* [ECOS] redboot on ixp422
@ 2004-08-12 8:08 Aric Wang
2004-08-12 8:24 ` Andrew Lunn
2004-08-12 12:49 ` Mark Salter
0 siblings, 2 replies; 3+ messages in thread
From: Aric Wang @ 2004-08-12 8:08 UTC (permalink / raw)
To: 'ecos-discuss@sources.redhat.com'
Hello,
I'm trying to port redboot to our customized IXP422 board. I use the latest
CVS version eCos and npe-package 1.4 from Intel. I compile use GRG board
configuration. It runs up.
The problem is it didn't find the ethernet ports and there's no "fis,
fconfig, ip_address" commands.
How to modify the npe package to make it run on IXP422? and why there's no
fis and fconfig command?
Thanks in advance.
Aric
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [ECOS] redboot on ixp422
2004-08-12 8:08 [ECOS] redboot on ixp422 Aric Wang
@ 2004-08-12 8:24 ` Andrew Lunn
2004-08-12 12:49 ` Mark Salter
1 sibling, 0 replies; 3+ messages in thread
From: Andrew Lunn @ 2004-08-12 8:24 UTC (permalink / raw)
To: Aric Wang; +Cc: 'ecos-discuss@sources.redhat.com'
> The problem is it didn't find the ethernet ports and there's no "fis,
> fconfig, ip_address" commands.
>
> How to modify the npe package to make it run on IXP422? and why there's no
> fis and fconfig command?
Adding the flash package should make the fis commands appear.
Andrew
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [ECOS] redboot on ixp422
2004-08-12 8:08 [ECOS] redboot on ixp422 Aric Wang
2004-08-12 8:24 ` Andrew Lunn
@ 2004-08-12 12:49 ` Mark Salter
1 sibling, 0 replies; 3+ messages in thread
From: Mark Salter @ 2004-08-12 12:49 UTC (permalink / raw)
To: Aric_Wang; +Cc: ecos-discuss
>>>>> Aric Wang writes:
> Hello,
> I'm trying to port redboot to our customized IXP422 board. I use the latest
> CVS version eCos and npe-package 1.4 from Intel. I compile use GRG board
> configuration. It runs up.
> The problem is it didn't find the ethernet ports and there's no "fis,
> fconfig, ip_address" commands.
How do you know that it didn't find the eth ports? Maybe it found the
ports, but the port initialization failed. You can define DEBUG in
if_npe.c to get some verbose error messages.
If fconfig and fis are missing, then you are not using the standard
GRG configuration which does enable flash.
> How to modify the npe package to make it run on IXP422?
You shouldn't have to modify it if you are using the GRG configuration.
If you are using a custom configuration, then you'd need to add
something similar to the devs/eth/arm/grg/npe package for your
platform.
--Mark
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2004-08-12 12:49 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-08-12 8:08 [ECOS] redboot on ixp422 Aric Wang
2004-08-12 8:24 ` Andrew Lunn
2004-08-12 12:49 ` Mark Salter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).