Re: How do I add a serial driver?

[Gary Thomas <gary@mlbassoc.com>]

Paul J THACKER wrote:
> Andrew Lunn wrote:
>>> Ok, I found the ecc file. CYGPKG_IO_SERIAL_ARM_CARTESIO wasn't there, 
>>> so  I added it by hand. Now it shows up in configtool, but it's 
>>> grayed out,  and still doesn't compile.
>>
>> You should never need to add things by hand. If it is missing, it must
>> be because it is not part of you current configuration.
>>
>> CYGPKG_IO_SERIAL_ARM_CARTESIO is a hardware package? And you added it
>> to your CARTESIO target in the ecos.db?
>>
>> Do an
>> ecosconfig export config.ecc
>> and send config.ecc.
>>
>>     Andrew
> 
> thackerp@cea05:~/cartesio/ecos/ecos-2.0/packages> ecosconfig export 
> config.ecc
> ecos.ecc: error
>     couldn't read file "ecos.ecc": no such file or directory
> Invalid savefile "ecos.ecc".
> 1 error occurred while reading in the savefile data.

Just send the .ecc file you said you found, or make sure you
are in the directory where it resides when you run 'ecosconfig'


-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------