* [ECOS] ecos ethernet configuration for ipaq @ 2001-07-10 1:04 Weilong Li 2001-07-10 8:54 ` Gary Thomas 0 siblings, 1 reply; 5+ messages in thread From: Weilong Li @ 2001-07-10 1:04 UTC (permalink / raw) To: ecos-discuss Hi, I'm kind of desperately need to enable networking functionality for ipaq. The problem I currently have is I don't know how to set various configurations (whether using dhcp or static ip) in ecos.ecc for ipaq. I have tried for several weeks to do trial and error, but got no luck. If someone can show me a working version of ecos.ecc, (whether using static ip or dhcp), this would be a big big help to me, and I would definitely be willing to buy a lunch or dinner, if you are in silicon valley. thank you so much, Weilong __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ ^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [ECOS] ecos ethernet configuration for ipaq 2001-07-10 1:04 [ECOS] ecos ethernet configuration for ipaq Weilong Li @ 2001-07-10 8:54 ` Gary Thomas 2001-07-11 1:51 ` Weilong Li 0 siblings, 1 reply; 5+ messages in thread From: Gary Thomas @ 2001-07-10 8:54 UTC (permalink / raw) To: Weilong Li; +Cc: ecos-discuss On 10-Jul-2001 Weilong Li wrote: > Hi, I'm kind of desperately need to enable networking > functionality for ipaq. The problem I currently > have is I don't know how to set various configurations > (whether using dhcp or static ip) in ecos.ecc for > ipaq. > I have tried for several weeks to do trial and error, > but got no luck. > > If someone can show me a working version of ecos.ecc, > (whether using static ip or dhcp), this would be a big > big help to me, and I would definitely be willing to > buy a lunch or dinner, if you are in silicon valley. > Here's what I just did, using the iPAQ and DHCP-style addressing: % ecosconfig new ipaq net % ecosconfig add pcmcia % ecosconfig tree % make % make -C net/tcpip/current tests TESTS=tests/nc_test_slave It worked just fine. Note: most likely your problem is the PCMCIA package, which must be added explicitly. ^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [ECOS] ecos ethernet configuration for ipaq 2001-07-10 8:54 ` Gary Thomas @ 2001-07-11 1:51 ` Weilong Li 2001-07-11 5:17 ` Gary Thomas 0 siblings, 1 reply; 5+ messages in thread From: Weilong Li @ 2001-07-11 1:51 UTC (permalink / raw) To: Gary Thomas; +Cc: ecos-discuss The problem is that, after I use % ecosconfig new ipaq net % ecosconfig add pcmcia I got the error message C CYGPKG_DEVS_ETH_CF, "requires" constraint not satisfied: CYGPKG_DEVS_ETH_NS_DP83902A I'm using the latest anoncvs source code. I bought the socket communication cf card, I don't know should I add that CYGPKG_DEVS_ETH_NS_DP83902A package or other package for the cf card. Also, do you need to edit ecos.ecc to configure dhcp things and how? Could you please email me the ecos.ecc? Since it is pretty large, you can email me privately. thank you so much, Weilong > > Here's what I just did, using the iPAQ and > DHCP-style addressing: > > % ecosconfig new ipaq net > % ecosconfig add pcmcia > % ecosconfig tree > % make > % make -C net/tcpip/current tests > TESTS=tests/nc_test_slave > > It worked just fine. > > Note: most likely your problem is the PCMCIA > package, which must > be added explicitly. __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ ^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [ECOS] ecos ethernet configuration for ipaq 2001-07-11 1:51 ` Weilong Li @ 2001-07-11 5:17 ` Gary Thomas 2001-07-12 1:08 ` Weilong Li 0 siblings, 1 reply; 5+ messages in thread From: Gary Thomas @ 2001-07-11 5:17 UTC (permalink / raw) To: Weilong Li; +Cc: ecos-discuss On 11-Jul-2001 Weilong Li wrote: > The problem is that, after I > use > % ecosconfig new ipaq net > % ecosconfig add pcmcia > I got the error message > > C CYGPKG_DEVS_ETH_CF, "requires" constraint not > satisfied: CYGPKG_DEVS_ETH_NS_DP83902A > > I'm using the latest anoncvs source code. This should definitely work - I just did it myself, using the anonCVS sources. When you updated your CVS tree, did you use the '-d' option? This option forces all relevant directories to be updated, not just the ones that were present when you did the original checkout. To safely update the CVS tree, use this: % cd ${anonCVS}/ecos % cvs -q -z9 up -d -P > I bought the socket communication cf card, I don't > know should I add that CYGPKG_DEVS_ETH_NS_DP83902A > package or other package for the cf card. > Also, do you need to edit ecos.ecc to configure > dhcp things and how? > > Could you please email me the ecos.ecc? Since > it is pretty large, you can email me privately. Until you get your CVS tree in shape, this won't do any good. Let me know if you still can't get this to work. > > thank you so much, > > Weilong > >> >> Here's what I just did, using the iPAQ and >> DHCP-style addressing: >> >> % ecosconfig new ipaq net >> % ecosconfig add pcmcia >> % ecosconfig tree >> % make >> % make -C net/tcpip/current tests >> TESTS=tests/nc_test_slave >> >> It worked just fine. >> >> Note: most likely your problem is the PCMCIA >> package, which must >> be added explicitly. > > > __________________________________________________ > Do You Yahoo!? > Get personalized email addresses from Yahoo! Mail > http://personal.mail.yahoo.com/ ^ permalink raw reply [flat|nested] 5+ messages in thread
* RE: [ECOS] ecos ethernet configuration for ipaq 2001-07-11 5:17 ` Gary Thomas @ 2001-07-12 1:08 ` Weilong Li 0 siblings, 0 replies; 5+ messages in thread From: Weilong Li @ 2001-07-12 1:08 UTC (permalink / raw) To: Gary Thomas; +Cc: ecos-discuss Hi, Gary, thanks a lot. I can use the network stack successfully, and can run test examples such as tcp_echo, server_test, etc. The reason that is causing the problem is that the tcp stack code is not updated, I'm using the code at leaset one month ago, though the ecos code is updated. thanks again, Weilong --- Gary Thomas <gthomas@redhat.com> wrote: > > On 11-Jul-2001 Weilong Li wrote: > > The problem is that, after I > > use > > % ecosconfig new ipaq net > > % ecosconfig add pcmcia > > I got the error message > > > > C CYGPKG_DEVS_ETH_CF, "requires" constraint not > > satisfied: CYGPKG_DEVS_ETH_NS_DP83902A > > > > I'm using the latest anoncvs source code. > > This should definitely work - I just did it myself, > using the > anonCVS sources. > > When you updated your CVS tree, did you use the '-d' > option? > This option forces all relevant directories to be > updated, > not just the ones that were present when you did the > original > checkout. > > To safely update the CVS tree, use this: > % cd ${anonCVS}/ecos > % cvs -q -z9 up -d -P > > > I bought the socket communication cf card, I don't > > know should I add that CYGPKG_DEVS_ETH_NS_DP83902A > > package or other package for the cf card. > > Also, do you need to edit ecos.ecc to configure > > dhcp things and how? > > > > Could you please email me the ecos.ecc? Since > > it is pretty large, you can email me privately. > > Until you get your CVS tree in shape, this won't do > any good. > > Let me know if you still can't get this to work. > > > > > thank you so much, > > > > Weilong > > > >> > >> Here's what I just did, using the iPAQ and > >> DHCP-style addressing: > >> > >> % ecosconfig new ipaq net > >> % ecosconfig add pcmcia > >> % ecosconfig tree > >> % make > >> % make -C net/tcpip/current tests > >> TESTS=tests/nc_test_slave > >> > >> It worked just fine. > >> > >> Note: most likely your problem is the PCMCIA > >> package, which must > >> be added explicitly. > > > > > > __________________________________________________ > > Do You Yahoo!? > > Get personalized email addresses from Yahoo! Mail > > http://personal.mail.yahoo.com/ __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/ ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2001-07-12 1:08 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2001-07-10 1:04 [ECOS] ecos ethernet configuration for ipaq Weilong Li 2001-07-10 8:54 ` Gary Thomas 2001-07-11 1:51 ` Weilong Li 2001-07-11 5:17 ` Gary Thomas 2001-07-12 1:08 ` Weilong Li
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).