* [ECOS] synthetic-target-error
@ 2002-07-22 5:40 arun%anwsi.com
2002-07-29 16:22 ` Bart Veer
0 siblings, 1 reply; 5+ messages in thread
From: arun%anwsi.com @ 2002-07-22 5:40 UTC (permalink / raw)
To: ecos-discuss; +Cc: grante
hello friends
i tried to compile ecos for linux-synthetic targets
for that i followed the steps given for building binutils,gcc& gdb
1) but after building and making these
i checked the output in "/tools/H-i686-pc-linux-gnu/bin"
but i found only i686-pc-linux-gnu-gcc and i didn't find
i686-pc-linux-gnu-ar
i686-pc-linux-gnu-as
i686-pc-linux-gnu-gdb
i686-pc-linux-gnu-g++
instead i find only ar,as ,g++,gdb there is no "i686-pc-linux-" in the
front
what may be the error?
can u plz suggest me
thanks in advance
arun
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ECOS] synthetic-target-error
2002-07-22 5:40 [ECOS] synthetic-target-error arun%anwsi.com
@ 2002-07-29 16:22 ` Bart Veer
0 siblings, 0 replies; 5+ messages in thread
From: Bart Veer @ 2002-07-29 16:22 UTC (permalink / raw)
To: arun; +Cc: ecos-discuss
>>>>> "Arun" == arun%anwsi com@mail3 srivari net <arun%anwsi.com@mail3.srivari.net> writes:
Arun> hello friends i tried to compile ecos for linux-synthetic
Arun> targets
Arun> for that i followed the steps given for building
Arun> binutils,gcc& gdb
Those instructions are out of date for the current version of the
synthetic target, i.e. anoncvs. From the current documentation:
When developing eCos applications for a normal embedded target it is
necessary to use a suitable cross-compiler and related tools such as
the linker. Developing for the synthetic target is easier because
you can just use the standard GNU tools (gcc, g++, ld, ...) which
were provided with your Linux distribution, or which you used to
build your own Linux setup. Any reasonably recent version of the
tools, for example gcc 2.96(Red Hat) as shipped with Red Hat Linux
7, should be sufficient.
Building special tools is only necessary if for some strange reason
you wanted to do cross-development of synthetic target code, e.g.
build it on a Windows machine and then run the resulting application
on a Linux box. The CDL scripts for the synthetic target detect
whether or not you are developing on a Linux box: if you are then by
default everything gets built using the system-supplied tools such as
gcc; otherwise you are cross-compiling and everything gets built using
i686-pc-linux-gnu versions of the tools.
Bart
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ECOS] synthetic-target-error
@ 2002-07-22 5:43 arun%anwsi.com
0 siblings, 0 replies; 5+ messages in thread
From: arun%anwsi.com @ 2002-07-22 5:43 UTC (permalink / raw)
To: ecos-discuss; +Cc: grante
hello friends
i tried to compile ecos for linux-synthetic targets
for that i followed the steps given for building binutils,gcc& gdb
1) but after building and making these
i checked the output in "/tools/H-i686-pc-linux-gnu/bin"
but i found only i686-pc-linux-gnu-gcc and i didn't find
i686-pc-linux-gnu-ar
i686-pc-linux-gnu-as
i686-pc-linux-gnu-gdb
i686-pc-linux-gnu-g++
instead i find only ar,as ,g++,gdb there is no "i686-pc-linux-" in the
front
what may be the error?
can u plz suggest me
thanks in advance
arun
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 5+ messages in thread
* [ECOS] synthetic-target-error
@ 2002-07-22 20:39 arun%anwsi.com
2002-07-22 22:25 ` NavEcos
0 siblings, 1 reply; 5+ messages in thread
From: arun%anwsi.com @ 2002-07-22 20:39 UTC (permalink / raw)
To: ecos-discuss
Original Message:
-----------------
From: arun%anwsi.com@mail3.srivari.net arun%anwsi.com@mail3.srivari.net
Date: Mon, 22 Jul 2002 09:07:44 -0400
To: ecos-discuss@sources.redhat.com, grante@visi.com
Subject: [ECOS] linux-synthetic-target-error
hello friends
when i was compiling ecos for linux-synthetic target i found an error
i configure and build binutils,gdb,gcc
atlast when i checked the output in /tools/H-i686-pc-linux-gnu/bin"
i didn't find
i686-pc-linux-gnu-ar
i686-pc-linux-gnu-as
i686-pc-linux-gnu-g++
i686-pc-linux-gnu-nu
instead i found only ar,as,g++ ,nu not having i686-pc-linux-gnu at front.
but i686-pc-linux-gcc is installed correctly
can i kinow the reason for this???
thanks in advance
arun.c
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [ECOS] synthetic-target-error
2002-07-22 20:39 arun%anwsi.com
@ 2002-07-22 22:25 ` NavEcos
0 siblings, 0 replies; 5+ messages in thread
From: NavEcos @ 2002-07-22 22:25 UTC (permalink / raw)
To: arun%anwsi.com, ecos-discuss
I'm not sure this is related to your particular problems, but I do
know that if you forget to use this switch:
--target=i386-elf
with "configure" that will happen.
(Refer to: http://sources.redhat.com/ecos/tools/linux-i386-elf.html)
I just did a rebuilt the gnu tools today, so I do know it works.
Anyhow: I think for a SYNTHETIC target it doesn't really matter. In
fact, I think that used the gcc, gdb, etc that I had on my Linux box
when I first tried the synthetic target 9 months ago or so. Things
may have changed since then.
-Rich
On Monday 22 July 2002 08:39 pm, arun%anwsi.com@mail3.srivari.net wrote:
> Original Message:
> -----------------
> From: arun%anwsi.com@mail3.srivari.net arun%anwsi.com@mail3.srivari.net
> Date: Mon, 22 Jul 2002 09:07:44 -0400
> To: ecos-discuss@sources.redhat.com, grante@visi.com
> Subject: [ECOS] linux-synthetic-target-error
>
>
> hello friends
>
> when i was compiling ecos for linux-synthetic target i found an error
>
> i configure and build binutils,gdb,gcc
>
> atlast when i checked the output in /tools/H-i686-pc-linux-gnu/bin"
>
> i didn't find
>
> i686-pc-linux-gnu-ar
>
> i686-pc-linux-gnu-as
>
> i686-pc-linux-gnu-g++
>
> i686-pc-linux-gnu-nu
>
> instead i found only ar,as,g++ ,nu not having i686-pc-linux-gnu at front.
>
> but i686-pc-linux-gcc is installed correctly
>
> can i kinow the reason for this???
>
> thanks in advance
> arun.c
>
>
> --------------------------------------------------------------------
> mail2web - Check your email from the web at
> http://mail2web.com/ .
--
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2002-07-29 23:22 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2002-07-22 5:40 [ECOS] synthetic-target-error arun%anwsi.com
2002-07-29 16:22 ` Bart Veer
2002-07-22 5:43 arun%anwsi.com
2002-07-22 20:39 arun%anwsi.com
2002-07-22 22:25 ` NavEcos
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).