[ECOS] Query

[ECOS] Query

[ecos dev]

Hi 
i want to ask whether i can boot ecos as a stand alone operating system on any target or on which target i can boot this operating system.

thanks & regds
dev

_____________________________________________________________
Want a new web-based email account ? ---> http://www.firstlinux.net

_____________________________________________________________
Select your own custom email address for FREE! Get you@yourchoice.com w/No Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag

-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

Re: [ECOS] Query

[Nick Garnett]

ecos dev <ecos_dev@firstlinux.net> writes:

> Hi 
> i want to ask whether i can boot ecos as a stand alone operating
> system on any target or on which target i can boot this operating
> system.
> 

eCos will run stand alone on all the targets supported. You just build
for ROM startup and program it into the ROM/FLASH. This, after all, is
how it is expected to be used in the final products. RedBoot and RAM
builds are really only there for the development cycle.

-- 
Nick Garnett - eCos Kernel Architect
http://www.eCosCentric.com/

-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

[ECOS] query

[Shaifullah MS]

hi,

these means that eCos be used to program PDA & pocket pc.

thanks.




-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

[ECOS] Query

[Robin Dua]

[-- Attachment #1: Type: text/plain, Size: 847 bytes --]


hi,

I am Robin Dua. I am doing the testing of USB device controller on ARM 
Integrator/AP board using eCos.

The question is that the eCos Ver.1.3.1 manual (getting started with 
eCos) provides eCos ROM image downloads to Flash for ARM PID board and 
not for Integrator board.Since on page 45 of the manual there is a 
referring to 

1. Set jumper 7-8 on LK6 [using the Angel code in the 16 bit EPROM]
2. Set jumper 5-6 on LK6 [select 8bit ROM mode]
3. Set jumper LK18 [ROM remap - this is also required for eCos]
4. Set S1 to 0-0-1-1 [20MHz operation]
5. Open jumper LK4 [enable little-endian operation]

now i read the ARM Integrator /AP manual USER Guide and there is no 
mention of what is LK6.

Please solve my problem as to how should i set these jumpers except for 
S1.Please also mention what is Angel code.

warm regards,

Robin Dua
 


[-- Attachment #2: Wipro_Disclaimer.txt --]
[-- Type: text/plain, Size: 523 bytes --]

**************************Disclaimer**************************************************    
 
 Information contained in this E-MAIL being proprietary to Wipro Limited is 'privileged' 
and 'confidential' and intended for use only by the individual or entity to which it is 
addressed. You are notified that any use, copying or dissemination of the information 
contained in the E-MAIL in any manner whatsoever is strictly prohibited.

****************************************************************************************


[-- Attachment #3: Type: text/plain, Size: 146 bytes --]

-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

RE: [ECOS] Query

[Hiroyasu Shimizu]

Hi,
	I am Robin Dua. I am doing the testing of USB device controller on ARM 
	Integrator/AP board using eCos.

Are you using ARM Integrator/AP instead of obsolete ARM PID board?
eCos 2.0 dose include HAL package for ARM Integrator/AP board.  
Why don't you download latest eCos 2.0 snapshot from anonycvs server.
You can also obtain  latest docs from http://www.vsr.si/ecos/

	The question is that the eCos Ver.1.3.1 manual (getting started with 
	eCos) provides eCos ROM image downloads to Flash for ARM PID board and 
	not for Integrator board.Since on page 45 of the manual there is a 
	referring to 

I beleives that official eCos 1.3.1 release is obsolete.
You should better to use latest eCos and eCos configurator.

Regards,

H.Shimizu


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss

RE: [ECOS] Query

[Robert Cragie]

Yes, you need latest eCos 2.0 to support the ARM Integrator platform.

'Angel' is the ARM debug monitor which was in the PID platform. Integrator
platform has a similar debug monitor which allows downloading and
programming into flash of S-record files (use 'arm-elf-objcopy -S -O srec
<infile> <outfile>' to turn the ELF file produced by the linker into
S-records). So you can either download and flash your complete application
if you want it to run 'turnkey' (i.e. when you power on), or you can
download and flash Redboot, which will allow you to load your application
into RAM and debug it using GDB. I would recommend the Redboot route first.

Robert Cragie, Design Engineer
_______________________________________________________
Jennic Ltd, Furnival Street, Sheffield, S1 4QT,  UK
www.jennic.com  Tel: +44 (0) 114 281 2655

> -----Original Message-----
> From: ecos-discuss-owner@sources.redhat.com
> [mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Hiroyasu
> Shimizu
> Sent: 11 July 2002 07:51
> To: ecos-discuss@sources.redhat.com
> Subject: RE: [ECOS] Query
>
>
> Hi,
> 	I am Robin Dua. I am doing the testing of USB device
> controller on ARM
> 	Integrator/AP board using eCos.
>
> Are you using ARM Integrator/AP instead of obsolete ARM PID board?
> eCos 2.0 dose include HAL package for ARM Integrator/AP board.
> Why don't you download latest eCos 2.0 snapshot from anonycvs server.
> You can also obtain  latest docs from http://www.vsr.si/ecos/
>
> 	The question is that the eCos Ver.1.3.1 manual (getting
> started with
> 	eCos) provides eCos ROM image downloads to Flash for ARM
> PID board and
> 	not for Integrator board.Since on page 45 of the manual there is a
> 	referring to
>
> I beleives that official eCos 1.3.1 release is obsolete.
> You should better to use latest eCos and eCos configurator.
>
> Regards,
>
> H.Shimizu
>
>
> --
> Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
> and search the list archive: http://sources.redhat.com/ml/ecos-discuss
>
>


-- 
Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos
and search the list archive: http://sources.redhat.com/ml/ecos-discuss