public inbox for ecos-discuss@sourceware.org
 help / color / mirror / Atom feed
From: Mark Salter <msalter@redhat.com>
To: MynamVS@nsc-msg01.network.com
Cc: ecos-discuss@sources.redhat.com
Subject: Re: [ECOS] sdram scrubbing and MMU enabling.
Date: Fri, 03 Aug 2001 10:43:00 -0000	[thread overview]
Message-ID: <200108031743.f73HhaZ01227@deneb.localdomain> (raw)
In-Reply-To: <A7E1C26945C8D211ADBF0008C709661A035F2B0E@nsc-msg02.network.com>

>>>>> Mynampati, Venkata S writes:

>   I am going thru 80312's documentation page 3-31, section
>   3.2.4.4 and it's related to Scrubbing. This doesn't say anything
>   about cache's. Is it in someother section?

I didn't read it in the manual. I was told verbally. The section you
point to involves scrubbing a specific location as part of the ECC
exception handler, not the initial scrub upon power up. The only way
you'll get an ECC exception is to turn on the MMU because ECC is
enabled only when the first level PTE has the P bit set.

> also, where can i find
>   info about first 1MB of sdram stuff?

In hal_platform_setup.h where the P bit is not turned on in the
first level page table entry for the first MB or RAM.

--Mark



  reply	other threads:[~2001-08-03 10:43 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-08-03 10:27 Mynampati, Venkata S.
2001-08-03 10:43 ` Mark Salter [this message]
2001-08-04  6:58 ` Mark Salter
  -- strict thread matches above, loose matches on Subject: below --
2001-08-03 10:01 Mynampati, Venkata S.
2001-08-03 10:08 ` Mark Salter
2001-08-03  9:48 Mynampati, Venkata S.
2001-08-03  9:55 ` Mark Salter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200108031743.f73HhaZ01227@deneb.localdomain \
    --to=msalter@redhat.com \
    --cc=MynamVS@nsc-msg01.network.com \
    --cc=ecos-discuss@sources.redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).