documentation? -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------