* [ECOS] assabet redboot
@ 2001-03-09 1:14 Jun Wu
2001-03-09 1:59 ` Martin van Veen
0 siblings, 1 reply; 3+ messages in thread
From: Jun Wu @ 2001-03-09 1:14 UTC (permalink / raw)
To: ecos-discuss
Hi eCos experts,
I'm new to eCos. I have some silly questions.
I have build the assbet redboot, and generated four files
redboot.bin
redboot.elf
redboot.img
redboot.srec
As far as assabet board is concerned, I want redboot to boot from flash
without
angel(ARM bootloader).
Which file do I need to program to the flash?
Where(address) do I program in the flash?
Which host tool application will display the Redboot prompt(RedBoot>)?
Best regards
Jun
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ECOS] assabet redboot
2001-03-09 1:14 [ECOS] assabet redboot Jun Wu
@ 2001-03-09 1:59 ` Martin van Veen
2001-03-09 2:07 ` Martin van Veen
0 siblings, 1 reply; 3+ messages in thread
From: Martin van Veen @ 2001-03-09 1:59 UTC (permalink / raw)
To: junw, ecos-discuss
Hi Jun,
--- Jun Wu <junw@huawei.com> wrote:
> I have build the assbet redboot, and generated four files
> redboot.bin
> redboot.elf
> redboot.img
> redboot.srec
>
> As far as assabet board is concerned, I want redboot to boot from
> flash without angel(ARM bootloader). Which file do I need to program
> to the flash? Where(address) do I program in the flash?
You need to flash the redboot.bin file via JTAG. I've done that using
the Jflash-linux tool, which is a port of the Intel JTAG software to
Linux. You can find it at:
ftp://ftp.netwinder.org/users/n/nico/SA1110Jflash.tgz
The original Intel software can be found at:
http://developer.intel.com/design/strong/swsup/SA1110Jflash.htm
> Which host tool application will display the Redboot
> prompt(RedBoot>)?
I'm using minicom (since I'm developing on Linux). 38400 8N1 without
flow control works fine. For Windoze you could use HyperTerminal or
any other terminal program. I would go for another terminal program
because I hear a lot people complain about HyperTerminal (Procomm
for example).
Greetings,
Martin.
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ECOS] assabet redboot
2001-03-09 1:59 ` Martin van Veen
@ 2001-03-09 2:07 ` Martin van Veen
0 siblings, 0 replies; 3+ messages in thread
From: Martin van Veen @ 2001-03-09 2:07 UTC (permalink / raw)
To: junw, ecos-discuss
Hi all,
--- Martin van Veen <martin_van_veen@yahoo.com> wrote:
> ftp://ftp.netwinder.org/users/n/nico/SA1110Jflash.tgz
Well Martin, if you provide an URL, you should check if it
is still valid... The one above isn't. Nicolas renamed the
file into Assabet-Jflash-v1.2-1.tgz. So the correct URL is:
ftp://ftp.netwinder.org/users/n/nico/Assabet-Jflash-v1.2-2.tgz
Sorry,
Martin.
__________________________________________________
Do You Yahoo!?
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2001-03-09 2:07 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-03-09 1:14 [ECOS] assabet redboot Jun Wu
2001-03-09 1:59 ` Martin van Veen
2001-03-09 2:07 ` Martin van Veen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).