public inbox for ecos-discuss@sourceware.org
 help / color / mirror / Atom feed
* [ECOS] Problem while running the eCos tests
@ 2000-07-05  6:10 Andreas.Karlsson
  2000-07-05  7:31 ` Jesper Skov
  0 siblings, 1 reply; 2+ messages in thread
From: Andreas.Karlsson @ 2000-07-05  6:10 UTC (permalink / raw)
  To: ecos-discuss

When using the Configuration Tool for running tests the following output is
received.
I've changed the EcOS HAL target setup for my AEB to rev C.

*** 14:59:16 Run started
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "--host=i686-pc-cygwin --target=arm-elf"...
(gdb) set height 0
(gdb) set remotedebug 0
Warning: command 'set remotedebug' is deprecated.
Use 'set debug remote'.

(gdb) set remotebaud 38400
(gdb) target remote com1
Remote debugging using com1
0x401a604 in ?? ()
(gdb) load
Loading section .rom_vectors, size 0x60 lma 0xc000
Loading section .text, size 0x4e00 lma 0xc060
Loading section .rodata, size 0x410 lma 0x10e60
Loading section .data, size 0x260 lma 0x11270
Start address 0xc060 , load size 21712
Transfer rate: 28949 bits/sec, 301 bytes/write.
(gdb) break cyg_test_exit
Breakpoint 1 at 0xdff0: file
//D/PROGRA~1/REDHAT~1/eCos/packages/infra/v1_3_1/src/tcdiag.cxx, line 116.
(gdb) break cyg_assert_fail
Function "cyg_assert_fail" not defined.
(gdb) break cyg_test_init
Breakpoint 2 at 0xdef8: file
//D/PROGRA~1/REDHAT~1/eCos/packages/infra/v1_3_1/src/tcdiag.cxx, line 62.
(gdb) cont
Continuing.

*** Timeout - MAX inactive time 30.0 exceeds limit of 30.0

/Andreas

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [ECOS] Problem while running the eCos tests
  2000-07-05  6:10 [ECOS] Problem while running the eCos tests Andreas.Karlsson
@ 2000-07-05  7:31 ` Jesper Skov
  0 siblings, 0 replies; 2+ messages in thread
From: Jesper Skov @ 2000-07-05  7:31 UTC (permalink / raw)
  To: Andreas.Karlsson; +Cc: ecos-discuss

>>>>> "Andreas" == Andreas Karlsson <Andreas.Karlsson@combitechsystems.com> writes:

Andreas> When using the Configuration Tool for running tests the
Andreas> following output is received.  I've changed the EcOS HAL
Andreas> target setup for my AEB to rev C.

which test is it?

did you change any other options than that selecting the revision?

try running it manually from GDB.

Jesper

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2000-07-05  7:31 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-07-05  6:10 [ECOS] Problem while running the eCos tests Andreas.Karlsson
2000-07-05  7:31 ` Jesper Skov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).