From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabrice Gautier To: Fabrice Gautier , "Ecos-List (E-mail)" Subject: RE: [ECOS] Fast serial debugging Date: Wed, 26 Jul 2000 16:45:00 -0000 Message-id: <21DDE8E5343ED411840A00A0CC3340201047FB@EXCHANGE5_5> X-SW-Source: 2000-07/msg00266.html > -----Original Message----- > From: Fabrice Gautier [ mailto:Fabrice_Gautier@sdesigns.com ] > Subject: RE: [ECOS] Fast serial debugging > > Well, finally I succeded in running at 57600 (I will try at 115200). I > recompiled the stubs with a new build tree. > It's look like there is something wrong with the Config tool > when changing > the configuration. But it may be also that I did something wrong when > flashing and connecting GDB. One more important thing to do in order to have full debugging support is to set the baud rate of your eCos library to the same that you set the GDB stub. I suspect this is only required when you have the stub included in the HAL. If I don't do that I'm still abble to connect and load put GDB hangs when I run. A+ Regards -- Fabrice Gautier fabrice_gautier@sdesigns.com