* Re: [ECOS] Serial problems on i386 PC
@ 2001-06-14 6:55 Bert-Ola Persson (ECS)
0 siblings, 0 replies; 6+ messages in thread
From: Bert-Ola Persson (ECS) @ 2001-06-14 6:55 UTC (permalink / raw)
To: 'ecos-discuss@sourceware.cygnus.com'
Cc: 'jlarmour@redhat.com', 'borg@int.spb.ru'
> "Boris V. Guzhov" wrote:
> >
> > Hello,
> > I too have confronted with this problem.
> >
> > It happens always if the serial driver simultaneously transmits
> >
> > and receives the bytes (for example: usage of an external loopback).
>
> Does this still happen after all the updates made last Friday in CVS?
>
> And Bert, similarly are you using the current CVS code?
>
> Jifl
> --
> Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
> Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine
> Come to the Red Hat TechWorld open source conference in Brussels!
> Keynotes, techie talks and exhibitions http://www.redhat-techworld.com/
>
Hello Jonathan,
I have tried the latest CVS code.
Now the serial communication works on the i386 platform, as far as I can see.
Communicated both nonblocking and blocking at 115200 baud on port 1.
Downloaded my software with Reedboot, both on a virtual PC in VMware and a real PC and it works fine.
Best regards
Bert-Ola Persson
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: [ECOS] Serial problems on i386 PC
@ 2001-06-14 1:28 Dennis Ehlin (ECS)
0 siblings, 0 replies; 6+ messages in thread
From: Dennis Ehlin (ECS) @ 2001-06-14 1:28 UTC (permalink / raw)
To: ecos-discuss
I have also observed the same problem on the Powerpc platform!
//Dennis
-----Original Message-----
From: Boris V. Guzhov [ mailto:borg@int.spb.ru ]
Sent: Thursday, June 14, 2001 9:21 AM
To: ecos-discuss@sourceware.cygnus.com
Subject: Re: [ECOS] Serial problems on i386 PC
Unfortunately I used earlier CVS code. I shall try the latest update a
little later.
--
Boris Guzhov,
St.Petersburg, Russia
> Does this still happen after all the updates made last Friday in CVS?
>
> And Bert, similarly are you using the current CVS code?
>
> Jifl
> --
> Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
> Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine
> Come to the Red Hat TechWorld open source conference in Brussels!
> Keynotes, techie talks and exhibitions http://www.redhat-techworld.com/
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] Serial problems on i386 PC
2001-06-13 11:22 ` Jonathan Larmour
@ 2001-06-14 0:25 ` Boris V. Guzhov
0 siblings, 0 replies; 6+ messages in thread
From: Boris V. Guzhov @ 2001-06-14 0:25 UTC (permalink / raw)
To: ecos-discuss
Unfortunately I used earlier CVS code. I shall try the latest update a
little later.
--
Boris Guzhov,
St.Petersburg, Russia
> Does this still happen after all the updates made last Friday in CVS?
>
> And Bert, similarly are you using the current CVS code?
>
> Jifl
> --
> Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
> Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine
> Come to the Red Hat TechWorld open source conference in Brussels!
> Keynotes, techie talks and exhibitions http://www.redhat-techworld.com/
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] Serial problems on i386 PC
2001-06-13 0:45 ` Boris V. Guzhov
@ 2001-06-13 11:22 ` Jonathan Larmour
2001-06-14 0:25 ` Boris V. Guzhov
0 siblings, 1 reply; 6+ messages in thread
From: Jonathan Larmour @ 2001-06-13 11:22 UTC (permalink / raw)
To: Boris V. Guzhov; +Cc: ecos-discuss, Bert-Ola Persson
"Boris V. Guzhov" wrote:
>
> Hello,
> I too have confronted with this problem.
>
> It happens always if the serial driver simultaneously transmits
>
> and receives the bytes (for example: usage of an external loopback).
Does this still happen after all the updates made last Friday in CVS?
And Bert, similarly are you using the current CVS code?
Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine
Come to the Red Hat TechWorld open source conference in Brussels!
Keynotes, techie talks and exhibitions http://www.redhat-techworld.com/
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] Serial problems on i386 PC
2001-06-12 14:51 Bert-Ola Persson
@ 2001-06-13 0:45 ` Boris V. Guzhov
2001-06-13 11:22 ` Jonathan Larmour
0 siblings, 1 reply; 6+ messages in thread
From: Boris V. Guzhov @ 2001-06-13 0:45 UTC (permalink / raw)
To: ecos-discuss
Hello,
I too have confronted with this problem.
It happens always if the serial driver simultaneously transmits
and receives the bytes (for example: usage of an external loopback).
--
Best Regards.
Boris Guzhov,
St.Petersburg, Russia
----- Original Message -----
From: "Bert-Ola Persson" <bert-ola.persson@oreline.net>
To: <ecos-discuss@sources.redhat.com>
Sent: 13 June, 2001 01:48
Subject: [ECOS] Serial problems on i386 PC
> Hello,
> I got a problem to make the serial communication to work as it shuld on
i386
> PC.
> I am running the debugg/download stuff on port 0 and other stuff on port
1
> The problem is that it seams that when after reciving a few bytes on port
1
> it all hang.
> Have checked Tx and it works as it shuld, but as soon as I do Rx it
> chrashes.
> Looks to me like some problems with interrupts DSR calls or something that
> is not done in proper way.
> The port 1 is configured as nonblocking both TX and RX, 115200,8,1.
>
> Do you have the solution to this problem?
>
> Best Regards
> Bert
>
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* [ECOS] Serial problems on i386 PC
@ 2001-06-12 14:51 Bert-Ola Persson
2001-06-13 0:45 ` Boris V. Guzhov
0 siblings, 1 reply; 6+ messages in thread
From: Bert-Ola Persson @ 2001-06-12 14:51 UTC (permalink / raw)
To: ecos-discuss
Hello,
I got a problem to make the serial communication to work as it shuld on i386
PC.
I am running the debugg/download stuff on port 0 and other stuff on port 1
The problem is that it seams that when after reciving a few bytes on port 1
it all hang.
Have checked Tx and it works as it shuld, but as soon as I do Rx it
chrashes.
Looks to me like some problems with interrupts DSR calls or something that
is not done in proper way.
The port 1 is configured as nonblocking both TX and RX, 115200,8,1.
Do you have the solution to this problem?
Best Regards
Bert
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2001-06-14 6:55 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-06-14 6:55 [ECOS] Serial problems on i386 PC Bert-Ola Persson (ECS)
-- strict thread matches above, loose matches on Subject: below --
2001-06-14 1:28 Dennis Ehlin (ECS)
2001-06-12 14:51 Bert-Ola Persson
2001-06-13 0:45 ` Boris V. Guzhov
2001-06-13 11:22 ` Jonathan Larmour
2001-06-14 0:25 ` Boris V. Guzhov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).