RE: Re[2]: [ECOS] eCos & RedBoot on AT91SAM7S

["Laurie Gellatly" <laurie.gellatly@netic.com>]

Hi Evgeny,
I'm using the sprite with a phyTec2294 board with an ARM7.
I use the Philips Flash Utility LPC200 to load the flash (actually I
have to do that thru 'flash buffer operations' as the front screen
didn't work for me).
Using the OCD commander I've been able to single step thru the flash
code (took some efforts to get thr right config :endian and speed), but
its pretty slow. Trying to use it thru GDB/insight remotely partly
works. It does not like setting break points or single stepping in
flash.

Good luck.                ...Laurie:{)


-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Evgeny
Belyanco
Sent: Friday, 16 June 2006 6:47 AM
To: Andrew Lunn
Cc: ecos-discuss@ecos.sourceware.org
Subject: Re[2]: [ECOS] eCos & RedBoot on AT91SAM7S


Thursday, June 15, 2006, 10:53:20 PM, you wrote:
>> If I will use simple JTAG tool, for example Macraigor usb2Sprite? 
>> http://www.macraigor.com/usb2sprite.htm
>> will I can make FLASH write, break points, or single step in 
>> AT91SAM7S?

AL> I've never used the MacGraigor tools.

Does anybody successfully use Macraigor tools for complete JTAG (LASH
write, break points, or single step) debug ARM MCU with embedded FLASH?


Evgeny Belyanko
**********************************
* E-mail: ea@kbkcc.ru
**********************************


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss


-- 
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss