* [ECOS] Problem building from anon CVS
@ 2005-11-02 14:57 Scott Bailie
2005-11-02 15:03 ` Gary Thomas
0 siblings, 1 reply; 5+ messages in thread
From: Scott Bailie @ 2005-11-02 14:57 UTC (permalink / raw)
To: ecos-discuss
Hi,
Im having problems building with the latest code I downloaded from the anon
CVS. Previously I used the very old code & utils that were included in
Massas book. I simply wanted to get acquainted with eCos following his
tutorial. Next I grabbed the latest from the repository and using the eCos
Config tool v2.11 can no longer build. I get the following error:
/ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c: In function
`hal_platform_init':
/ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:129: parse error
before `lo'
/ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:131: `lo'
undeclared (first use in this function)
/ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:131: (Each
undeclared identifier is reported only once
/ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:131: for each
function it appears in.)
/ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:132: `hi'
undeclared (first use in this function)
Ive searched the mailing list with no luck and I apologize if this was
explained and I missed it. Im running on a WINXP platform with a recent
version of cygwin I just downloaded. Any thoughts as to what is going wrong?
_________________
Scott Bailie
MIT LINCOLN LAB
781.981.4140
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ECOS] Problem building from anon CVS
2005-11-02 14:57 [ECOS] Problem building from anon CVS Scott Bailie
@ 2005-11-02 15:03 ` Gary Thomas
2005-11-02 15:17 ` Scott Bailie
0 siblings, 1 reply; 5+ messages in thread
From: Gary Thomas @ 2005-11-02 15:03 UTC (permalink / raw)
To: Scott Bailie; +Cc: eCos Discussion
On Wed, 2005-11-02 at 09:56 -0500, Scott Bailie wrote:
> Hi,
>
> IĆæm having problems building with the latest code I downloaded from the anon
> CVS. Previously I used the very old code & utils that were included in
> MassaĆæs book. I simply wanted to get acquainted with eCos following his
> tutorial. Next I grabbed the latest from the repository and using the eCos
> Config tool v2.11 can no longer build. I get the following error:
>
> /ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c: In function
> `hal_platform_init':
> /ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:129: parse error
> before `lo'
> /ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:131: `lo'
> undeclared (first use in this function)
> /ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:131: (Each
> undeclared identifier is reported only once
> /ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:131: for each
> function it appears in.)
> /ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:132: `hi'
> undeclared (first use in this function)
>
> IĆæve searched the mailing list with no luck and I apologize if this was
> explained and I missed it. IĆæm running on a WINXP platform with a recent
> version of cygwin I just downloaded. Any thoughts as to what is going wrong?
This looks like a problem with setup - are you sure you're not
getting any other errors/warnings before this? In particular,
this error says that the eCos standard type "cyg_uint8" is not
defined, which would imply that there was a problem including
<cyg/infra/cyg_type.h>
How did you configure eCos?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [ECOS] Problem building from anon CVS
2005-11-02 15:03 ` Gary Thomas
@ 2005-11-02 15:17 ` Scott Bailie
2005-11-02 19:49 ` Andrew Lunn
0 siblings, 1 reply; 5+ messages in thread
From: Scott Bailie @ 2005-11-02 15:17 UTC (permalink / raw)
To: 'Gary Thomas'; +Cc: 'eCos Discussion'
I did previously have a problem in \packages\pkgconf\rules.mak regarding
-finline-limit=7000. I removed it as a quick fix per the comment in
rules.mak. After that change the problem I describe below is the only other
warning/error I see.
I'm building for i386 w/i82559 ethernet, using the net package.
Thanks!
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Gary Thomas
Sent: Wednesday, November 02, 2005 10:03 AM
To: Scott Bailie
Cc: eCos Discussion
Subject: Re: [ECOS] Problem building from anon CVS
On Wed, 2005-11-02 at 09:56 -0500, Scott Bailie wrote:
> Hi,
>
> I'm having problems building with the latest code I downloaded from the
anon
> CVS. Previously I used the very old code & utils that were included in
> Massa's book. I simply wanted to get acquainted with eCos following his
> tutorial. Next I grabbed the latest from the repository and using the eCos
> Config tool v2.11 can no longer build. I get the following error:
>
> /ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c: In function
> `hal_platform_init':
> /ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:129: parse error
> before `lo'
> /ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:131: `lo'
> undeclared (first use in this function)
> /ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:131: (Each
> undeclared identifier is reported only once
> /ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:131: for each
> function it appears in.)
> /ecos-c/ecos/packages/hal/i386/pc/current/src/plf_misc.c:132: `hi'
> undeclared (first use in this function)
>
> I've searched the mailing list with no luck and I apologize if this was
> explained and I missed it. I'm running on a WINXP platform with a recent
> version of cygwin I just downloaded. Any thoughts as to what is going
wrong?
This looks like a problem with setup - are you sure you're not
getting any other errors/warnings before this? In particular,
this error says that the eCos standard type "cyg_uint8" is not
defined, which would imply that there was a problem including
<cyg/infra/cyg_type.h>
How did you configure eCos?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ECOS] Problem building from anon CVS
2005-11-02 15:17 ` Scott Bailie
@ 2005-11-02 19:49 ` Andrew Lunn
2005-11-03 13:05 ` Scott Bailie
0 siblings, 1 reply; 5+ messages in thread
From: Andrew Lunn @ 2005-11-02 19:49 UTC (permalink / raw)
To: Scott Bailie; +Cc: ecos-discuss
On Wed, Nov 02, 2005 at 10:16:29AM -0500, Scott Bailie wrote:
> I did previously have a problem in \packages\pkgconf\rules.mak regarding
> -finline-limit=7000. I removed it as a quick fix per the comment in
> rules.mak. After that change the problem I describe below is the only other
> warning/error I see.
What toolchain version do you have? The fact that -finline-limit=7000
does not work suggests it is very old.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [ECOS] Problem building from anon CVS
2005-11-02 19:49 ` Andrew Lunn
@ 2005-11-03 13:05 ` Scott Bailie
0 siblings, 0 replies; 5+ messages in thread
From: Scott Bailie @ 2005-11-03 13:05 UTC (permalink / raw)
To: 'Andrew Lunn'; +Cc: ecos-discuss
Thanks Andrew that was it! Because I'm behind a firewall here I had a sys
Admin download the latest code from CVS, but I did not update my toolchain.
Doing so manually did the trick!
Thanks again!
-Scott
-----Original Message-----
From: ecos-discuss-owner@ecos.sourceware.org
[mailto:ecos-discuss-owner@ecos.sourceware.org] On Behalf Of Andrew Lunn
Sent: Wednesday, November 02, 2005 2:50 PM
To: Scott Bailie
Cc: ecos-discuss@ecos.sourceware.org
Subject: Re: [ECOS] Problem building from anon CVS
On Wed, Nov 02, 2005 at 10:16:29AM -0500, Scott Bailie wrote:
> I did previously have a problem in \packages\pkgconf\rules.mak regarding
> -finline-limit=7000. I removed it as a quick fix per the comment in
> rules.mak. After that change the problem I describe below is the only
other
> warning/error I see.
What toolchain version do you have? The fact that -finline-limit=7000
does not work suggests it is very old.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2005-11-03 13:05 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-11-02 14:57 [ECOS] Problem building from anon CVS Scott Bailie
2005-11-02 15:03 ` Gary Thomas
2005-11-02 15:17 ` Scott Bailie
2005-11-02 19:49 ` Andrew Lunn
2005-11-03 13:05 ` Scott Bailie
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).