* Re:[ECOS] Serial time out
@ 2001-11-22 22:36 shahmilmerchant
2001-11-26 13:13 ` [ECOS] " Jonathan Larmour
2001-11-29 20:00 ` shahmilmerchant
0 siblings, 2 replies; 4+ messages in thread
From: shahmilmerchant @ 2001-11-22 22:36 UTC (permalink / raw)
To: ecos-discuss
I cant connect to the remote target using the serial line.I seem to be timing
out on the packets being sent.
Any ideas?
Shahmil
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] Serial time out
2001-11-22 22:36 Re:[ECOS] Serial time out shahmilmerchant
@ 2001-11-26 13:13 ` Jonathan Larmour
2001-11-30 17:30 ` Jonathan Larmour
2001-11-29 20:00 ` shahmilmerchant
1 sibling, 1 reply; 4+ messages in thread
From: Jonathan Larmour @ 2001-11-26 13:13 UTC (permalink / raw)
To: shahmilmerchant; +Cc: ecos-discuss
shahmilmerchant@aol.com wrote:
>
> I cant connect to the remote target using the serial line.I seem to be timing
> out on the packets being sent.
> Any ideas?
Check your baud rate. Use "set remotebaud" in command line GDB, or Target
Setup in Insight. Also try using just a terminal emulator like minicom
(Linux) or Hyperterminal (Windows) to check that you're seeing output at
all from the target (unless you already know you are).
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re:[ECOS] Serial time out
2001-11-22 22:36 Re:[ECOS] Serial time out shahmilmerchant
2001-11-26 13:13 ` [ECOS] " Jonathan Larmour
@ 2001-11-29 20:00 ` shahmilmerchant
1 sibling, 0 replies; 4+ messages in thread
From: shahmilmerchant @ 2001-11-29 20:00 UTC (permalink / raw)
To: ecos-discuss
I cant connect to the remote target using the serial line.I seem to be timing
out on the packets being sent.
Any ideas?
Shahmil
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [ECOS] Serial time out
2001-11-26 13:13 ` [ECOS] " Jonathan Larmour
@ 2001-11-30 17:30 ` Jonathan Larmour
0 siblings, 0 replies; 4+ messages in thread
From: Jonathan Larmour @ 2001-11-30 17:30 UTC (permalink / raw)
To: shahmilmerchant; +Cc: ecos-discuss
shahmilmerchant@aol.com wrote:
>
> I cant connect to the remote target using the serial line.I seem to be timing
> out on the packets being sent.
> Any ideas?
Check your baud rate. Use "set remotebaud" in command line GDB, or Target
Setup in Insight. Also try using just a terminal emulator like minicom
(Linux) or Hyperterminal (Windows) to check that you're seeing output at
all from the target (unless you already know you are).
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2001-12-01 1:30 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-11-22 22:36 Re:[ECOS] Serial time out shahmilmerchant
2001-11-26 13:13 ` [ECOS] " Jonathan Larmour
2001-11-30 17:30 ` Jonathan Larmour
2001-11-29 20:00 ` shahmilmerchant
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).