Go to the devs\serial\arm\ source folder, check that you have the files "at91_serial.h" and "eb01_serial.c". Edit the cdl file "ser_arm_eb01.cdl" to compile "eb01_serial.c" instead of "eb01_serial_with_ints.c". -----Original Message----- From: Daniel.Andersson@combitechsystems.com [ mailto:Daniel.Andersson@combitechsystems.com ] Sent: Wednesday, April 25, 2001 01:05 To: scho@ncs.com.sg Subject: RE: [ECOS] Use of internal and external ram Hi again, They run Ok for me to but when i enable a serial port in the "harware serial driver" section then i need a file called: eb01_serial_with_ints.c and i don´t have it. It is not includeed in the source from Carl. Do you have your serial ports up and running. > Yes, I have mangaged to build the sources provided by Carl > van Shauik after > some modifications. I have also make the examples application > and flash it What changes have you done? /Daniel > > > -----Original Message----- > From: Daniel.Andersson@combitechsystems.com > [ mailto:Daniel.Andersson@combitechsystems.com ] > Sent: Monday, April 23, 2001 18:40 > To: scho@ncs.com.sg > Subject: RE: [ECOS] Use of internal and external ram > > > Hi, > > I am also working with the EB40 board. Which source code do > you work with? > Is it then one provided by Carl van Shauik. > > I can download ny eCos to the board but currently i am having > some problems > with the serial port initialization. Do you make use of any > serial ports? > > Regards, Daniel > > > -----Original Message----- > > From: Ho Shui Choy Stanley PS03B NCS [ mailto:scho@ncs.com.sg ] > > Sent: den 23 april 2001 08:28 > > To: Ecos-Discuss (E-mail) > > Subject: [ECOS] Use of internal and external ram > > > > > > I am building eCos for AT91EB40 > > In my platform there is internal ram(addr 0x00100000) and > > external ram(addr > > 0x02000000) how do I make use of both available ram? > > > > Is it possible to specify that the stack space resides in the > > internal ram > > while data in external ram? > > > > Thanks > > Stanley > > >