RE: [ECOS] Redboot on MPC8240

[K Srinivas Aithal <ksaithal_ecos@yahoo.com>]

Hi Gary,

Yes I'm trying to load the hello world program. I'm
using a different configuration than I used for
RedBoot.

I have compiled the application to the memory which
Redboot tells as "available". Redboot tells memory
from 0x000bc800 is available. My code is linked to
0x000c6000 and above.

Thanks and Regards,
K Srinivas Aithal

--- Gary Thomas <gthomas@redhat.com> wrote:
> 
> On 25-Jul-2001 K Srinivas Aithal wrote:
> > Hi,
> > 
> > We have brought up the RedBoot prompt on the
> MPC8240
> > target. Its
> > a nice one. Thanks for the eCos. The tool
> "ecosconfig"
> > is really
> > a good one.
> > 
> > We are not  able to use the gdb. 
> > 
> > I get the following errors when I to use the
> "load"
> > command at the 
> > gdb prompt:-
> > "Ignoring packet error, continuing..."
> > After trying to give a Ctrl^c now at the gdb I
> will
> > get
> > "Reply contains invalid hex digit 107"
> > 
> > I have done the following:-
> > 1.I'm using the powerpc-eabi-gdb  as
> "powerpc-eabi-gdb
> > -nw a.out"
> > 2.I get the gdb prompt
> > 3.I have NOT changed the baudrate to 38400 at gdb 
> > 4.I have connected to the target using the serial
> > port. I get the 
> >   following message when I connect "0xa4d30 in
> ??()".
> > I didnot 
> >   understand this much. 
> > 5.When I trigger the command "load" at the gdb
> prompt,
> > it shows the 
> >   start and the size of my text segment properly. 
> > 
> > Can someone help me out to get me the gdb working.
> 
> I assume that you're trying to load an eCos
> application, correct?
> Are you using a different configuration than what
> you used to build
> RedBoot?
> 
> The most common error that can cause this type of
> behaviour is
> using GDB to actually load code onto memory that GDB
> &/or RedBoot use.
> 
> If you provide a little more [detailed] information
> about your setup
> we may be able to help.


__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/