[ECOS] RE: shutdown command

[ECOS] RE: shutdown command

[Trenton D. Adams]

Would this maybe be part of the 3Glabs power saving thing?  I mean I
know they will be support devices off, but what about the entire system?

  > -----Original Message-----
  > From: Trenton D. Adams [ mailto:tadams@theone.dnsalias.com ]
  > Sent: Tuesday, August 07, 2001 10:41 AM
  > To: eCos Discussion
  > Subject: shutdown command
  > 
  > Is there an eCos generic power off command?  I need to know how to
put
  > the
  > my EDB7xxx board into off mode.  So, I figured if there's a nice
little
  > function from eCos to do such a thing, that would be great.
  > 
  > If not, is this intended to be put in in the future?
  > 
  > Trenton D. Adams
  > Extreme Engineering
  > #17, 6025 - 12 St. SE
  > Calgary, Alberta, Canada
  > T2H 2K1
  > 
  > Phone: 403 640 9494 ext-208
  > Fax: 403 640 9599
  > 
  > http://www.extremeeng.com

RE: [ECOS] RE: shutdown command

[Trenton D. Adams]

From what I understand, there is an off mode for the EDB7XXX.  Although
it's not actually off, it is in extremely low power mode which is almost
off.  This mode is the mode just before pressing the reset/wakeup
buttons.

-----Original Message-----
From: ecos-discuss-owner@sources.redhat.com
[ mailto:ecos-discuss-owner@sources.redhat.com ] On Behalf Of
rob.wj.jansen@philips.com
Sent: August 9, 2001 2:01 AM
To: tadams@theone.dnsalias.com
Cc: ecos-discuss@sources.redhat.com
Subject: Re: [ECOS] RE: shutdown command



Trenton,

> Is there an eCos generic power off command?  I need to know how to put

> my EDB7xxx board into off mode.  So, I figured if there's a nice 
> little function from eCos to do such a thing, that would be great.

If you really mean off mode.... I don't have any automated function for
this, but would call it like operate_power_switch(). For some reason the
function would not need to know if it has to be switched on or off ....

Or do you think of a more advanced feature to put the ARM into sleep
mode ?

Rob Jansen

Software Engineer
Competence Center Platforms
BU Mobile Communications
Meijhorst 60-10, 6537 KT Nijmegen, The Netherlands
Tel: +31-24-353-6329
Fax: +31-24-353-3613
mailto:Rob.WJ.Jansen@philips.com

Re: [ECOS] RE: shutdown command

[rob.wj.jansen]

Trenton,

> Is there an eCos generic power off command?  I need to know how to put
> my EDB7xxx board into off mode.  So, I figured if there's a nice little
> function from eCos to do such a thing, that would be great.

If you really mean off mode.... I don't have any automated function for this, but would call it like
operate_power_switch(). For some reason the function would not need to know if it has to be switched
on or off ....

Or do you think of a more advanced feature to put the ARM into sleep mode ?

Rob Jansen

Software Engineer
Competence Center Platforms
BU Mobile Communications
Meijhorst 60-10, 6537 KT Nijmegen, The Netherlands
Tel: +31-24-353-6329
Fax: +31-24-353-3613
mailto:Rob.WJ.Jansen@philips.com