* Re: [ECOS] Regarding Flash Address to store ROMRAM startup application [not found] <20040811233541.61233.qmail@web53807.mail.yahoo.com> @ 2004-08-11 23:41 ` Gary Thomas 2004-08-12 0:55 ` [ECOS] Regarding Size of ROMRAM applications Giri Raja 0 siblings, 1 reply; 6+ messages in thread From: Gary Thomas @ 2004-08-11 23:41 UTC (permalink / raw) To: Giri Raja; +Cc: eCos Discussion On Wed, 2004-08-11 at 17:35, Giri Raja wrote: > Thanks Gary, I will incorporate it. If I set my jumper in the user > position, which address location in the flash should I program from? > I would presume the same as if you are programming RedBoot (but I have no experience with this board, so this is conjecture) > Thank you. > > Saranyan. > > Gary Thomas <gary@mlbassoc.com> wrote: > On Wed, 2004-08-11 at 14:19, Giri Raja wrote: > > Hi, > > I was experimenting to run a small application on > > the EB40A board without redboot on it. The idea is to > > make the application boot up by itself when powered > > on. > > I configured for ROMRAM startup type and disabled the > > 'Work with ROM Monitor' option in the config file. > > I compiled my application with this configuration and > > used OC Demon Flash Memory Programmer to store the > > executable in the flash (this is how I normally do for > > redboot and it works).when I powered it on, it doesn't > > seem to work. My jumper was set to the user position > > and there is absolutely nothing in the flash other > > than the executable I just loaded. > > Can someone please help me out on this. > > I found that I needed a few extra things set to make this > work: > > cdl_component CYGDBG_HAL_DIAG_TO_DEBUG_CHAN { > user_value 0 > }; > > cdl_option CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS { > user_value 0 > }; > > cdl_option CYGSEM_HAL_USE_ROM_MONITOR { > user_value 0 > }; > > -- > Gary Thomas > MLB Associates > > > ______________________________________________________________________ > Do you Yahoo!? > New and Improved Yahoo! Mail - 100MB free storage! -- Gary Thomas <gary@mlbassoc.com> MLB Associates -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* [ECOS] Regarding Size of ROMRAM applications 2004-08-11 23:41 ` [ECOS] Regarding Flash Address to store ROMRAM startup application Gary Thomas @ 2004-08-12 0:55 ` Giri Raja 2004-08-12 7:23 ` Andrew Lunn 0 siblings, 1 reply; 6+ messages in thread From: Giri Raja @ 2004-08-12 0:55 UTC (permalink / raw) To: ecos-discuss this is a continuation of my earlier mail in the day, but a slightly different question I have now. my ROMRAM application is about 600K. Is that really bif, I'm confused by this number. if it is ROMRAM startup type, I guess the program will never run as my RAM is only 256K. does this make any sense or am I wrong. I did try loading this application in the flash on the exact same location where I used to load redboot, it didn't run. Thank you. Saranyan. --- Gary Thomas <gary@mlbassoc.com> wrote: > On Wed, 2004-08-11 at 17:35, Giri Raja wrote: > > Thanks Gary, I will incorporate it. If I set my > jumper in the user > > position, which address location in the flash > should I program from? > > > > I would presume the same as if you are programming > RedBoot (but I have > no experience with this board, so this is > conjecture) > > > Thank you. > > > > Saranyan. > > > > Gary Thomas <gary@mlbassoc.com> wrote: > > On Wed, 2004-08-11 at 14:19, Giri Raja > wrote: > > > Hi, > > > I was experimenting to run a small > application on > > > the EB40A board without redboot on it. > The idea is to > > > make the application boot up by itself > when powered > > > on. > > > I configured for ROMRAM startup type and > disabled the > > > 'Work with ROM Monitor' option in the > config file. > > > I compiled my application with this > configuration and > > > used OC Demon Flash Memory Programmer to > store the > > > executable in the flash (this is how I > normally do for > > > redboot and it works).when I powered it > on, it doesn't > > > seem to work. My jumper was set to the > user position > > > and there is absolutely nothing in the > flash other > > > than the executable I just loaded. > > > Can someone please help me out on this. > > > > I found that I needed a few extra things > set to make this > > work: > > > > cdl_component > CYGDBG_HAL_DIAG_TO_DEBUG_CHAN { > > user_value 0 > > }; > > > > cdl_option > CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS { > > user_value 0 > > }; > > > > cdl_option CYGSEM_HAL_USE_ROM_MONITOR { > > user_value 0 > > }; > > > > -- > > Gary Thomas > > MLB Associates > > > > > > > ______________________________________________________________________ > > Do you Yahoo!? > > New and Improved Yahoo! Mail - 100MB free storage! > -- > Gary Thomas <gary@mlbassoc.com> > MLB Associates > > > -- > Before posting, please read the FAQ: > http://ecos.sourceware.org/fom/ecos > and search the list archive: > http://ecos.sourceware.org/ml/ecos-discuss > > __________________________________ Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! http://promotions.yahoo.com/new_mail -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] Regarding Size of ROMRAM applications 2004-08-12 0:55 ` [ECOS] Regarding Size of ROMRAM applications Giri Raja @ 2004-08-12 7:23 ` Andrew Lunn 2004-08-12 15:49 ` Giri Raja 0 siblings, 1 reply; 6+ messages in thread From: Andrew Lunn @ 2004-08-12 7:23 UTC (permalink / raw) To: Giri Raja; +Cc: ecos-discuss On Wed, Aug 11, 2004 at 05:55:41PM -0700, Giri Raja wrote: > this is a continuation of my earlier mail in the day, > but a slightly different question I have now. > my ROMRAM application is about 600K. Is that really > bif, I'm confused by this number. if it is ROMRAM > startup type, I guess the program will never run as my > RAM is only 256K. does this make any sense or am I > wrong. What is telling you it is 600K? arm-elf-size? Or is that the size of the binary produced by objcopy? Sometimes the binary has big holes in it because objcopy or the linker script is confused. Andrew -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] Regarding Size of ROMRAM applications 2004-08-12 7:23 ` Andrew Lunn @ 2004-08-12 15:49 ` Giri Raja 2004-08-12 15:54 ` Gary Thomas 0 siblings, 1 reply; 6+ messages in thread From: Giri Raja @ 2004-08-12 15:49 UTC (permalink / raw) To: ecos-discuss; +Cc: Andrew Lunn My bad, I didn't use the arm-elf-size. I actually clicked on the properties button on the windows machine and it showed me the file size as 600K. But this is what arm-elf-size gives me: text data bss dec hex filename 23308 936 23932 48176 bc30 standalone_serial I tried both ROM and ROMRAM options. It doesn't seem to load from the flash at all. Is there anything that I need to modify on the memory map files. I'm using EB40A board. Thanks. Giri. --- Andrew Lunn <andrew@lunn.ch> wrote: > On Wed, Aug 11, 2004 at 05:55:41PM -0700, Giri Raja > wrote: > > this is a continuation of my earlier mail in the > day, > > but a slightly different question I have now. > > my ROMRAM application is about 600K. Is that > really > > bif, I'm confused by this number. if it is ROMRAM > > startup type, I guess the program will never run > as my > > RAM is only 256K. does this make any sense or am I > > wrong. > > What is telling you it is 600K? arm-elf-size? Or is > that the size of > the binary produced by objcopy? > > Sometimes the binary has big holes in it because > objcopy or the linker > script is confused. > > Andrew > > -- > Before posting, please read the FAQ: > http://ecos.sourceware.org/fom/ecos > and search the list archive: > http://ecos.sourceware.org/ml/ecos-discuss > > __________________________________ Do you Yahoo!? Y! Messenger - Communicate in real time. Download now. http://messenger.yahoo.com -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] Regarding Size of ROMRAM applications 2004-08-12 15:49 ` Giri Raja @ 2004-08-12 15:54 ` Gary Thomas 2004-08-12 17:00 ` Giri Raja 0 siblings, 1 reply; 6+ messages in thread From: Gary Thomas @ 2004-08-12 15:54 UTC (permalink / raw) To: Giri Raja; +Cc: eCos Discussion, Andrew Lunn On Thu, 2004-08-12 at 09:49, Giri Raja wrote: > My bad, I didn't use the arm-elf-size. I actually > clicked on the properties button on the windows > machine and it showed me the file size as 600K. But > this is what arm-elf-size gives me: > > text data bss dec hex filename > 23308 936 23932 48176 bc30 > standalone_serial > > I tried both ROM and ROMRAM options. It doesn't seem > to load from the flash at all. Is there anything that > I need to modify on the memory map files. I'm using > EB40A board. > Did you start from a fresh (i.e. clean tree) build? It's been my experience that once I build for one startup type, if I change the configuration to another, things don't go right. So, I always start afresh if I'm going to try a different startup mode. > Thanks. > > Giri. > > --- Andrew Lunn <andrew@lunn.ch> wrote: > > > On Wed, Aug 11, 2004 at 05:55:41PM -0700, Giri Raja > > wrote: > > > this is a continuation of my earlier mail in the > > day, > > > but a slightly different question I have now. > > > my ROMRAM application is about 600K. Is that > > really > > > bif, I'm confused by this number. if it is ROMRAM > > > startup type, I guess the program will never run > > as my > > > RAM is only 256K. does this make any sense or am I > > > wrong. > > > > What is telling you it is 600K? arm-elf-size? Or is > > that the size of > > the binary produced by objcopy? > > > > Sometimes the binary has big holes in it because > > objcopy or the linker > > script is confused. > > > > Andrew > > > > -- > > Before posting, please read the FAQ: > > http://ecos.sourceware.org/fom/ecos > > and search the list archive: > > http://ecos.sourceware.org/ml/ecos-discuss > > > > > > > > > __________________________________ > Do you Yahoo!? > Y! Messenger - Communicate in real time. Download now. > http://messenger.yahoo.com -- Gary Thomas <gary@chez-thomas.org> -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] Regarding Size of ROMRAM applications 2004-08-12 15:54 ` Gary Thomas @ 2004-08-12 17:00 ` Giri Raja 0 siblings, 0 replies; 6+ messages in thread From: Giri Raja @ 2004-08-12 17:00 UTC (permalink / raw) To: ecos-discuss; +Cc: Gary Thomas No luck again. Should the board have some sort of monitor program, or the application in ROMRAM mode by itself includes routines to load in the RAM? Thanks. Giri. --- Gary Thomas <gary@chez-thomas.org> wrote: > On Thu, 2004-08-12 at 09:49, Giri Raja wrote: > > My bad, I didn't use the arm-elf-size. I actually > > clicked on the properties button on the windows > > machine and it showed me the file size as 600K. > But > > this is what arm-elf-size gives me: > > > > text data bss dec hex filename > > 23308 936 23932 48176 bc30 > > standalone_serial > > > > I tried both ROM and ROMRAM options. It doesn't > seem > > to load from the flash at all. Is there anything > that > > I need to modify on the memory map files. I'm > using > > EB40A board. > > > > Did you start from a fresh (i.e. clean tree) build? > It's been > my experience that once I build for one startup > type, if I change > the configuration to another, things don't go right. > So, I always > start afresh if I'm going to try a different startup > mode. > > > Thanks. > > > > Giri. > > > > --- Andrew Lunn <andrew@lunn.ch> wrote: > > > > > On Wed, Aug 11, 2004 at 05:55:41PM -0700, Giri > Raja > > > wrote: > > > > this is a continuation of my earlier mail in > the > > > day, > > > > but a slightly different question I have now. > > > > my ROMRAM application is about 600K. Is that > > > really > > > > bif, I'm confused by this number. if it is > ROMRAM > > > > startup type, I guess the program will never > run > > > as my > > > > RAM is only 256K. does this make any sense or > am I > > > > wrong. > > > > > > What is telling you it is 600K? arm-elf-size? Or > is > > > that the size of > > > the binary produced by objcopy? > > > > > > Sometimes the binary has big holes in it because > > > objcopy or the linker > > > script is confused. > > > > > > Andrew > > > > > > -- > > > Before posting, please read the FAQ: > > > http://ecos.sourceware.org/fom/ecos > > > and search the list archive: > > > http://ecos.sourceware.org/ml/ecos-discuss > > > > > > > > > > > > > > > > __________________________________ > > Do you Yahoo!? > > Y! Messenger - Communicate in real time. Download > now. > > http://messenger.yahoo.com > -- > Gary Thomas <gary@chez-thomas.org> > > > -- > Before posting, please read the FAQ: > http://ecos.sourceware.org/fom/ecos > and search the list archive: > http://ecos.sourceware.org/ml/ecos-discuss > > __________________________________ Do you Yahoo!? Yahoo! Mail - 50x more storage than other providers! http://promotions.yahoo.com/new_mail -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-08-12 17:00 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <20040811233541.61233.qmail@web53807.mail.yahoo.com> 2004-08-11 23:41 ` [ECOS] Regarding Flash Address to store ROMRAM startup application Gary Thomas 2004-08-12 0:55 ` [ECOS] Regarding Size of ROMRAM applications Giri Raja 2004-08-12 7:23 ` Andrew Lunn 2004-08-12 15:49 ` Giri Raja 2004-08-12 15:54 ` Gary Thomas 2004-08-12 17:00 ` Giri Raja
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).