* RE: [ECOS] second alarm not triggering [not found] <NMEDLDELHPEFHOMFIJBHMEPECOAA.rcc@jennic.com> @ 2003-10-01 8:31 ` Mahesh 2003-10-07 5:06 ` Mahesh 0 siblings, 1 reply; 8+ messages in thread From: Mahesh @ 2003-10-01 8:31 UTC (permalink / raw) To: Robert Cragie; +Cc: ecos Hi, Sorry for not giving the details. I am using eCos for Arm pid target.I am using sid for printf's .I am working on PC only not on board.In my code i have 5 threads being created in cyg_user_start function.Alarm's are being used by the threads for some tasks.I am using real time clock for alarms.tick function is called after the scheduler is started,but once the first alarm is triggered,tick function is not called at all.So my second alarm(different from first one) is not triggering and the program is getting stuck. Plz reply for this mail. Thanks and Regards Mahesh On Wed, 2003-10-01 at 13:17, Robert Cragie wrote: > Nothing like enough information. You can't expect any help from what you've > written. Give detailed examples of failing source code, target system, > configuration etc. etc. > > Robert Cragie, Design Engineer > > Direct: +44 (0) 114 281 4512 > _______________________________________________________________ > Jennic Ltd, Furnival Street, Sheffield, S1 4QT, UK > http://www.jennic.com Tel: +44 (0) 114 281 2655 Confidential > _______________________________________________________________ > > > -----Original Message----- > > From: ecos-discuss-owner@sources.redhat.com > > [mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Mahesh > > Sent: 01 October 2003 06:12 > > To: ecos > > Subject: [ECOS] second alarm not triggering > > > > > > Hi, > > My first alarm is triggered but the second alarm is not triggering at > > all.After the first alarm is triggered the tick function is not called > > at all.What may be problem? > > Thanks and Regards > > Mahesh > > > > > > _______________________________________________ > > This email with any attachments is for the exclusive use of the intended > > recipient/s & may contain confidential & legally privileged information. > > If you are not the intended recipient pls notify the sender immediately > > & delete the email from your system. Any unauthorised use, disclosure, > > printing, dissemination, forwarding or copying of this mail is strictly > > prohibited and unlawful. > > Visit us at : http://www.cranessoftware.com > > > > > > > > -- > > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos > > and search the list archive: http://sources.redhat.com/ml/ecos-discuss > > > > > > -- Mahesh M Patil Software Engineer Cranes Software International Limited VasanthNagar Bangalore Mobile:9845579634 Office:2381741/2/3 Extn:234 _______________________________________________ This email with any attachments is for the exclusive use of the intended recipient/s & may contain confidential & legally privileged information. If you are not the intended recipient pls notify the sender immediately & delete the email from your system. Any unauthorised use, disclosure, printing, dissemination, forwarding or copying of this mail is strictly prohibited and unlawful. Visit us at : http://www.cranessoftware.com -- Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos and search the list archive: http://sources.redhat.com/ml/ecos-discuss ^ permalink raw reply [flat|nested] 8+ messages in thread
* [ECOS] second alarm not triggering 2003-10-01 8:31 ` [ECOS] second alarm not triggering Mahesh @ 2003-10-07 5:06 ` Mahesh 2003-10-07 5:12 ` Satish Kumar 0 siblings, 1 reply; 8+ messages in thread From: Mahesh @ 2003-10-07 5:06 UTC (permalink / raw) To: ecos Hi, Sorry for not giving the details. I am using eCos for Arm pid target.I am using sid for printf's .I am working on PC only not on board.In my code i have 5 threads being created in cyg_user_start function.Alarm's are being used by the threads for some tasks.I am using real time clock for alarms.tick function is called after the scheduler is started,but once the first alarm is triggered,tick function is not called at all.So my second alarm(different from first one) is not triggering and the program is getting stuck. Plz reply for this mail. Thanks and Regards Mahesh On Wed, 2003-10-01 at 13:17, Robert Cragie wrote: > Nothing like enough information. You can't expect any help from what you've > written. Give detailed examples of failing source code, target system, > configuration etc. etc. > > Robert Cragie, Design Engineer > > Direct: +44 (0) 114 281 4512 > _______________________________________________________________ > Jennic Ltd, Furnival Street, Sheffield, S1 4QT, UK > http://www.jennic.com Tel: +44 (0) 114 281 2655 Confidential > _______________________________________________________________ > > > -----Original Message----- > > From: ecos-discuss-owner@sources.redhat.com > > [mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Mahesh > > Sent: 01 October 2003 06:12 > > To: ecos > > Subject: [ECOS] second alarm not triggering > > > > > > Hi, > > My first alarm is triggered but the second alarm is not triggering at > > all.After the first alarm is triggered the tick function is not called > > at all.What may be problem? > > Thanks and Regards > > Mahesh > > -- Mahesh M Patil Software Engineer Cranes Software International Limited VasanthNagar Bangalore Mobile:9845579634 Office:2381740/1/2 Extn:234 www.cranessoftware.com _______________________________________________ This email with any attachments is for the exclusive use of the intended recipient/s & may contain confidential & legally privileged information. If you are not the intended recipient pls notify the sender immediately & delete the email from your system. Any unauthorised use, disclosure, printing, dissemination, forwarding or copying of this mail is strictly prohibited and unlawful. Visit us at : http://www.cranessoftware.com -- Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos and search the list archive: http://sources.redhat.com/ml/ecos-discuss ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [ECOS] second alarm not triggering 2003-10-07 5:06 ` Mahesh @ 2003-10-07 5:12 ` Satish Kumar 2003-10-07 5:47 ` Mahesh 0 siblings, 1 reply; 8+ messages in thread From: Satish Kumar @ 2003-10-07 5:12 UTC (permalink / raw) To: Mahesh; +Cc: ecos-discuss well, on testing tm_basic program, did u pass the complete test. if yes , then ur alarm funcs are fine..it must be somethin to do with ur code, which u r trying to test. why don`t u paste up ur test code, in the group. saty On 07 Oct 2003 10:09:50 +0530 Mahesh <mahesh@cranessoftware.com> wrote: > Hi, > Sorry for not giving the details. > I am using eCos for Arm pid target.I am using sid for printf's > .I am working on PC only not on board.In my code i have 5 threads being > created in cyg_user_start function.Alarm's are being used by the threads > for some tasks.I am using real time clock for alarms.tick function is > called after the scheduler is started,but once the first alarm is > triggered,tick function is not called at all.So my second > alarm(different from first one) is not triggering and the program is > getting stuck. > Plz reply for this mail. > Thanks and Regards > Mahesh > > On Wed, 2003-10-01 at 13:17, Robert Cragie wrote: > > Nothing like enough information. You can't expect any help from what you've > > written. Give detailed examples of failing source code, target system, > > configuration etc. etc. > > > > Robert Cragie, Design Engineer > > > > Direct: +44 (0) 114 281 4512 > > _______________________________________________________________ > > Jennic Ltd, Furnival Street, Sheffield, S1 4QT, UK > > http://www.jennic.com Tel: +44 (0) 114 281 2655 Confidential > > _______________________________________________________________ > > > > > -----Original Message----- > > > From: ecos-discuss-owner@sources.redhat.com > > > [mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Mahesh > > > Sent: 01 October 2003 06:12 > > > To: ecos > > > Subject: [ECOS] second alarm not triggering > > > > > > > > > Hi, > > > My first alarm is triggered but the second alarm is not triggering at > > > all.After the first alarm is triggered the tick function is not called > > > at all.What may be problem? > > > Thanks and Regards > > > Mahesh > > > > -- > Mahesh M Patil > Software Engineer > Cranes Software International Limited > VasanthNagar > Bangalore > Mobile:9845579634 > Office:2381740/1/2 Extn:234 > www.cranessoftware.com > > > _______________________________________________ > This email with any attachments is for the exclusive use of the intended > recipient/s & may contain confidential & legally privileged information. > If you are not the intended recipient pls notify the sender immediately > & delete the email from your system. Any unauthorised use, disclosure, > printing, dissemination, forwarding or copying of this mail is strictly > prohibited and unlawful. > Visit us at : http://www.cranessoftware.com > > > > -- > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos > and search the list archive: http://sources.redhat.com/ml/ecos-discuss -- Satish Kumar <satish@bvt.sc.sanyo.co.jp> -- Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos and search the list archive: http://sources.redhat.com/ml/ecos-discuss ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [ECOS] second alarm not triggering 2003-10-07 5:12 ` Satish Kumar @ 2003-10-07 5:47 ` Mahesh 2003-10-07 5:54 ` Satish Kumar [not found] ` <1065602343.1050.11.camel@MAHESH> 0 siblings, 2 replies; 8+ messages in thread From: Mahesh @ 2003-10-07 5:47 UTC (permalink / raw) To: Satish Kumar; +Cc: ecos Hi, tm_basic program is getting stuck in the middle.It is not running fully.Does it mean that alarms will not work if this test doesn't pass. Plz reply. Thanks and Regards Mahesh On Tue, 2003-10-07 at 10:42, Satish Kumar wrote: > well, on testing tm_basic program, did u pass the complete test. if yes , > then ur alarm funcs are fine..it must be somethin to do with ur code, > which u r trying to test. why don`t u paste up ur test code, in the > group. > > saty > > > On 07 Oct 2003 10:09:50 +0530 > Mahesh <mahesh@cranessoftware.com> wrote: > > > Hi, > > Sorry for not giving the details. > > I am using eCos for Arm pid target.I am using sid for printf's > > .I am working on PC only not on board.In my code i have 5 threads being > > created in cyg_user_start function.Alarm's are being used by the threads > > for some tasks.I am using real time clock for alarms.tick function is > > called after the scheduler is started,but once the first alarm is > > triggered,tick function is not called at all.So my second > > alarm(different from first one) is not triggering and the program is > > getting stuck. > > Plz reply for this mail. > > Thanks and Regards > > Mahesh > > > > On Wed, 2003-10-01 at 13:17, Robert Cragie wrote: > > > Nothing like enough information. You can't expect any help from what you've > > > written. Give detailed examples of failing source code, target system, > > > configuration etc. etc. > > > > > > Robert Cragie, Design Engineer > > > > > > Direct: +44 (0) 114 281 4512 > > > _______________________________________________________________ > > > Jennic Ltd, Furnival Street, Sheffield, S1 4QT, UK > > > http://www.jennic.com Tel: +44 (0) 114 281 2655 Confidential > > > _______________________________________________________________ > > > > > > > -----Original Message----- > > > > From: ecos-discuss-owner@sources.redhat.com > > > > [mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Mahesh > > > > Sent: 01 October 2003 06:12 > > > > To: ecos > > > > Subject: [ECOS] second alarm not triggering > > > > > > > > > > > > Hi, > > > > My first alarm is triggered but the second alarm is not triggering at > > > > all.After the first alarm is triggered the tick function is not called > > > > at all.What may be problem? > > > > Thanks and Regards > > > > Mahesh > > > > > > -- > > Mahesh M Patil > > Software Engineer > > Cranes Software International Limited > > VasanthNagar > > Bangalore > > Mobile:9845579634 > > Office:2381740/1/2 Extn:234 > > www.cranessoftware.com > > > > > > _______________________________________________ > > This email with any attachments is for the exclusive use of the intended > > recipient/s & may contain confidential & legally privileged information. > > If you are not the intended recipient pls notify the sender immediately > > & delete the email from your system. Any unauthorised use, disclosure, > > printing, dissemination, forwarding or copying of this mail is strictly > > prohibited and unlawful. > > Visit us at : http://www.cranessoftware.com > > > > > > > > -- > > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos > > and search the list archive: http://sources.redhat.com/ml/ecos-discuss > > -- > Satish Kumar <satish@bvt.sc.sanyo.co.jp> > > > -- > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos > and search the list archive: http://sources.redhat.com/ml/ecos-discuss > > -- Mahesh M Patil Software Engineer Cranes Software International Limited VasanthNagar Bangalore Mobile:9845579634 Office:2381740/1/2 Extn:234 www.cranessoftware.com _______________________________________________ This email with any attachments is for the exclusive use of the intended recipient/s & may contain confidential & legally privileged information. If you are not the intended recipient pls notify the sender immediately & delete the email from your system. Any unauthorised use, disclosure, printing, dissemination, forwarding or copying of this mail is strictly prohibited and unlawful. Visit us at : http://www.cranessoftware.com -- Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos and search the list archive: http://sources.redhat.com/ml/ecos-discuss ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [ECOS] second alarm not triggering 2003-10-07 5:47 ` Mahesh @ 2003-10-07 5:54 ` Satish Kumar [not found] ` <1065602343.1050.11.camel@MAHESH> 1 sibling, 0 replies; 8+ messages in thread From: Satish Kumar @ 2003-10-07 5:54 UTC (permalink / raw) To: Mahesh; +Cc: ecos well, tm_basic program tests all the kernel primitives and therefore it should pass the test. recently there were some patches posted regarding the eCos alarm handling func..check the archive..they may give u some hints. satish On 07 Oct 2003 10:42:02 +0530 Mahesh <mahesh@cranessoftware.com> wrote: > Hi, > tm_basic program is getting stuck in the middle.It is not running > fully.Does it mean that alarms will not work if this test doesn't pass. > Plz reply. > Thanks and Regards > Mahesh > > > On Tue, 2003-10-07 at 10:42, Satish Kumar wrote: > > well, on testing tm_basic program, did u pass the complete test. if yes , > > then ur alarm funcs are fine..it must be somethin to do with ur code, > > which u r trying to test. why don`t u paste up ur test code, in the > > group. > > > > saty > > > > > > On 07 Oct 2003 10:09:50 +0530 > > Mahesh <mahesh@cranessoftware.com> wrote: > > > > > Hi, > > > Sorry for not giving the details. > > > I am using eCos for Arm pid target.I am using sid for printf's > > > .I am working on PC only not on board.In my code i have 5 threads being > > > created in cyg_user_start function.Alarm's are being used by the threads > > > for some tasks.I am using real time clock for alarms.tick function is > > > called after the scheduler is started,but once the first alarm is > > > triggered,tick function is not called at all.So my second > > > alarm(different from first one) is not triggering and the program is > > > getting stuck. > > > Plz reply for this mail. > > > Thanks and Regards > > > Mahesh > > > > > > On Wed, 2003-10-01 at 13:17, Robert Cragie wrote: > > > > Nothing like enough information. You can't expect any help from what you've > > > > written. Give detailed examples of failing source code, target system, > > > > configuration etc. etc. > > > > > > > > Robert Cragie, Design Engineer > > > > > > > > Direct: +44 (0) 114 281 4512 > > > > _______________________________________________________________ > > > > Jennic Ltd, Furnival Street, Sheffield, S1 4QT, UK > > > > http://www.jennic.com Tel: +44 (0) 114 281 2655 Confidential > > > > _______________________________________________________________ > > > > > > > > > -----Original Message----- > > > > > From: ecos-discuss-owner@sources.redhat.com > > > > > [mailto:ecos-discuss-owner@sources.redhat.com]On Behalf Of Mahesh > > > > > Sent: 01 October 2003 06:12 > > > > > To: ecos > > > > > Subject: [ECOS] second alarm not triggering > > > > > > > > > > > > > > > Hi, > > > > > My first alarm is triggered but the second alarm is not triggering at > > > > > all.After the first alarm is triggered the tick function is not called > > > > > at all.What may be problem? > > > > > Thanks and Regards > > > > > Mahesh > > > > > > > > -- > > > Mahesh M Patil > > > Software Engineer > > > Cranes Software International Limited > > > VasanthNagar > > > Bangalore > > > Mobile:9845579634 > > > Office:2381740/1/2 Extn:234 > > > www.cranessoftware.com > > > > > > > > > _______________________________________________ > > > This email with any attachments is for the exclusive use of the intended > > > recipient/s & may contain confidential & legally privileged information. > > > If you are not the intended recipient pls notify the sender immediately > > > & delete the email from your system. Any unauthorised use, disclosure, > > > printing, dissemination, forwarding or copying of this mail is strictly > > > prohibited and unlawful. > > > Visit us at : http://www.cranessoftware.com > > > > > > > > > > > > -- > > > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos > > > and search the list archive: http://sources.redhat.com/ml/ecos-discuss > > > > -- > > Satish Kumar <satish@bvt.sc.sanyo.co.jp> > > > > > > -- > > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos > > and search the list archive: http://sources.redhat.com/ml/ecos-discuss > > > > > -- > Mahesh M Patil > Software Engineer > Cranes Software International Limited > VasanthNagar > Bangalore > Mobile:9845579634 > Office:2381740/1/2 Extn:234 > www.cranessoftware.com > > > _______________________________________________ > This email with any attachments is for the exclusive use of the intended > recipient/s & may contain confidential & legally privileged information. > If you are not the intended recipient pls notify the sender immediately > & delete the email from your system. Any unauthorised use, disclosure, > printing, dissemination, forwarding or copying of this mail is strictly > prohibited and unlawful. > Visit us at : http://www.cranessoftware.com > -- Satish Kumar <satish@bvt.sc.sanyo.co.jp> -- Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos and search the list archive: http://sources.redhat.com/ml/ecos-discuss ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <1065602343.1050.11.camel@MAHESH>]
* [ECOS] Spurious interrupt [not found] ` <1065602343.1050.11.camel@MAHESH> @ 2003-10-08 9:24 ` Mahesh 2003-10-08 10:18 ` Andrew Lunn 2003-10-09 0:42 ` Satish Kumar 0 siblings, 2 replies; 8+ messages in thread From: Mahesh @ 2003-10-08 9:24 UTC (permalink / raw) To: ecos Hi, I am using eCos for Arm pid target.I am using sid for printf's .I am working on PC only not on board.In my code i have 5 threads being created in cyg_user_start function.Alarm's are being used by the threads for some tasks.I am using real time clock for alarms.tick function is called after the scheduler is started,but once the first alarm is triggered,tick function is not called at all.So my second alarm(different from first one) is not triggering and the program is getting stuck. The program is going into spurious INTR code. What is this spurious interrupt? Is this the reason for tick function not to be called and second alarm not to be triggerd ? Plz reply for this mail. Thanks and Regards Mahesh -- Mahesh M Patil Software Engineer Cranes Software International Limited VasanthNagar Bangalore Mobile:9845579634 Office:2381740/1/2 Extn:234 www.cranessoftware.com -- Mahesh M Patil Software Engineer Cranes Software International Limited VasanthNagar Bangalore Mobile:9845579634 Office:2381740/1/2 Extn:234 www.cranessoftware.com _______________________________________________ This email with any attachments is for the exclusive use of the intended recipient/s & may contain confidential & legally privileged information. If you are not the intended recipient pls notify the sender immediately & delete the email from your system. Any unauthorised use, disclosure, printing, dissemination, forwarding or copying of this mail is strictly prohibited and unlawful. Visit us at : http://www.cranessoftware.com -- Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos and search the list archive: http://sources.redhat.com/ml/ecos-discuss ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [ECOS] Spurious interrupt 2003-10-08 9:24 ` [ECOS] Spurious interrupt Mahesh @ 2003-10-08 10:18 ` Andrew Lunn 2003-10-09 0:42 ` Satish Kumar 1 sibling, 0 replies; 8+ messages in thread From: Andrew Lunn @ 2003-10-08 10:18 UTC (permalink / raw) To: Mahesh; +Cc: ecos On Wed, Oct 08, 2003 at 02:09:56PM +0530, Mahesh wrote: > Hi, > > > I am using eCos for Arm pid target.I am using sid for printf's > .I am working on PC only not on board.In my code i have 5 threads being > created in cyg_user_start function.Alarm's are being used by the threads > for some tasks.I am using real time clock for alarms.tick function is > called after the scheduler is started,but once the first alarm is > triggered,tick function is not called at all.So my second > alarm(different from first one) is not triggering and the program is > getting stuck. > > The program is going into spurious INTR code. > What is this spurious interrupt? A spurious interrupt is an interrupt which eCos does not have a handler for. It does not know what to do with this interrupt. You need to find out what interrupt vector its on and then find out why sid is generating this interrupt. > Is this the reason for tick function not to be called and second alarm > not to be triggerd ? Could be. You will have to fix the spurious interrupt problem and see. Andrew -- Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos and search the list archive: http://sources.redhat.com/ml/ecos-discuss ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [ECOS] Spurious interrupt 2003-10-08 9:24 ` [ECOS] Spurious interrupt Mahesh 2003-10-08 10:18 ` Andrew Lunn @ 2003-10-09 0:42 ` Satish Kumar 1 sibling, 0 replies; 8+ messages in thread From: Satish Kumar @ 2003-10-09 0:42 UTC (permalink / raw) To: Mahesh; +Cc: ecos well, it seems that u have not defined the RTC interrupt vector in ur hal_platform_ints.h file.. firstly check if u r RTC interrupts are gettin invoked..? if yes the corresponding ISR routined should be called..put a breakpoint in ur ISR routine and debug ur code. this will help u to diagnose ur code.. satish On 08 Oct 2003 14:09:56 +0530 Mahesh <mahesh@cranessoftware.com> wrote: > Hi, > > > I am using eCos for Arm pid target.I am using sid for printf's > .I am working on PC only not on board.In my code i have 5 threads being > created in cyg_user_start function.Alarm's are being used by the threads > for some tasks.I am using real time clock for alarms.tick function is > called after the scheduler is started,but once the first alarm is > triggered,tick function is not called at all.So my second > alarm(different from first one) is not triggering and the program is > getting stuck. > > The program is going into spurious INTR code. > What is this spurious interrupt? > Is this the reason for tick function not to be called and second alarm > not to be triggerd ? > > > Plz reply for this mail. > Thanks and Regards > Mahesh > > -- > Mahesh M Patil > Software Engineer > Cranes Software International Limited > VasanthNagar > Bangalore > Mobile:9845579634 > Office:2381740/1/2 Extn:234 > www.cranessoftware.com > -- > Mahesh M Patil > Software Engineer > Cranes Software International Limited > VasanthNagar > Bangalore > Mobile:9845579634 > Office:2381740/1/2 Extn:234 > www.cranessoftware.com > > > _______________________________________________ > This email with any attachments is for the exclusive use of the intended > recipient/s & may contain confidential & legally privileged information. > If you are not the intended recipient pls notify the sender immediately > & delete the email from your system. Any unauthorised use, disclosure, > printing, dissemination, forwarding or copying of this mail is strictly > prohibited and unlawful. > Visit us at : http://www.cranessoftware.com > > > > -- > Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos > and search the list archive: http://sources.redhat.com/ml/ecos-discuss -- Satish Kumar <satish@bvt.sc.sanyo.co.jp> -- Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos and search the list archive: http://sources.redhat.com/ml/ecos-discuss ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2003-10-09 0:42 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <NMEDLDELHPEFHOMFIJBHMEPECOAA.rcc@jennic.com>
2003-10-01 8:31 ` [ECOS] second alarm not triggering Mahesh
2003-10-07 5:06 ` Mahesh
2003-10-07 5:12 ` Satish Kumar
2003-10-07 5:47 ` Mahesh
2003-10-07 5:54 ` Satish Kumar
[not found] ` <1065602343.1050.11.camel@MAHESH>
2003-10-08 9:24 ` [ECOS] Spurious interrupt Mahesh
2003-10-08 10:18 ` Andrew Lunn
2003-10-09 0:42 ` Satish Kumar
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).