From: "alfred" <mliu@centralitycomm.com.cn>
To: "Gary Thomas" <gary@mlbassoc.com>
Cc: "ECOS" <ecos-discuss@sources.redhat.com>
Subject: Re: [ECOS] help for building microwindows
Date: Mon, 24 Nov 2003 16:22:00 -0000 [thread overview]
Message-ID: <000701c3b2a7$185daa20$4702980a@lIUMAO> (raw)
In-Reply-To: <1069690160.22988.61.camel@hermes>
Gary,
Thanks a lot .
I will follow your suggestion.
----- Original Message -----
From: "Gary Thomas" <gary@mlbassoc.com>
To: "alfred" <mliu@centralitycomm.com.cn>
Cc: "ECOS" <ecos-discuss@sources.redhat.com>
Sent: Tuesday, November 25, 2003 12:09 AM
Subject: Re: [ECOS] help for building microwindows
> On Mon, 2003-11-24 at 08:53, alfred wrote:
> > Dear Gary ,
> >
> > Maybe I can still not porting Microwindows to my platform.
> > So can you told me how can I find some resources about how to porting macrowindows to ECOS.
> > Thanks.
> >
>
> There's not a lot to it - you need to add an LCD frame buffer driver
> and a mouse driver. Look at how it's been done for the iPAQ and
> AAED2000. All of the platform specifics live in
> .../services/gfx/mw/v2_0/src/drivers/*ecos*
>
> > Alfred
> >
> >
> > ----- Original Message -----
> > From: "alfred" <mliu@centralitycomm.com.cn>
> > To: "Gary Thomas" <gary@mlbassoc.com>
> > Cc: "ECOS" <ecos-discuss@sources.redhat.com>
> > Sent: Monday, November 24, 2003 11:49 PM
> > Subject: Re: [ECOS] help for building microwindows
> >
> >
> > > Dear gary ,
> > >
> > > Thank you very much .But a new error happens as below.
>
> Did you start with a clean configuration and follow the configure steps
> I outlined below?
>
> > > arm-elf-gcc -c -I/ecos-c/cygwin/home/IBM/GWW/GWW_install/include -I/ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0 -I/ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src -I/ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/tests -I. -I/ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/ -mcpu=arm9 -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority -I/ecos-c/cygwin/home/IBM/GWW/GWW_install/include/microwin -D__ECOS=1 -DMSDOS=0 -DELKS=0 -D__rtems__=0 -D_MINIX=0 -DNOTYET=0 -DUNIX=1 -DHAVE_FILEIO -DHAVE_BMP_SUPPORT=1 -DHAVE_PNM_SUPPORT=1 -DHAVE_XPM_SUPPORT=1 -DxHAVE_JPEG_SUPPORT=1 -DHAVESELECT=1 -Wp,-MD,src/nanox/srvnet.tmp -o src/nanox/services_gfx_mw_srvnet.o /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:24:5: warning: "HAVE_SHAREDMEM_SUPPORT" is not defined
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:32:20: sys/un.h: No such file or directory
> > > In file included from /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/serv.h:131,
> > > from /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:34:
> > > /ecos-c/cygwin/home/IBM/GWW/GWW_install/include/microwin/nano-X.h:753:1: warning: "GrSetBorderColor" redefined
> > > In file included from /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:34:
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/serv.h:93:1: warning: this is the location of the previous definition
> > > In file included from /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/serv.h:131,
> > > from /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:34:
> > > /ecos-c/cygwin/home/IBM/GWW/GWW_install/include/microwin/nano-X.h:754:1: warning: "GrClearWindow" redefined
> > > In file included from /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:34:
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/serv.h:27:1: warning: this is the location of the previous definition
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/serv.h:493:5: warning: "VTSWITCH" is not defined
> > > In file included from /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:35:
> > > make[1]: Leaving directory `/ecos-c/cygwin/home/IBM/GWW/GWW_build/services/gfx/mw/v2_0'
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/nxproto.h:84:5: warning: "notyet" is not defined
> > > make: Leaving directory `/ecos-c/cygwin/home/IBM/GWW/GWW_build'
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c: In function `GrImageBufferSendWrapper':
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:1192: warning: pointer of type `void *' used in arithmetic
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:1266:5: warning: "HAVE_SHAREDMEM_SUPPORT" is not defined
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:1456:5: warning: "HAVE_SHAREDMEM_SUPPORT" is not defined
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c: In function `GsOpenSocket':
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:1511: storage size of `sckt' isn't known
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:1539: dereferencing pointer to incomplete type
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:1511: warning: unused variable `sckt'
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c: In function `GsAcceptClient':
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:1567: storage size of `sckt' isn't known
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:1571: warning: passing arg 3 of `accept' from incompatible pointer type
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:1567: warning: unused variable `sckt'
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:1777:5: warning: "HAVE_SHAREDMEM_SUPPORT" is not defined
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c: In function `GsRead':
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:1808: warning: pointer of type `void *' used in arithmetic
> > > /ecos-c/cygwin/usr/ecos20/packages/services/gfx/mw/v2_0/src/nanox/srvnet.c:1862:5: warning: "HAVE_SHAREDMEM_SUPPORT" is not defined
> > > make[1]: *** [src/nanox/srvnet.o.d] Error 1
> > > make: *** [build] Error 2
> > >
> > >
> > >
> > > Original Message -----
> > > From: "Gary Thomas" <gary@mlbassoc.com>
> > > To: "alfred" <mliu@centralitycomm.com.cn>
> > > Cc: "ECOS" <ecos-discuss@sources.redhat.com>
> > > Sent: Monday, November 24, 2003 11:32 PM
> > > Subject: Re: [ECOS] help for building microwindows
> > >
> > >
> > > > On Mon, 2003-11-24 at 08:28, alfred wrote:
> > > > > Dear Gary ,
> > > > >
> > > > > the configuration as belows
> > > > >
> > > > > target alm2_arm9 {
> > > > > alias { " ARM9/alm2 board" palm2_arm9 }
> > > > > packages { CYGPKG_HAL_ARM
> > > > > CYGPKG_HAL_ARM_ARM9
> > > > > CYGPKG_HAL_ARM_ARM9_ALM2
> > > > > CYGPKG_IO_SERIAL_ARM_ALM2
> > > > > CYGPKG_DEVS_ETH_ALM2_NE2000
> > > > > CYGPKG_IO_DSP_ARM_ALM2
> > > > > CYGPKG_DEVS_CAMERA_ARM_OV7645
> > > > > }
> > > > > description "
> > > > > The Excalibur target provides the packages needed to run
> > > > > eCos on an Altera Excalibur board."
> > > > > }
> > > > >
> > > > > And I also added
> > > > > Common error code
> > > > > dynamic memory allocation
> > > > > ISO C and POSIX infrastructure
> > > > > Microwindows
> > > > > POSIX compatibility layer
> > > > > POSIX File IO compatibility layer
> > > > > ISO C library
> > > > >
> > > > > Thanks,
> > > > > alfred
> > > >
> > > > You need to have networking. Try this:
> > > > % ecosconfig new alm2 net
> > > > % ecosconfig add mw
> > > > % ecosconfig tree
> > > > % make
> > > >
> > > > If you can get this to build, then you'll need to add some code to get
> > > > a test environment running, etc. If you update to the latest CVS, this
> > > > last step is much simpler.
> > > >
> > > > >
> > > > > > % ecosconfig new ipaq net
> > > > > > % ecosconfig add mw
> > > > > > % ecosconfig tree
> > > > > > % make
> > > > > > (or the similar operations using the GUI)
> > > > > >
> > > > > > How have you configured eCos for your platform?
> > > > > > Did you do anything besides just adding the MicroWindows (mw) package?
> > > > > >
> > > > > > --
> > > > > > Gary Thomas <gary@mlbassoc.com>
> > > > > > MLB Associates
> > > > > >
> > > > --
> > > > Gary Thomas <gary@mlbassoc.com>
> > > > MLB Associates
> > > >
> > > >
> > > > --
> > > > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> > > > and search the list archive: http://sources.redhat.com/ml/ecos-discuss
> > > >
> > >
> --
> Gary Thomas <gary@mlbassoc.com>
> MLB Associates
>
prev parent reply other threads:[~2003-11-24 16:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-24 4:48 [ECOS] Unexpected exception handler call (0x53) Dirk Broer
2003-11-24 14:16 ` Nick Garnett
2003-11-24 14:57 ` [ECOS] help for building microwindows centraility_liu
2003-11-24 15:01 ` Gary Thomas
2003-11-24 15:05 ` alfred
2003-11-24 15:08 ` Gary Thomas
2003-11-24 15:13 ` alfred
2003-11-24 15:19 ` alfred
2003-11-24 15:23 ` Gary Thomas
2003-11-24 15:21 ` Gary Thomas
2003-11-24 15:28 ` alfred
2003-11-24 15:32 ` Gary Thomas
2003-11-24 15:49 ` alfred
2003-11-24 15:53 ` alfred
2003-11-24 16:09 ` Gary Thomas
2003-11-24 16:22 ` alfred [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000701c3b2a7$185daa20$4702980a@lIUMAO' \
--to=mliu@centralitycomm.com.cn \
--cc=ecos-discuss@sources.redhat.com \
--cc=gary@mlbassoc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).