[ECOS] Problem with PowerPC simulator

[lunn@ma.tech.ascom.ch (Andrew Lunn)]

Looking back in the archive i found a message that described my
problem. Please could someone tell me what the fix was.

The changes i made to the configuration are to change the HAL to
PowerPC, and enable the Minimal simulator. The processor is spinning
outside of the program....

Program received signal SIGINT, Interrupt.
0x80090 in _stext ()
    at //d/cygnus/ecos-1.1/packages/kernel/v1_1/src/common/clock.cxx:507
507         counter->add_alarm(this);
(gdb) cont
Continuing.

Program received signal SIGINT, Interrupt.
0x8008c in _stext ()
    at //d/cygnus/ecos-1.1/packages/kernel/v1_1/src/common/clock.cxx:507
507         counter->add_alarm(this);
(gdb) cont
Continuing.

Program received signal SIGINT, Interrupt.
0x80088 in _stext ()
    at //d/cygnus/ecos-1.1/packages/kernel/v1_1/src/common/clock.cxx:507
507         counter->add_alarm(this);

	Thanks
		Andrew

----------------------------------------------------------------------
>>>>> "Ilan" == Ilan Ovadia <ilano@abstract.co.il> writes:

Ilan> The problem is while I'm running the bin_sem0 test I don't get
Ilan> the message

Ilan> PASS:<Binary Semaphore 0 OK> EXIT:<done>

Ilan> Actually, when I set breakpoints in the functions located in
Ilan> bin_sem0 file, the debugger doesn't stop.  It seems like ECOS
Ilan> doesn't succeed to complete the initialization phase and run the
Ilan> test.

Are you using the default configuration? 

Could you try building the library and tests with the default
configuration in a new build directory to see if it makes a difference
(this would ensure that settings from a previous configuration/build
are not being used).

Jesper


----------------------------------------------------------------------
Dr Andrew Lunn		Phone: +41 62 889 5297
ASCOM Systec AG		Fax:   +41 62 889 5290
Gewerberpark		Email: Andrew.Lunn@ascom.ch
CH-5506 Magenwil
Switzerland
----------------------------------------------------------------------