From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (qmail 6802 invoked by alias); 27 Aug 2007 06:28:25 -0000 Received: (qmail 6755 invoked by uid 22791); 27 Aug 2007 06:28:24 -0000 X-Spam-Check-By: sourceware.org Received: from stelecom.gomel.by (HELO stelecom.gomel.by) (82.209.213.61) by sourceware.org (qpsmtpd/0.31) with ESMTP; Mon, 27 Aug 2007 06:28:15 +0000 Received: by stelecom.gomel.by (Postfix, from userid 501) id 0EE7DB01057E; Mon, 27 Aug 2007 09:28:12 +0300 (EEST) Received: from [192.168.0.33] (unknown [82.209.212.146]) by stelecom.gomel.by (Postfix) with ESMTP id 96016B010666; Mon, 27 Aug 2007 09:27:50 +0300 (EEST) From: Sergei Gavrikov To: albert prasetyo Cc: ecos-discuss In-Reply-To: References: <02b801c7e602$3d029150$887ba8c0@PAULD> <1187935563.16741.4.camel@sg-ubuntu> Content-Type: text/plain Date: Mon, 27 Aug 2007 06:28:00 -0000 Message-Id: <1188196396.28515.7.camel@sg-ubuntu> Mime-Version: 1.0 X-Mailer: Evolution 2.8.1 Content-Transfer-Encoding: 7bit X-IsSubscribed: yes Mailing-List: contact ecos-discuss-help@ecos.sourceware.org; run by ezmlm Precedence: bulk List-Id: List-Subscribe: List-Archive: List-Post: List-Help: , Sender: ecos-discuss-owner@ecos.sourceware.org Subject: Re: [ECOS] ecos application problem X-SW-Source: 2007-08/txt/msg00137.txt.bz2 albert prasetyo writes: > Hi all; > > > > > Try to import this > > > > cat <<_EOF | ecosconfig import /dev/stdin > > cdl_option CYGSEM_HAL_USE_ROM_MONITOR {inferred_value 0 Generic}; > > cdl_option CYGSEM_HAL_DIAG_MANGLER {user_value None}; > > _EOF > > > > before the build the eCos stuff > > I have applied above, but still can't get the expected result. The > output of redboot > become as follows: > > RedBoot> load -m y > CCEntry point: 0x21000040, address range: 0x21000000-0x210082b0 > xyzModem - CRC mode, 3(SOH)/98(STX)/0(CAN) packets, 4 retries > RedBoot> go > > After go command was executed, the redboot seems to 'hang' . I think redboot ^^^^^^^^^^^^^^^^^^^^^^^^^^ Do you check an output on both channels? Read this recent thread (Gary did a tip about similar issue): http://ecos.sourceware.org/ml/ecos-discuss/2007-07/msg00204.html Has your target any LED? Make it to blink when application is run/done. Sergei > expected some input from user. I tried to input '+' but nothing happened. > > I read from other threads and conclude that it is possible to run > application by disabling debug channel. I intend to do it by disable > 'debug serial port' > (i.e. CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL) but cannot do it > (cannot find CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE). > Is it the right thing to do? > > By the way I run my redboot on RAM mode, maybe it's the cause the > update can't work. When I try to use redboot in ROM mode, even the > application cannot be downloaded at all. (as described by Henry Wong > in this link : > http://ecos.sourceware.org/ml/ecos-discuss/2006-05/msg00047.html ) > Thank you for your attention. > > Regards; > Albert P > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss