[ECOS] Redboot on MPC8240

[K Srinivas Aithal <ksaithal_ecos@yahoo.com>]

Hi,

We have brought up the RedBoot prompt on the MPC8240
target. Its
a nice one. Thanks for the eCos. The tool "ecosconfig"
is really
a good one.

We are not  able to use the gdb. 

I get the following errors when I to use the "load"
command at the 
gdb prompt:-
"Ignoring packet error, continuing..."
After trying to give a Ctrl^c now at the gdb I will
get
"Reply contains invalid hex digit 107"

I have done the following:-
1.I'm using the powerpc-eabi-gdb  as "powerpc-eabi-gdb
-nw a.out"
2.I get the gdb prompt
3.I have NOT changed the baudrate to 38400 at gdb 
4.I have connected to the target using the serial
port. I get the 
  following message when I connect "0xa4d30 in ??()".
I didnot 
  understand this much. 
5.When I trigger the command "load" at the gdb prompt,
it shows the 
  start and the size of my text segment properly. 

Can someone help me out to get me the gdb working.

Thanks and Regards,
K Srinivas Aithal




 

__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/