From: Ilija Kocho <ilijak@siva.com.mk>
To: Alex Schuilenburg <alexs@ecoscentric.com>
Cc: eCos developers <ecos-devel@ecos.sourceware.org>
Subject: Re: eCos GNU tools 4.6.2-20120125 ready for testing
Date: Fri, 09 Mar 2012 09:39:00 -0000 [thread overview]
Message-ID: <4F59CFBE.601@siva.com.mk> (raw)
In-Reply-To: <4F58EC32.9070103@ecoscentric.com>
Hi Alex
Thank you for the update.
Regarding EA target (ARM7TDMI) I'm interested whether the perms include
thumb code. There's an issue reported by Sergei that would be good to
investigate.
http://bugs.ecos.sourceware.org/show_bug.cgi?id=1001468#c25
Ilija
On 08.03.2012 18:28, Alex Schuilenburg wrote:
> Hi
>
> Just an updated on the status of the Embedded Artists LPC2468-32 board
> in anoncvs.
>
> I have finally got a limping version of RedBoot generated from anoncvs
> running on this platform in our test farm, and it does run tests
> generated from anoncvs ecos. Unfortunately both ethernet and flash
> support for this board appears broken, so lwip and bsd testing is out.
> When built with flash and/or ethernet support, RedBoot either hangs on
> startup (if flash support is included) or fails to recognise the
> ethernet device.
>
> So the version of RedBoot I finally installed had broken ethernet and no
> flash support, but appears to work OK (it has run 4 anoncvs tests in the
> farm since I re-released it an hour ago, 3 passed and the other,
> realloc, failed but is also fails in eCosPro so no need to investigate
> that. I ran tm_basic by hand yesterday built from the default
> configuration and that also passed).
>
> The differences between the eCos and eCosPro BSPs for the Embedded
> Artists LPC2468-32 board were too different for the tests and RedBoot
> from different source bases to be compatible. However, before I
> switched back to anoncvs RedBoot, the test results from eCosPro only
> were good. The board had run just over 5500 tests and there were no
> regressions with the tests I could find between our GNU tools and eCos
> GNU tools 4.6.2-20120125 (apart from the additional warnings during the
> builds already reported on this list). No bsd configurations were built
> before I switched.
>
> More results later...
> -- Alex
>
>
>
>
>
>
>
next prev parent reply other threads:[~2012-03-09 9:39 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-13 17:01 Gnutools: consideration for upgrade to GCC 4.6 Ilija Kocho
2012-01-13 18:54 ` Bernard Fouché
2012-01-13 19:39 ` Ilija Kocho
2012-01-13 19:09 ` Frank Pagliughi
2012-01-13 19:45 ` Ilija Kocho
2012-01-14 10:22 ` John Dallaway
2012-01-14 16:02 ` Sergei Gavrikov
2012-01-15 17:36 ` Grant Edwards
2012-01-15 18:42 ` Sergei Gavrikov
2012-01-15 21:39 ` Stanislav Meduna
2012-01-23 1:01 ` Jonathan Larmour
2012-01-15 22:21 ` Ilija Kocho
2012-01-15 22:21 ` Ilija Kocho
2012-01-23 1:07 ` Jonathan Larmour
2012-01-16 15:20 ` Grant Edwards
2012-01-16 20:43 ` Sergei Gavrikov
2012-01-16 21:11 ` Sergei Gavrikov
2012-01-17 9:58 ` Bernard Fouché
2012-01-17 10:38 ` Paul Beskeen
2012-01-17 12:28 ` Sergei Gavrikov
2012-01-23 0:59 ` Jonathan Larmour
2012-01-14 16:25 ` Ilija Kocho
2012-01-23 1:13 ` Jonathan Larmour
2012-01-23 18:40 ` Ilija Kocho
2012-01-23 19:29 ` Jonathan Larmour
2012-01-25 12:30 ` Alex Schuilenburg
2012-01-25 20:59 ` Ilija Kocho
2012-01-26 13:36 ` Alex Schuilenburg
2012-01-26 20:18 ` Ilija Kocho
2012-02-13 22:02 ` eCos GNU tools 4.6.2-20120125 ready for testing [Was Re: Gnutools: consideration for upgrade to GCC 4.6] Ilija Kocho
2012-02-20 16:00 ` Alex Schuilenburg
2012-02-20 20:45 ` Ilija Kocho
2012-03-02 16:36 ` Alex Schuilenburg
2012-03-03 13:32 ` Ilija Kocho
2012-03-04 0:10 ` Alex Schuilenburg
2012-03-04 17:49 ` Sergei Gavrikov
2012-03-04 23:08 ` Alex Schuilenburg
2012-03-04 19:37 ` eCos GNU tools 4.6.2-20120125 ready for testing John Dallaway
2012-03-04 23:47 ` Alex Schuilenburg
2012-03-05 8:00 ` Sergei Gavrikov
2012-03-07 13:51 ` Sergei Gavrikov
2012-03-07 11:58 ` Alex Schuilenburg
2012-03-07 13:01 ` Ilija Kocho
2012-03-07 13:39 ` Sergei Gavrikov
2012-03-07 13:13 ` John Dallaway
2012-03-12 16:43 ` Alex Schuilenburg
2012-03-16 15:05 ` Alex Schuilenburg
2012-03-08 17:28 ` Alex Schuilenburg
2012-03-09 9:39 ` Ilija Kocho [this message]
2012-03-09 17:15 ` Alex Schuilenburg
2012-03-10 17:16 ` John Dallaway
2012-03-12 16:12 ` Alex Schuilenburg
2012-03-13 13:31 ` Alex Schuilenburg
2012-03-13 14:16 ` Ilija Kocho
2012-03-13 17:47 ` Sergei Gavrikov
2012-03-15 8:50 ` John Dallaway
2012-03-17 14:50 ` Sergei Gavrikov
2012-03-17 20:58 ` John Dallaway
2012-03-17 16:44 ` Stanislav Meduna
2012-03-18 19:10 ` eCos GNU tools 4.6.3-20120315 [Was Re: eCos GNU tools 4.6.2-20120125 ready for testing] Ilija Kocho
2012-04-04 12:57 ` Lambrecht Jürgen
2012-04-04 13:18 ` Ilija Kocho
2012-05-31 8:42 ` eCos GNU tools 4.6.3-20120315 and link time optimization Bernard Fouché
2012-03-05 8:30 ` eCos GNU tools 4.6.2-20120125 ready for testing Tomas Frydrych
2012-03-05 8:56 ` Tomas Frydrych
2012-03-05 9:50 ` John Dallaway
2012-03-05 9:55 ` Anders Montonen
2012-03-05 14:20 ` John Dallaway
2012-03-05 10:16 ` Ilija Kocho
2012-03-05 12:56 ` Tomas Frydrych
2012-03-03 12:58 ` eCos GNU tools 4.6.2-20120125 ready for testing [Was Re: Gnutools: consideration for upgrade to GCC 4.6] Sergei Gavrikov
2012-01-17 9:37 ` Gnutools: consideration for upgrade to GCC 4.6 Tomas Frydrych
2012-01-17 16:10 ` Stanislav Meduna
2012-01-17 16:25 ` Tomas Frydrych
2012-01-17 16:45 ` Ilija Kocho
2012-01-20 14:42 ` Frank Pagliughi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F59CFBE.601@siva.com.mk \
--to=ilijak@siva.com.mk \
--cc=alexs@ecoscentric.com \
--cc=ecos-devel@ecos.sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).