From: "Anthony Massa" <amassa@san.rr.com>
To: "Gary Thomas" <gthomas@redhat.com>
Cc: "eCos" <ecos-discuss@sourceware.cygnus.com>
Subject: RE: [ECOS] RedBoot
Date: Wed, 27 Dec 2000 11:53:00 -0000 [thread overview]
Message-ID: <00c701c0703e$778768a0$0200a8c0@cts.com> (raw)
In-Reply-To: <XFMail.20001227121209.gthomas@redhat.com>
Here is the dump after applying the patch you sent.
RedBoot(tm) debug environment - built 11:31:22, Dec 27 2000
Platform: Motorola MBX (PowerPC 860)
Copyright (C) 2000, Red Hat, Inc.
RAM: 0x00000000-0x00400000
FLASH: 0xfe000000 - 0xfe080000, 8 blocks of 0x00010000 bytes each.
VP: 83A4, EP: 84A4, Code: 8
000083A4: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
000083B4: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
000083C4: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
000083D4: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
000083E4: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
000083F4: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
00008404: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
00008414: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
00008424: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
00008434: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
00008444: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
00008454: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
00008464: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
00008474: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
00008484: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
00008494: FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF |................|
IP: 192.168.0.5, Default server: 192.168.0.3
RedBoot> Ethernet recv:
0x0000AA2C: FFFF FFFF FFFF 0060 975B 43B8 0064 |.......`.[C..d |
0x0000AA3A: E0E0 03FF FF00 6000 0400 0000 00FF FFFF |......`.........|
0x0000AA4A: FFFF FF04 5200 0000 0000 6097 5B43 B804 |....R.....`.[C..|
0x0000AA5A: 5200 0206 404D 4143 4849 4E45 3254 4F57 |R...@MACHINE2TOW|
0x0000AA6A: 4552 0000 0000 0000 0000 0000 0000 0000 |ER..............|
0x0000AA7A: 0000 0000 0000 0000 0000 0000 0000 0000 |................|
0x0000AA8A: 0000 0000 0000 0000 0000 6097 5B43 B8E8 |..........`.[C..|
0x0000AA9A: 8500 0100 EDBD 813C
>
>
> On 27-Dec-2000 Anthony Massa wrote:
> > That's odd since I can see the correct MAC address from the
> EPPCbug code.
> ^^^^^^^^^^^^
> But not from eCos/RedBoot, that's where the problem lies.
>
> >
> > I did build this redboot image. What do I need to do - any
> help would be
> > great...
>
> Try this patch and let me know what the output is. This will print some
> additional information at the point where the driver is trying to find the
> address information.
>
> Index: hal/powerpc/mbx/current/src/hal_aux.c
> ===================================================================
> RCS file: /home/cvs/ecc/ecc/hal/powerpc/mbx/current/src/hal_aux.c,v
> retrieving revision 1.11
> diff -u -5 -p -r1.11 hal_aux.c
> --- hal/powerpc/mbx/current/src/hal_aux.c 2000/06/15
> 14:31:01 1.11
> +++ hal/powerpc/mbx/current/src/hal_aux.c 2000/12/27 19:10:35
> @@ -281,10 +281,12 @@ _mbx_fetch_VPD(int code, unsigned char *
> int i, len;
>
> _mbx_init_i2c(); // Fetch the data if not already
> vp = &_MBX_eeprom_data[0];
> ep = &_MBX_eeprom_data[sizeof(_MBX_eeprom_data)];
> + diag_printf("VP: %x, EP: %x, Code: %x\n", vp, ep, code);
> + diag_dump_buf(vp, 256);
> while (vp < ep) {
> if (*vp == (unsigned char)code) {
> // Found the desired item
> len = (int)vp[1];
> if (len > size) len = size;
>
> >
> >>
> >> The problem seems to be that the driver in RedBoot (eCos)
> can't get at the
> >> ESA for your board. It is supposed to do this by accessing
> some NVRAM on
> >> the board and then digging it out of a data structure kept by
> EPPCbug. If
> >> eCos can't find the address, it falls back to a hard coded one which is
> >> 0x08 0x00 0x3E 0x28 0x79 0xB8
> >>
> >> Did you build this RedBoot? Can you? If so, perhaps we can debug the
> >> NVRAM code and figure out why it works for me but not for you.
> >>
> >> On 23-Dec-2000 Anthony Massa wrote:
> >> > Gary - thanks for the offer, sorry I took this long to respond,
> >> but this is
> >> > the first chance at running something on my hardware
> platform. I have
> >> > attached two different dumps. The first one is with BOOTP
> enabled. The
> >> > second is with a static IP address of 192.168.0.5. I also did
> >> a "ping" from
> >> > my Windows NT workstation which received a reply from my MBX
> >> board. That is
> >> > shown in the second dump as well.
> >> >
> >> > Any help you can give would be greatly appreciated.
> >> >
> >> > When I do a NIOT command under eppcbug I get the following
> information
> >> > Controller LUN: 20
> >> > Device LUN: 00
> >> > Address: FA200A00
> >> > P-Address: 192.168.0.5
> >> > H-Address: 08 00 3E 27 5A DC
> >> >
> >> > ============================
> >> > START OF FIRST DUMP - WITH BOOTP ENABLED
> >> >
> >> > RedBoot(tm) debug environment - built 09:50:42, Dec 17 2000
> >> > Platform: Motorola MBX (PowerPC 860)
> >> > Copyright (C) 2000, Red Hat, Inc.
> >> >
> >> > RAM: 0x00000000-0x00400000
> >> > FLASH: 0xfe000000 - 0xfe080000, 8 blocks of 0x00010000 bytes each.
> >> > Ethernet send:
> >> > 0x00004A44: FFFF FFFF FFFF 0800 3E28 79B8 0800
> >> |........>(y... |
> >> ^^^^^^^^^^^^^^^
> >> This is the ESA, but not the correct one for your board. This
> is why the
> >> BOOTP setup does not work.
> >>
>
next prev parent reply other threads:[~2000-12-27 11:53 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <00c601c07037$36ec1e50$0200a8c0@cts.com>
2000-12-27 11:12 ` Gary Thomas
2000-12-27 11:53 ` Anthony Massa [this message]
2000-12-27 15:32 ` Gary Thomas
2000-12-27 16:49 ` Anthony Massa
2007-11-19 14:33 Re: [ECOS] redboot Syed Ismail
2007-11-20 20:28 ` Gary Thomas
-- strict thread matches above, loose matches on Subject: below --
2007-11-19 11:56 Syed Ismail
2007-11-19 13:00 ` Gary Thomas
2007-11-12 11:31 Re: [ECOS] Redboot Syed Ismail
2007-11-12 12:14 ` Gary Thomas
2007-11-12 8:40 Syed Ismail
2007-11-12 8:49 ` Andrew Lunn
2007-11-01 12:16 Syed Ismail
2005-05-20 9:11 [ECOS] RedBoot Yuriy V.
2003-04-18 16:59 [ECOS] redboot rameshs
2003-04-22 17:33 ` Jonathan Larmour
2001-12-26 23:11 [ECOS] RedBoot Gustav Kälvesten
2001-12-26 23:07 satish s mantri
2001-05-07 23:16 [ECOS] redboot mekala natarajan
2001-04-20 10:02 [ECOS] RedBoot Anthony Massa
2001-04-20 10:17 ` Jonathan Larmour
2001-04-19 17:24 Anthony Massa
2001-04-19 19:49 ` Jonathan Larmour
2001-04-20 7:22 ` Anthony Massa
2001-04-20 7:36 ` Jonathan Larmour
2001-04-20 17:24 ` Anthony Massa
2001-04-22 14:38 ` Anthony Massa
2001-04-23 12:09 ` Jonathan Larmour
2001-04-19 16:19 Anthony Massa
2001-04-19 16:31 ` Jonathan Larmour
2001-04-19 16:36 ` Anthony Massa
2001-04-19 19:49 ` Jonathan Larmour
[not found] <XFMail.20001218160541.gthomas@redhat.com>
[not found] ` <3A3F957D.4E7868F2@redhat.com>
[not found] ` <20001219112529.A26497@sr1.open-widgets.com>
[not found] ` <3A3FBAD2.8CD0F487@rhinosys.com>
2001-01-02 6:33 ` [ECOS] Redboot Jesper Skov
[not found] <002001c0712a$89dad900$0200a8c0@cts.com>
2001-01-01 8:10 ` [ECOS] RedBoot Gary Thomas
2001-01-01 11:38 ` Anthony Massa
2001-01-01 16:16 ` Gary Thomas
2001-01-01 17:45 ` Anthony Massa
[not found] <003f01c06d3b$50b4ad10$0200a8c0@cts.com>
2000-12-27 10:49 ` Gary Thomas
2000-12-15 5:54 [ECOS] Redboot Doug Fraser
2000-12-09 14:46 Anthony Massa
2000-11-07 7:06 [ECOS] redboot Jörg Rapka
2000-11-07 8:10 ` Gary Thomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00c701c0703e$778768a0$0200a8c0@cts.com' \
--to=amassa@san.rr.com \
--cc=ecos-discuss@sourceware.cygnus.com \
--cc=gthomas@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).