From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Trenton D. Adams" <tadams@extremeeng.com>
To: "'Trenton D. Adams'" <tadams@extremeeng.com>, "'Gary Thomas'" <gthomas@redhat.com>
Cc: "'eCos discussion'" <ecos-discuss@sources.redhat.com>
Subject: RE: [ECOS] breakpoint () support locking app
Date: Wed, 11 Jul 2001 08:14:00 -0000
Message-id: <000901c10a1c$2bd1db20$090110ac@TRENT>
X-SW-Source: 2001-07/msg00300.html

Oops, sorry dumb question.  I already said no.  I just thought you meant
it wouldn't work with RedBoot running.

  > -----Original Message-----
  > From: Trenton D. Adams [ mailto:tadams@extremeeng.com ] 
  > Sent: Wednesday, July 11, 2001 9:03 AM
  > To: 'Gary Thomas'
  > Cc: 'eCos discussion'
  > Subject: RE: [ECOS] breakpoint () support locking app
  > 
  > 
  >   > 
  >   > As I expected.  Sorry, but this can't work because as soon 
  >   > as the target application tries to run, the GDB debug 
  >   > channel will break.  In fact, if you have a 'minicom' 
  >   > session open to the board, you'll probably see GDB come 
  > up there.
  >   > 
  >   > Network debugging is only supported using RedBoot - it 
  >   > cannot be done with builtin stubs (when stubs are included 
  >   > in the application).
  >   > 
  > 
  > Ok, I thought that might be the case because when I opened 
  > the com port while trying to connect through the network it 
  > gave me a bunch of garbage.  
  > 
  > So, will the GDB stub watch on port 9000 too if I was to 
  > start it on it's own?
  >