From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Trenton D. Adams" <tadams@extremeeng.com>
To: "'Gary Thomas'" <gthomas@redhat.com>
Cc: "'eCos mailing list'" <ecos-discuss@sources.redhat.com>
Subject: RE: [ECOS] RE: Determining network ERROR codes
Date: Thu, 19 Jul 2001 15:20:00 -0000
Message-id: <001601c110a0$ff274520$090110ac@TRENT>
References: <XFMail.20010719161728.gthomas@redhat.com>
X-SW-Source: 2001-07/msg00606.html

You must not have gotten my message about solving the problem.  I solved
it before your last reply!  It was sent to the list.  It seems the list
is going slow today.

Anyhow, I called "init_all_network_interfaces();"


  > -----Original Message-----
  > From: gary@chez-thomas.org [ mailto:gary@chez-thomas.org ] On Behalf
Of
  > Gary Thomas
  > Sent: Thursday, July 19, 2001 4:17 PM
  > To: Trenton D. Adams
  > Cc: eCos mailing list
  > Subject: RE: [ECOS] RE: Determining network ERROR codes
  > 
  > 
  > On 19-Jul-2001 Trenton D. Adams wrote:
  > >   >
  > >   > Ok, how do I know what error corresponds to what?  I got an
error
  > of
  > > 331
  > >   > on a connect () call.  Aren't these supposed to be standard
  > errors?
  > >   > They don't seem to return the same errors as they do on
Windows.
  > > Maybe
  > >   > windows redefines them!
  > >   >
  > >   > Anyhow, where do I look for this information?
  > >   >
  > >
  > > I have the following code.  Connect keeps returning 331
EADDRNOTAVAIL.
  > > I have no idea why that might happen.  This program would work
with a
  > > few modifications on linux and windows as far as I recall.
Inet_addr
  > ()
  > > does return an IP address in network byte order so I can't see
that
  > > being a problem.  Any ideas?
  > >
  > >     int s;
  > >     int one = 1;
  > >     struct sockaddr_in addr;
  > >
  > >     diag_printf("Start socket test\n");
  > >
  > >     s = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
  > >     diag_printf("socket() = %d\n", s);
  > >
  > >     addr.sin_addr.s_addr = inet_addr ("172.16.1.9");
  > >     addr.sin_family = AF_INET;
  > >     addr.sin_port = htons (1024);
  > >     addr.sin_len = sizeof (addr);
  > >     if (connect (s, &addr, sizeof (addr)) != 0)
  > >     {
  > >         diag_printf ("Error connecting to socket! - %d\n",
  > >             errno);
  > >         cyg_test_exit();
  > >     }
  > >
  > >     send (s, "Hello From eCos", strlen ("Hello From eCos"), 0);
  > >
  > >     cyg_test_exit();
  > 
  > Have you run the eCos standard networking tests?
  > 
  > I'd try leaving off the IPPROTO_TCP on the socket() call - use 0.