[ECOS] Fwd: Re: [ECOS] Very strange: fis create/write fail Err = 92

[ECOS] Fwd: Re: [ECOS] Very strange: fis create/write fail Err = 92

[Xue weihua]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=gb2312; format=flowed, Size: 5862 bytes --]

I still waiting for our hw engineer's response. but I 
turn off CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL option
and then it work well. so just need hw engineer to fix this problem.
Thanks for everyone's help.

>From: "Xue weihua" <snowweihua@msn.com>
>To: pred@163.com
>CC: ecos-discuss@sources.redhat.com
>Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92
>Date: Sun, 09 Nov 2003 23:40:29 +0800
>
>Yes, I have try. I just can write a single block of the flash after 
>unlock a single.
>I can't write two more continuous blocks in the same time.
>what is reason ? I don't think it is hw problem. do you ?
>
>
>>From: "Pred" <pred@163.com>
>>To: "Xue weihua" <snowweihua@msn.com>
>>CC: <ecos-discuss@sources.redhat.com>
>>Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92
>>Date: Sat, 8 Nov 2003 14:50:36 +0800
>>
>>When you unlock a single block of the flash, can you successfully 
>>write to
>>it?
>>If you can do this, but failed to unlock two more continuous blocks 
>>and
>>write to them, I think there may be something wrong with the 
>>lock/unlock
>>procedure.
>>
>>----- Original Message -----
>>From: "Gary Thomas" <gary@mlbassoc.com>
>>To: "Xue weihua" <snowweihua@msn.com>
>>Cc: <ecos-discuss@sources.redhat.com>
>>Sent: Saturday, November 08, 2003 1:37 AM
>>Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92
>>
>>
>> > On Fri, 2003-11-07 at 09:03, Xue weihua wrote:
>> > > I use the command like "fis unlock -f 0x50040000 -l 0x100000".
>> > > I think it is good.because it is work on some sectors.
>> > >
>> > > Yes,I have problem when I do "fis init",it say "Warning: 
>>device
>contents
>> > > not erased, some blocks may not be usable".
>> > >
>> >
>> > You only get this warning if you *don't* use the "-f" option 
>>(which
>> > causes all blocks to be erased)
>> >
>> > > maybe,my hw have problem,because it is new one.I have check it 
>>with
>our
>>hw
>> > > engineer and he
>> > > say he will help me check it.
>> >
>> > It would be nice to find out what blocks work and which ones 
>>fail.
>> > That might tell you if there is a hardware problem (and where).
>> >
>> > >
>> > >
>> > > >From: Gary Thomas <gary@mlbassoc.com>
>> > > >To: Xue weihua <snowweihua@msn.com>
>> > > >CC: ecos-discuss@sources.redhat.com
>> > > >Subject: Re: [ECOS] Very strange: fis create/write fail Err = 
>>92
>> > > >Date: 07 Nov 2003 07:39:58 -0700
>> > > >
>> > > >On Thu, 2003-11-06 at 23:20, Xue weihua wrote:
>> > > > > Hi everyone:
>> > > > >   I have meet a very strange problem on my Intel ixp422 
>>board.
>> > > > > Flash is Intel TE28F128J3C. After do "fis init ",it show 
>>like
>> > > > > RedBoot> fis list
>> > > > > Name              FLASH addr  Mem addr    Length      
>>Entry point
>> > > > > RedBoot           0x50000000  0x50000000  0x00040000  
>>0x00000000
>> > > > > RedBoot config    0x50FC0000  0x50FC0000  0x00001000  
>>0x00000000
>> > > > > FIS directory     0x50FE0000  0x50FE0000  0x00020000  
>>0x00000000
>> > > > >
>> > > > > Then I can't use "fis create/write" to write flash.
>> > > > >
>> > > > > RedBoot> load -r -v -b 0x01008000 zImage
>> > > > > Using default protocol (TFTP)
>> > > > > -
>> > > > > Raw file loaded 0x01008000-0x010bbad3, assumed entry at
>0x01008000
>> > > > > RedBoot> fis create kernel -b 0x01008000 -l 0x100000 -f
>0x50040000
>> > > > > ... Erase from 0x50040000-0x50140000: ........
>> > > > > ... Program from 0x01008000-0x01108000 at 0x50040000: Err 
>>= 92
>> > > > >
>> > > > >
>> > > > > Can't program region at 0x50040000: Error trying to 
>>program
>> > > > >
>> > > > > But I can use "fis create/write" on "RedBoot config" or 
>>"FIS
>> > > directory".
>> > > > > so it means hw has no problem. I can write . but only 
>>write some
>> > > sectors.
>> > > > > It seems these sectors have been done something on by 
>>initialize,
>>but I
>> > > > > don't
>> > > > > know what it is . I have try "fis unlock " before "fis
>>create/write",
>> > > it is
>> > > > > no helpful.
>> > > > >
>> > > >
>> > > >Did you actually unlock the pages that will be written during 
>>the
>> > > >"fis create"?  What was the command that you used?
>> > > >
>> > > >What happens if you try this in some other region of the 
>>FLASH?
>> > > >If you do "fis init -f" (to erase all of the FLASH) - does 
>>every
>> > > >block get erased?
>> > > >
>> > > >Finally, there was a small change to the StrataFlash 
>>lock/unlock
>code
>> > > >just last week.  If you've not tried it, maybe that will 
>>help.
>> > > >
>> > > >--
>> > > >Gary Thomas <gary@mlbassoc.com>
>> > > >MLB Associates
>> > > >
>> > >
>> > > 
>>_________________________________________________________________
>> > > 与联机的朋友进行交流，请使用 MSN Messenger:
>http://messenger.msn.com/cn
>> > --
>> > Gary Thomas <gary@mlbassoc.com>
>> > MLB Associates
>> >
>> >
>> > --
>> > Before posting, please read the FAQ: 
>>http://sources.redhat.com/fom/ecos
>> > and search the list archive: 
>>http://sources.redhat.com/ml/ecos-discuss
>> >
>> >
>>
>>
>>--
>>Before posting, please read the FAQ: 
>>http://sources.redhat.com/fom/ecos
>>and search the list archive: 
>>http://sources.redhat.com/ml/ecos-discuss
>>
>
>_________________________________________________________________
>ÓëÁª»úµÄÅóÓѽøÐн»Á÷£¬ÇëʹÓà MSN Messenger: 
>http://messenger.msn.com/cn
>
>
>--
>Before posting, please read the FAQ: 
>http://sources.redhat.com/fom/ecos
>and search the list archive: 
>http://sources.redhat.com/ml/ecos-discuss
>

_________________________________________________________________
ÏíÓÃÊÀ½çÉÏ×î´óµÄµç×ÓÓʼþϵͳ¡ª MSN Hotmail¡£ http://www.hotmail.com 


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

Re: [ECOS] Fwd: Re: [ECOS] Very strange: fis create/write fail Err = 92

[Pred]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="gb2312", Size: 6829 bytes --]

I thought there is something wrong with the cache or lock/unlock procedure.
Due to time limitation, I made a dirty patch to lock.c and made the fis
create work. If you find the really reason, please feed back to the list.
Thanks.

Pred



----- Original Message ----- 
From: "Xue weihua" <snowweihua@msn.com>
To: <pred@163.com>
Cc: <ecos-discuss@sources.redhat.com>
Sent: Monday, November 10, 2003 9:52 AM
Subject: [ECOS] Fwd: Re: [ECOS] Very strange: fis create/write fail Err = 92


> I still waiting for our hw engineer's response. but I
> turn off CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL option
> and then it work well. so just need hw engineer to fix this problem.
> Thanks for everyone's help.
>
> >From: "Xue weihua" <snowweihua@msn.com>
> >To: pred@163.com
> >CC: ecos-discuss@sources.redhat.com
> >Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92
> >Date: Sun, 09 Nov 2003 23:40:29 +0800
> >
> >Yes, I have try. I just can write a single block of the flash after
> >unlock a single.
> >I can't write two more continuous blocks in the same time.
> >what is reason ? I don't think it is hw problem. do you ?
> >
> >
> >>From: "Pred" <pred@163.com>
> >>To: "Xue weihua" <snowweihua@msn.com>
> >>CC: <ecos-discuss@sources.redhat.com>
> >>Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92
> >>Date: Sat, 8 Nov 2003 14:50:36 +0800
> >>
> >>When you unlock a single block of the flash, can you successfully
> >>write to
> >>it?
> >>If you can do this, but failed to unlock two more continuous blocks
> >>and
> >>write to them, I think there may be something wrong with the
> >>lock/unlock
> >>procedure.
> >>
> >>----- Original Message -----
> >>From: "Gary Thomas" <gary@mlbassoc.com>
> >>To: "Xue weihua" <snowweihua@msn.com>
> >>Cc: <ecos-discuss@sources.redhat.com>
> >>Sent: Saturday, November 08, 2003 1:37 AM
> >>Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92
> >>
> >>
> >> > On Fri, 2003-11-07 at 09:03, Xue weihua wrote:
> >> > > I use the command like "fis unlock -f 0x50040000 -l 0x100000".
> >> > > I think it is good.because it is work on some sectors.
> >> > >
> >> > > Yes,I have problem when I do "fis init",it say "Warning:
> >>device
> >contents
> >> > > not erased, some blocks may not be usable".
> >> > >
> >> >
> >> > You only get this warning if you *don't* use the "-f" option
> >>(which
> >> > causes all blocks to be erased)
> >> >
> >> > > maybe,my hw have problem,because it is new one.I have check it
> >>with
> >our
> >>hw
> >> > > engineer and he
> >> > > say he will help me check it.
> >> >
> >> > It would be nice to find out what blocks work and which ones
> >>fail.
> >> > That might tell you if there is a hardware problem (and where).
> >> >
> >> > >
> >> > >
> >> > > >From: Gary Thomas <gary@mlbassoc.com>
> >> > > >To: Xue weihua <snowweihua@msn.com>
> >> > > >CC: ecos-discuss@sources.redhat.com
> >> > > >Subject: Re: [ECOS] Very strange: fis create/write fail Err =
> >>92
> >> > > >Date: 07 Nov 2003 07:39:58 -0700
> >> > > >
> >> > > >On Thu, 2003-11-06 at 23:20, Xue weihua wrote:
> >> > > > > Hi everyone:
> >> > > > >   I have meet a very strange problem on my Intel ixp422
> >>board.
> >> > > > > Flash is Intel TE28F128J3C. After do "fis init ",it show
> >>like
> >> > > > > RedBoot> fis list
> >> > > > > Name              FLASH addr  Mem addr    Length
> >>Entry point
> >> > > > > RedBoot           0x50000000  0x50000000  0x00040000
> >>0x00000000
> >> > > > > RedBoot config    0x50FC0000  0x50FC0000  0x00001000
> >>0x00000000
> >> > > > > FIS directory     0x50FE0000  0x50FE0000  0x00020000
> >>0x00000000
> >> > > > >
> >> > > > > Then I can't use "fis create/write" to write flash.
> >> > > > >
> >> > > > > RedBoot> load -r -v -b 0x01008000 zImage
> >> > > > > Using default protocol (TFTP)
> >> > > > > -
> >> > > > > Raw file loaded 0x01008000-0x010bbad3, assumed entry at
> >0x01008000
> >> > > > > RedBoot> fis create kernel -b 0x01008000 -l 0x100000 -f
> >0x50040000
> >> > > > > ... Erase from 0x50040000-0x50140000: ........
> >> > > > > ... Program from 0x01008000-0x01108000 at 0x50040000: Err
> >>= 92
> >> > > > >
> >> > > > >
> >> > > > > Can't program region at 0x50040000: Error trying to
> >>program
> >> > > > >
> >> > > > > But I can use "fis create/write" on "RedBoot config" or
> >>"FIS
> >> > > directory".
> >> > > > > so it means hw has no problem. I can write . but only
> >>write some
> >> > > sectors.
> >> > > > > It seems these sectors have been done something on by
> >>initialize,
> >>but I
> >> > > > > don't
> >> > > > > know what it is . I have try "fis unlock " before "fis
> >>create/write",
> >> > > it is
> >> > > > > no helpful.
> >> > > > >
> >> > > >
> >> > > >Did you actually unlock the pages that will be written during
> >>the
> >> > > >"fis create"?  What was the command that you used?
> >> > > >
> >> > > >What happens if you try this in some other region of the
> >>FLASH?
> >> > > >If you do "fis init -f" (to erase all of the FLASH) - does
> >>every
> >> > > >block get erased?
> >> > > >
> >> > > >Finally, there was a small change to the StrataFlash
> >>lock/unlock
> >code
> >> > > >just last week.  If you've not tried it, maybe that will
> >>help.
> >> > > >
> >> > > >--
> >> > > >Gary Thomas <gary@mlbassoc.com>
> >> > > >MLB Associates
> >> > > >
> >> > >
> >> > >
> >>_________________________________________________________________
> >> > > 与联机的朋友进行交流，请使用 MSN Messenger:
> >http://messenger.msn.com/cn
> >> > --
> >> > Gary Thomas <gary@mlbassoc.com>
> >> > MLB Associates
> >> >
> >> >
> >> > --
> >> > Before posting, please read the FAQ:
> >>http://sources.redhat.com/fom/ecos
> >> > and search the list archive:
> >>http://sources.redhat.com/ml/ecos-discuss
> >> >
> >> >
> >>
> >>
> >>--
> >>Before posting, please read the FAQ:
> >>http://sources.redhat.com/fom/ecos
> >>and search the list archive:
> >>http://sources.redhat.com/ml/ecos-discuss
> >>
> >
> >_________________________________________________________________
> >ÓëÁª»úµÄÅóÓѽøÐн»Á÷£¬ÇëʹÓà MSN Messenger:
> >http://messenger.msn.com/cn
> >
> >
> >--
> >Before posting, please read the FAQ:
> >http://sources.redhat.com/fom/ecos
> >and search the list archive:
> >http://sources.redhat.com/ml/ecos-discuss
> >
>
> _________________________________________________________________
> ÏíÓÃÊÀ½çÉÏ×î´óµÄµç×ÓÓʼþϵͳ¡ª MSN Hotmail¡£ http://www.hotmail.com
>
>
> -- 
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
>


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

Re: [ECOS] Fwd: Re: [ECOS] Very strange: fis create/write fail Err = 92

[Gary Thomas]

On Sun, 2003-11-09 at 20:50, Pred wrote:
> I thought there is something wrong with the cache or lock/unlock procedure.
> Due to time limitation, I made a dirty patch to lock.c and made the fis
> create work. If you find the really reason, please feed back to the list.
> Thanks.
> 

This code is known to work on all the platforms we've tested.  If you
find a problem, or know of an error, we'd like to know about it - making
a change in your garage helps no one but you...

> Pred
> 
> 
> 
> ----- Original Message ----- 
> From: "Xue weihua" <snowweihua@msn.com>
> To: <pred@163.com>
> Cc: <ecos-discuss@sources.redhat.com>
> Sent: Monday, November 10, 2003 9:52 AM
> Subject: [ECOS] Fwd: Re: [ECOS] Very strange: fis create/write fail Err = 92
> 
> 
> > I still waiting for our hw engineer's response. but I
> > turn off CYGSEM_REDBOOT_FLASH_LOCK_SPECIAL option
> > and then it work well. so just need hw engineer to fix this problem.
> > Thanks for everyone's help.
> >
> > >From: "Xue weihua" <snowweihua@msn.com>
> > >To: pred@163.com
> > >CC: ecos-discuss@sources.redhat.com
> > >Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92
> > >Date: Sun, 09 Nov 2003 23:40:29 +0800
> > >
> > >Yes, I have try. I just can write a single block of the flash after
> > >unlock a single.
> > >I can't write two more continuous blocks in the same time.
> > >what is reason ? I don't think it is hw problem. do you ?
> > >
> > >
> > >>From: "Pred" <pred@163.com>
> > >>To: "Xue weihua" <snowweihua@msn.com>
> > >>CC: <ecos-discuss@sources.redhat.com>
> > >>Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92
> > >>Date: Sat, 8 Nov 2003 14:50:36 +0800
> > >>
> > >>When you unlock a single block of the flash, can you successfully
> > >>write to
> > >>it?
> > >>If you can do this, but failed to unlock two more continuous blocks
> > >>and
> > >>write to them, I think there may be something wrong with the
> > >>lock/unlock
> > >>procedure.
> > >>
> > >>----- Original Message -----
> > >>From: "Gary Thomas" <gary@mlbassoc.com>
> > >>To: "Xue weihua" <snowweihua@msn.com>
> > >>Cc: <ecos-discuss@sources.redhat.com>
> > >>Sent: Saturday, November 08, 2003 1:37 AM
> > >>Subject: Re: [ECOS] Very strange: fis create/write fail Err = 92
> > >>
> > >>
> > >> > On Fri, 2003-11-07 at 09:03, Xue weihua wrote:
> > >> > > I use the command like "fis unlock -f 0x50040000 -l 0x100000".
> > >> > > I think it is good.because it is work on some sectors.
> > >> > >
> > >> > > Yes,I have problem when I do "fis init",it say "Warning:
> > >>device
> > >contents
> > >> > > not erased, some blocks may not be usable".
> > >> > >
> > >> >
> > >> > You only get this warning if you *don't* use the "-f" option
> > >>(which
> > >> > causes all blocks to be erased)
> > >> >
> > >> > > maybe,my hw have problem,because it is new one.I have check it
> > >>with
> > >our
> > >>hw
> > >> > > engineer and he
> > >> > > say he will help me check it.
> > >> >
> > >> > It would be nice to find out what blocks work and which ones
> > >>fail.
> > >> > That might tell you if there is a hardware problem (and where).
> > >> >
> > >> > >
> > >> > >
> > >> > > >From: Gary Thomas <gary@mlbassoc.com>
> > >> > > >To: Xue weihua <snowweihua@msn.com>
> > >> > > >CC: ecos-discuss@sources.redhat.com
> > >> > > >Subject: Re: [ECOS] Very strange: fis create/write fail Err =
> > >>92
> > >> > > >Date: 07 Nov 2003 07:39:58 -0700
> > >> > > >
> > >> > > >On Thu, 2003-11-06 at 23:20, Xue weihua wrote:
> > >> > > > > Hi everyone:
> > >> > > > >   I have meet a very strange problem on my Intel ixp422
> > >>board.
> > >> > > > > Flash is Intel TE28F128J3C. After do "fis init ",it show
> > >>like
> > >> > > > > RedBoot> fis list
> > >> > > > > Name              FLASH addr  Mem addr    Length
> > >>Entry point
> > >> > > > > RedBoot           0x50000000  0x50000000  0x00040000
> > >>0x00000000
> > >> > > > > RedBoot config    0x50FC0000  0x50FC0000  0x00001000
> > >>0x00000000
> > >> > > > > FIS directory     0x50FE0000  0x50FE0000  0x00020000
> > >>0x00000000
> > >> > > > >
> > >> > > > > Then I can't use "fis create/write" to write flash.
> > >> > > > >
> > >> > > > > RedBoot> load -r -v -b 0x01008000 zImage
> > >> > > > > Using default protocol (TFTP)
> > >> > > > > -
> > >> > > > > Raw file loaded 0x01008000-0x010bbad3, assumed entry at
> > >0x01008000
> > >> > > > > RedBoot> fis create kernel -b 0x01008000 -l 0x100000 -f
> > >0x50040000
> > >> > > > > ... Erase from 0x50040000-0x50140000: ........
> > >> > > > > ... Program from 0x01008000-0x01108000 at 0x50040000: Err
> > >>= 92
> > >> > > > >
> > >> > > > >
> > >> > > > > Can't program region at 0x50040000: Error trying to
> > >>program
> > >> > > > >
> > >> > > > > But I can use "fis create/write" on "RedBoot config" or
> > >>"FIS
> > >> > > directory".
> > >> > > > > so it means hw has no problem. I can write . but only
> > >>write some
> > >> > > sectors.
> > >> > > > > It seems these sectors have been done something on by
> > >>initialize,
> > >>but I
> > >> > > > > don't
> > >> > > > > know what it is . I have try "fis unlock " before "fis
> > >>create/write",
> > >> > > it is
> > >> > > > > no helpful.
> > >> > > > >
> > >> > > >
> > >> > > >Did you actually unlock the pages that will be written during
> > >>the
> > >> > > >"fis create"?  What was the command that you used?
> > >> > > >
> > >> > > >What happens if you try this in some other region of the
> > >>FLASH?
> > >> > > >If you do "fis init -f" (to erase all of the FLASH) - does
> > >>every
> > >> > > >block get erased?
> > >> > > >
> > >> > > >Finally, there was a small change to the StrataFlash
> > >>lock/unlock
> > >code
> > >> > > >just last week.  If you've not tried it, maybe that will
> > >>help.
> > >> > > >
> > >> > > >--
> > >> > > >Gary Thomas <gary@mlbassoc.com>
> > >> > > >MLB Associates
> > >> > > >
> > >> > >
> > >> > >
> > >>_________________________________________________________________
> > >> > > 涓虹杩琛浜ゆ锛璇蜂娇 MSN Messenger:
> > >http://messenger.msn.com/cn
> > >> > --
> > >> > Gary Thomas <gary@mlbassoc.com>
> > >> > MLB Associates
> > >> >
> > >> >
> > >> > --
> > >> > Before posting, please read the FAQ:
> > >>http://sources.redhat.com/fom/ecos
> > >> > and search the list archive:
> > >>http://sources.redhat.com/ml/ecos-discuss
> > >> >
> > >> >
> > >>
> > >>
> > >>--
> > >>Before posting, please read the FAQ:
> > >>http://sources.redhat.com/fom/ecos
> > >>and search the list archive:
> > >>http://sources.redhat.com/ml/ecos-discuss
> > >>
> > >
> > >_________________________________________________________________
> > >与联机的朋友进行交流，请使用 MSN Messenger:
> > >http://messenger.msn.com/cn
> > >
> > >
> > >--
> > >Before posting, please read the FAQ:
> > >http://sources.redhat.com/fom/ecos
> > >and search the list archive:
> > >http://sources.redhat.com/ml/ecos-discuss
> > >
> >
> > _________________________________________________________________
> > 享用世界上最大的电子邮件系统― MSN Hotmail。 http://www.hotmail.com
> >
> >
> > -- 
> > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> > and search the list archive: http://sources.redhat.com/ml/ecos-discuss
> >
> >
-- 
Gary Thomas <gary@mlbassoc.com>
MLB Associates


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss