From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (qmail 8485 invoked by alias); 9 Jun 2006 13:45:34 -0000 Received: (qmail 8423 invoked by uid 22791); 9 Jun 2006 13:45:25 -0000 X-Spam-Check-By: sourceware.org Received: from gemmini.netco.de (HELO gemmini.netco.de) (82.100.245.3) by sourceware.org (qpsmtpd/0.31) with ESMTP; Fri, 09 Jun 2006 13:44:07 +0000 Received: from taurus (unknown [82.100.245.2]) by gemmini.netco.de (Mailserver NetCo GmbH) with ESMTP id 60C2C215BC0; Fri, 9 Jun 2006 15:29:15 +0200 (CEST) From: "Ram Sudhir Tadavarthi" To: "'Socrates Socrates'" Cc: Date: Fri, 09 Jun 2006 13:45:00 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit X-Mailer: Microsoft Office Outlook, Build 11.0.6353 In-Reply-To: Message-Id: <20060609132915.60C2C215BC0@gemmini.netco.de> Mailing-List: contact ecos-discuss-help@ecos.sourceware.org; run by ezmlm Precedence: bulk List-Subscribe: List-Archive: List-Post: List-Help: , Sender: ecos-discuss-owner@ecos.sourceware.org Subject: AW: [ECOS] Huge memory footprint for a simple "hello world" X-SW-Source: 2006-06/txt/msg00095.txt.bz2 > Hi Ram; > > I checked on Port B there's nothing coming out. The setup is :I have > Port A connected to one machine from which I upload the application > (bin_sim0) and port B connected to some other machine to see if > anything comes out. From both machines nothing comes out. But if the > application is redboot.elf I do see output on Port A only. [Ram ] ok!!! 1.Instead of using gdb, can you try to load the image through redboot using "load" command and test? 2.Can you check if there is any signal movement on your serial port using an oscilloscope or similar ? 3.Can you verify your virtual vectors configuration? Do these tests and post the results here if you still have problem. Hope it helps, ram -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss