some questions about run-time image

some questions about run-time image

[Cheng Ping]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=gb2312; format=flowed, Size: 996 bytes --]

Hello all,

I try to run ecos in a board with MPC8250, SMC1 for console, and 
FCC3/LXT971 for ethernet.
I take the rattler variant for the base, and change some codes for our 
configuration. Now the 
RedBoot seems OK, at least the console and ethernet can work.

But when I want to run the ecos run-time image with the simplest hello 
program, some
questions happened.

1. When CYGSEM_HAL_USE_ROM_MONITOR enabled, load the run-image from tftp 
then run.
There are console outputs. But the network can be accessed. Both DHCP and 
static configuration
are tried.

2. When CYGSEM_HAL_USE_ROM_MONITOR disabled, tftp load and run, the console 
just like
RedBoot> go
$O496E69742064657669636520272F6465762F73657231270A#71
then stalled. The network can't be accessed either.

How to deal with it?

Thanks and best regards,

Rex Cheng

_________________________________________________________________
ÓëÁª»úµÄÅóÓѽøÐн»Á÷£¬ÇëʹÓà MSN Messenger:  http://messenger.msn.com/cn