From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (qmail 9446 invoked by alias); 21 Oct 2003 03:02:46 -0000 Mailing-List: contact ecos-discuss-help@sources.redhat.com; run by ezmlm Precedence: bulk List-Subscribe: List-Archive: List-Post: List-Help: , Sender: ecos-discuss-owner@sources.redhat.com Received: (qmail 9432 invoked from network); 21 Oct 2003 03:02:35 -0000 Received: from unknown (HELO smtp6.arnet.com.ar) (200.45.191.24) by sources.redhat.com with SMTP; 21 Oct 2003 03:02:35 -0000 Received: (qmail 15657 invoked from network); 21 Oct 2003 03:01:39 -0000 Received: ThePolice Version 0.02 by GCM Received: from unknown (HELO lucas.aimas) (200.82.110.196) by smtp6.arnet.com.ar with SMTP; 21 Oct 2003 03:01:38 -0000 Date: Tue, 21 Oct 2003 03:02:00 -0000 From: Lucas Aimaretto To: Lista Red Boot Message-Id: <20031021000333.71fb9b93.laima@interlap.com.ar> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Subject: [ECOS] accesing redboot via rs232 X-SW-Source: 2003-10/txt/msg00351.txt.bz2 hello there, i've compiled with (I believe) total success redboot for i386. I did that following the instructions of the ecos-user-guide. According to what this guide said, redboot, as default, includes serial (rs232) support and ethernet support (intel pro 10/100), for remote access. here is the problem. I tried to access this redboot booted pc thru any of the posibilities (serial, eth) but had no success at it. What's wrong?? I just followed the instrucionts of the guide. Do I need to set anything at compile time?. If so, what is the common setting to be included at compile time for remote access to be allowed. do I need to change anything at the Floppy.ecm file, for rs232 or eth support?? If so, how do I do it? for example, whenever i try to set an ip address, the system blocks and lots of ascii chars appear on the screen .... so, no ip address could be set. for serial access, I used hyperterminal (windows) for accesing via rs232 this pc, and configured it at 38400,8,N,1 but could not do it. no response .... conluding, the system boots up, the image is loaded into memory, but I can not access this pc remotely. I hope you can help me out with this. thank you regards lucas -- Before posting, please read the FAQ: http://sources.redhat.com/fom/ecos and search the list archive: http://sources.redhat.com/ml/ecos-discuss