Re: [ECOS] PowerPC Redboot porting problems

["Tales Toledo" <toledo.tales@gmail.com>]

Hi,

I see some progress now.
I was downloading .bin file to 0x0 (the same procedure I was using
before when I tried to download code to RAM an programming to flash).
I decide to move from .bin to .elf and voilá...

Now I have a new  message

--------------------------------------------------------------
Program received signal SIGINT, Interrupt.
CR := (CR0|4CR1|8CR2|12CR3|16CR4|20CR5|24CR6|28CR7)
SPR 2:Condition Register, UM140
CR = 0x2042488d =
(CR0=0x2|CR1=0x0|CR2=0x4|CR3=0x2|CR4=0x4|CR5=0x8|CR6=0x8|CR7=0xd)
ICR := (|RST|CHSTP|MCI||6EXTI|ALI|PRI|FPUVI|DECI||13SYSI|TR||17SEI|ITLBMS|DTBLMS|ITLBER|DTLBER||28LBRK|IBRK|EBRK|DPI)
SPR 148:Interrupt Cause Register, UM994
ICR = 0x00004000 = (SEI)
0x4b6c0 in hal_hardware_init ()
---------------------------------------------------------------

looking at disassembled file

---------------------------------------------------------------
4b6b8:	90 64 01 74 	stw	r3,372(r4)
   4b6bc:	3c 60 40 00 	lis	r3,16384
   4b6c0:	60 63 08 01 	ori	r3,r3,2049
   4b6c4:	3c a0 ff 80 	lis	r5,-128
   4b6c8:	60 a5 07 74 	ori	r5,r5,1908
   4b6cc:	90 64 01 00 	stw	r3,256(r4)
   4b6d0:	90 a4 01 04 	stw	r5,260(r4)
   4b6d4:	3c 60 00 00 	lis	r3,0
   4b6d8:	60 63 00 81 	ori	r3,r3,129
   4b6dc:	3c a0 ff 80 	lis	r5,-128
   4b6e0:	60 a5 0e 00 	ori	r5,r5,3584
   4b6e4:	90 64 01 08 	stw	r3,264(r4)
   4b6e8:	90 a4 01 0c 	stw	r5,268(r4)
---------------------------------------------------------------

seems that the exception occurs when I'm programming BR0/OR0

-------------------------------------------
	/*
	 * Base Register initialization.
	 */

       	/* BOOT ROM */
        lwi	r3,0x40000801	# 16-bit, GPCM
        lwi	r5,0xFF800774   # 7 wait states, up to 8MB
        stw	r3,BR0(r4)
        stw	r5,OR0(r4)

	/* ONBOARD SDRAM */
        lwi	r3,0x00000081	# 32-bit, UPMA
        lwi	r5,0xFF800E00
        stw	r3,BR1(r4)
        stw	r5,OR1(r4)
-----------------------------------------------

I didn't see the problem yet. Any idea.

Thanks,
TT.


On 6/20/07, Gary Thomas <gary@mlbassoc.com> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Tales Toledo wrote:
> > Hi,
> >
> > I'm facing some problems trying to port redboot to MPC885...
> > I have tried to follow the steps suggested at porting guide. I'm using only
> > RAM as a first step but unfortunately I can get success. I'm using
> > Viper files as reference.
> >
> > I'm using gdb with mpcbdm and get always the same exception when
> > running it from RAM.
>
> Look carefully - this is failing on the first instruction you downloaded,
> so it most certainly has nothing to do with porting eCos.
>   * Have you verified the code that was downloaded correctly?
>   * Have you successfully executed any code on this platform using these tools?
>
> - --
> - ------------------------------------------------------------
> Gary Thomas                 |  Consulting for the
> MLB Associates              |    Embedded world
> - ------------------------------------------------------------
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.7 (GNU/Linux)
> Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
>
> iD8DBQFGeY4YmaKbSsQGV8ARAirMAJ9xEKtFrDXYOh5jB59disiPExgbUgCgjT0j
> xmJBNpW1xfQruVljpMs/JrY=
> =/UuG
> -----END PGP SIGNATURE-----
>

--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss