[ECOS] Updating the redboot flash image

[ECOS] Updating the redboot flash image

[madhusudhan.gowda]

Hi all,

Thanks Mark for ur valuable link to the redboot src.

I have one doubt over here, I have referred the 

ecos user manual, in  chapter 4 which says in updating the new
redboot_Rom.bin .

Redboot>load -r -b %{FREEMEMLO}  redboot_Rom.bin  using TFTP to load the
binary version of image .

Here in the link 
Redboot-v1_92p1-npe-bins-builtwith-epk-v1_1.zip contains the 

redboot_RAM.bin , redboot_RAM.elf, redboot_RAM.img ,redboot_RAM.srec
redboot_ROM.bin ,redboot_ROM.elf, redboot_ROM.img ,redboot_ROM.srec
also.

Is it ok if I use only the redboot_Rom.bin (new image) for update? If
not can someone 
Tell the alternate way to directly put the image onto the redboot flash
using the tftp?

Thanks and regds..
-gowda

Confidentiality Notice 

The information contained in this electronic message and any attachments to this message are intended
for the exclusive use of the addressee(s) and may contain confidential or privileged information. If
you are not the intended recipient, please notify the sender at Wipro or Mailadmin@wipro.com immediately
and destroy all copies of this message and any attachments.

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss