From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Trenton D. Adams" To: "'eCos Disuss'" Subject: [ECOS] program doesn't work with new redboot Date: Fri, 10 Aug 2001 13:20:00 -0000 Message-id: <003d01c121d9$f0283030$090110ac@TRENT> X-SW-Source: 2001-08/msg00345.html My program won't work with the new redboot I just compiled. It does the following. $ arm-elf-gdb.exe -nw RigSystem.exe GNU gdb 5.0 Copyright 2000 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i686-pc-cygwin --target=arm-elf"... (gdb) set remotebaud 115200 (gdb) target remote com1 Remote debugging using com1 0xe0006630 in ?? () (gdb) load Loading section .rom_vectors, size 0x40 lma 0x20000 Loading section .text, size 0x389c0 lma 0x20040 Loading section .rodata, size 0x1a1b8 lma 0x58a00 Loading section .data, size 0x1194 lma 0x72bb8 Start address 0x20040 , load size 343372 Ignoring packet error, continuing... Transfer rate: 80793 bits/sec, 306 bytes/write. (gdb) cont Continuing. Ignoring packet error, continuing... Interrupted while waiting for the program. Give up (and stop debugging it)? (y or n) y (gdb) Any ideas? Trenton D. Adams Extreme Engineering #17, 6025 - 12 St. SE Calgary, Alberta, Canada T2H 2K1 Phone: 403 640 9494 ext-208 Fax: 403 640 9599 http://www.extremeeng.com