Suggest some project idea for our contribution to eCos community

Suggest some project idea for our contribution to eCos community

[Devendra]

We are a group of 3 students studying in the final year of Computer
Engineering. We are looking for some smaller project/assignment for our
Embedded Systems course. Since we have a moderate working knowledge of
eCos and its internals we would like to do some eCos development. We can
spend around 100 hours per person for this task. Could you please
suggest us some project ideas?

-- 
~ Devendr@...

Re: Suggest some project idea for our contribution to eCos community

[@ 2005-01-06 10:49 UTC (permalink / raw)]

Hello!

I am also working on my final project of Electronic and Computers 
Engineering.
And my final project also is developed in eCos.
I'm developing a generic embedded system that is supposed to provide all 
kinds of remote access to it.
Serial port, ethernet and webserver are the main issues.... but Bluetooth is 
my main purpose... although it is very hard to port a bluetooth stack into 
eCos. But I am working on it....

If you want so, we can exchange some ideas.

Thanks.

Gonçalo Antunes.
gmma@gmma.net
Portugal..



----- Original Message ----- 
From: "Devendra" <devendra.vyavahare@gmail.com>
To: <ecos-devel@sources.redhat.com>
Sent: Thursday, January 06, 2005 10:28 AM
Subject: Suggest some project idea for our contribution to eCos community


> We are a group of 3 students studying in the final year of Computer
> Engineering. We are looking for some smaller project/assignment for our
> Embedded Systems course. Since we have a moderate working knowledge of
> eCos and its internals we would like to do some eCos development. We can
> spend around 100 hours per person for this task. Could you please
> suggest us some project ideas?
>
> -- 
> ~ Devendr@...
> 

AW: Suggest some project idea for our contribution to eCos community

[Neundorf, Alexander]

> -----Ursprüngliche Nachricht-----
> Von: ecos-devel-owner@sources.redhat.com
> [mailto:ecos-devel-owner@sources.redhat.com]Im Auftrag von Devendra
> 
> We are a group of 3 students studying in the final year of Computer
> Engineering. We are looking for some smaller 
> project/assignment for our
> Embedded Systems course. Since we have a moderate working knowledge of
> eCos and its internals we would like to do some eCos 
> development. We can
> spend around 100 hours per person for this task. Could you please
> suggest us some project ideas?

Bluetooth, SD-card (some simplified specs are available freely), vfat, ftp-server, smb-server/client, maybe CORBA (ACO/TAO), USB host/OTG support, WLAN, ....
If you need more ideas, let me know :-)

Bye
Alex

Re: Suggest some project idea for our contribution to eCos community

[Andrew Lunn]

On Thu, Jan 06, 2005 at 05:15:32PM +0100, Neundorf, Alexander wrote:
> > -----Urspr?ngliche Nachricht-----
> > Von: ecos-devel-owner@sources.redhat.com
> > [mailto:ecos-devel-owner@sources.redhat.com]Im Auftrag von Devendra
> > 
> > We are a group of 3 students studying in the final year of Computer
> > Engineering. We are looking for some smaller 
> > project/assignment for our
> > Embedded Systems course. Since we have a moderate working knowledge of
> > eCos and its internals we would like to do some eCos 
> > development. We can
> > spend around 100 hours per person for this task. Could you please
> > suggest us some project ideas?
> 

> Bluetooth, SD-card (some simplified specs are available freely),
> vfat, ftp-server, smb-server/client, maybe CORBA (ACO/TAO), USB
> host/OTG support, WLAN, ....  

Come on Alex. These are three final year Computer Engineering students
with 100 hours each. The only thing you listed that would be possible
is the ftp-server. The rest are huge project that requires lots of
knowledge, which a typical student does not have.

Two more sensible suggestions:

There was recently two contributions of a pipe device, which
implements something very similar to Unix FIFO's and a pseudo tty
device. Im in the process of cleaning them up and committing
them. What would be useful is to write an ssh daemon and telnet daemon
which sits on top of the master side of the pty. The problem with this
tasks is there is little to do with actually embedded hardware. So you
supervisor may reject the ideas. 

        Andrew

AW: Suggest some project idea for our contribution to eCos community

[Neundorf, Alexander]

> Von: Andrew Lunn [mailto:andrew@lunn.ch]
>
> Come on Alex. These are three final year Computer Engineering students
> with 100 hours each. The only thing you listed that would be possible
> is the ftp-server. 

Well, they asked for work ;-)

> Two more sensible suggestions:
> 
> There was recently two contributions of a pipe device, which
> implements something very similar to Unix FIFO's and a pseudo tty
> device. Im in the process of cleaning them up and committing
> them. What would be useful is to write an ssh daemon and telnet daemon
> which sits on top of the master side of the pty. The problem with this
> tasks is there is little to do with actually embedded hardware. So you
> supervisor may reject the ideas. 

How about these:

-implement unicode for microwindows
-I heard that there must have been some GUI memory layout tool in ecos 1.x which hasn't made it to 2.x, work on this one
-work on kernel instrumentation, the docs say it will be improved and host-side tools will be implemented somewhen in the future, but it hasn't happened yet (AFAIK)

Bye
Alex

Re: Suggest some project idea for our contribution to eCos community

[Andrew Lunn]

> How about these:
> 
> -implement unicode for microwindows

Not really an embedded systems project, more of a computer graphics
project.

> -I heard that there must have been some GUI memory layout tool in
> ecos 1.x which hasn't made it to 2.x, work on this one

Humm, that could be useful, although i suspect it will be painfull to
adopt. Its been dead for too long and i many of the current .mlt files
are broken.

> -work on kernel instrumentation, the docs say it will be improved
> and host-side tools will be implemented somewhen in the future, but
> it hasn't happened yet (AFAIK)

There is already a very basic tool. I wrote it. But a less cryptic
tool would definiately help. This would also give a good insight as to
what actually goes on inside an RTOS. I like this idea. Take a look at
http://ecos.sourceware.org/docs-latest/user-guide/kernel-instrumentation.html

and 

http://ecos.sourceware.org/cgi-bin/cvsweb.cgi/~checkout~/ecos/packages/kernel/current/host/instr/readme.txt?rev=1.1&content-type=text/plain&cvsroot=ecos

        Andrew

Re: Suggest some project idea for our contribution to eCos community

[Alex Schuilenburg]

Andrew Lunn wrote:
[...]
>>-I heard that there must have been some GUI memory layout tool in
>>ecos 1.x which hasn't made it to 2.x, work on this one
> 
> 
> Humm, that could be useful, although i suspect it will be painfull to
> adopt. Its been dead for too long and i many of the current .mlt files
> are broken.

There was a reason this was not carried over to 2.0. It is also a lot 
more work than the 7.5 weeks offered so unfortunately this had to be 
dropped.

It is still on our eCosCentric todo list, though at a low priority.

-- Alex