* [ECOS] why i can not load file through redboot? [not found] <20040602103027.35368.qmail@eyou.com> @ 2004-06-02 2:30 ` zhuyong 2004-06-02 6:42 ` Laurent GONZALEZ 0 siblings, 1 reply; 2+ messages in thread From: zhuyong @ 2004-06-02 2:30 UTC (permalink / raw) To: ecos-discuss hi list, I have one worked redboot,but I can not use minicom to download file to ram, I use command as follows: + RedBoot(tm) bootstrap and debug environment [ROM] Non-certified release, version UNKNOWN - built 16:25:18, Jun 1 2004 Platform: Atmel AT91/EB40 (ARM7TDMI) Copyright (C) 2000, 2001, 2002, Red Hat, Inc. RAM: 0x02000000-0x02200000, [0x02006c40-0x02200000] available FLASH: 0x01000000 - 0x01100000, 16 blocks of 0x00010000 bytes each. redboot> load -r -v -b 0x02020000 -m xmodem and I choose xmodem and file(this file is uclinux.bin) and I have this info: Sending uclinux.bin,10121 blocks;Give your local XMODEM receive command now. Xmodem sectors/kbytes sent: 0/0kRetry 0: Got 08 for sector ACK Retry 0;Got 08 for sector ACK ...... Retry 0:NAK on sector Retry 0:Got 0d for sector ACK ..... what is my problem,i don't know.any advice will help me. regards zhuyong --http://www.eyou.com --Ãö¨¿Ã¿¿µÃµçÃÃÃà Ãä ÃïÃôÃüþ Ãö¯Ãéé ÃÃÃú·þÃñ ÃøÃç´æ´¢...ÃÃÃÃô¾¡ --http://vip.eyou.com --¿ì¿ìµÃüÃÃÃÃVIPÃà Ãä â²áÃúÃÃÃâµÃÃÃȤÃû -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [ECOS] why i can not load file through redboot? 2004-06-02 2:30 ` [ECOS] why i can not load file through redboot? zhuyong @ 2004-06-02 6:42 ` Laurent GONZALEZ 0 siblings, 0 replies; 2+ messages in thread From: Laurent GONZALEZ @ 2004-06-02 6:42 UTC (permalink / raw) To: zhuyong; +Cc: ecos-discuss On 2 Jun 2004 10:30:27 +0800 "zhuyong" <zhuyong0001@eyou.com> wrote: > hi list, > > I have one worked redboot,but I can not use minicom to download file > to ram, > > I use command as follows: > > + > RedBoot(tm) bootstrap and debug environment [ROM] > Non-certified release, version UNKNOWN - built 16:25:18, Jun 1 2004 > Platform: Atmel AT91/EB40 (ARM7TDMI) > Copyright (C) 2000, 2001, 2002, Red Hat, Inc. > RAM: 0x02000000-0x02200000, [0x02006c40-0x02200000] available > FLASH: 0x01000000 - 0x01100000, 16 blocks of 0x00010000 bytes each. This is a redboot of your own and it is running on custom hardware. Please tell the list what is your board and what differs from supported hardware. > redboot> load -r -v -b 0x02020000 -m xmodem > and I choose xmodem and file(this file is uclinux.bin) > and I have this info: > Sending uclinux.bin,10121 blocks;Give your local XMODEM receive > command now. Xmodem sectors/kbytes sent: 0/0kRetry 0: Got 08 for > sector ACK Retry 0;Got 08 for sector ACK > ...... > > what is my problem,i don't know.any advice will help me. There are many reasons to fail there : - bad amount of memory - bad configuration of EBI (timings) - overrun of an underclocked processor ... give the list more info then someone may help you. regards. -- GONZALEZ Laurent Silicomp Ingénierie Tel: 33 476 41 66 98 -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-06-02 6:42 UTC | newest] Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <20040602103027.35368.qmail@eyou.com> 2004-06-02 2:30 ` [ECOS] why i can not load file through redboot? zhuyong 2004-06-02 6:42 ` Laurent GONZALEZ
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).