* [ECOS] why i can not load file through redboot?
[not found] <20040602103027.35368.qmail@eyou.com>
@ 2004-06-02 2:30 ` zhuyong
2004-06-02 6:42 ` Laurent GONZALEZ
0 siblings, 1 reply; 2+ messages in thread
From: zhuyong @ 2004-06-02 2:30 UTC (permalink / raw)
To: ecos-discuss
hi list,
I have one worked redboot,but I can not use minicom to download file to ram,
I use command as follows:
+
RedBoot(tm) bootstrap and debug environment [ROM]
Non-certified release, version UNKNOWN - built 16:25:18, Jun 1 2004
Platform: Atmel AT91/EB40 (ARM7TDMI)
Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
RAM: 0x02000000-0x02200000, [0x02006c40-0x02200000] available
FLASH: 0x01000000 - 0x01100000, 16 blocks of 0x00010000 bytes each.
redboot> load -r -v -b 0x02020000 -m xmodem
and I choose xmodem and file(this file is uclinux.bin)
and I have this info:
Sending uclinux.bin,10121 blocks;Give your local XMODEM receive command now.
Xmodem sectors/kbytes sent: 0/0kRetry 0: Got 08 for sector ACK
Retry 0;Got 08 for sector ACK
......
Retry 0:NAK on sector
Retry 0:Got 0d for sector ACK
.....
what is my problem,i don't know.any advice will help me.
regards
zhuyong
--http://www.eyou.com
--Ãö¨¿Ã¿¿µÃµçÃÃÃÃ
Ãä ÃïÃôÃüþ Ãö¯Ãéé ÃÃÃú·þÃñ ÃøÃç´æ´¢...ÃÃÃÃô¾¡
--http://vip.eyou.com
--¿ì¿ìµÃüÃÃÃÃVIPÃÃ
Ãä â²áÃúÃÃÃâµÃÃÃȤÃû
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [ECOS] why i can not load file through redboot?
2004-06-02 2:30 ` [ECOS] why i can not load file through redboot? zhuyong
@ 2004-06-02 6:42 ` Laurent GONZALEZ
0 siblings, 0 replies; 2+ messages in thread
From: Laurent GONZALEZ @ 2004-06-02 6:42 UTC (permalink / raw)
To: zhuyong; +Cc: ecos-discuss
On 2 Jun 2004 10:30:27 +0800
"zhuyong" <zhuyong0001@eyou.com> wrote:
> hi list,
>
> I have one worked redboot,but I can not use minicom to download file
> to ram,
>
> I use command as follows:
>
> +
> RedBoot(tm) bootstrap and debug environment [ROM]
> Non-certified release, version UNKNOWN - built 16:25:18, Jun 1 2004
> Platform: Atmel AT91/EB40 (ARM7TDMI)
> Copyright (C) 2000, 2001, 2002, Red Hat, Inc.
> RAM: 0x02000000-0x02200000, [0x02006c40-0x02200000] available
> FLASH: 0x01000000 - 0x01100000, 16 blocks of 0x00010000 bytes each.
This is a redboot of your own and it is running on custom hardware.
Please tell the list what is your board and what differs from supported
hardware.
> redboot> load -r -v -b 0x02020000 -m xmodem
> and I choose xmodem and file(this file is uclinux.bin)
> and I have this info:
> Sending uclinux.bin,10121 blocks;Give your local XMODEM receive
> command now. Xmodem sectors/kbytes sent: 0/0kRetry 0: Got 08 for
> sector ACK Retry 0;Got 08 for sector ACK
> ......
>
> what is my problem,i don't know.any advice will help me.
There are many reasons to fail there :
- bad amount of memory
- bad configuration of EBI (timings)
- overrun of an underclocked processor
...
give the list more info then someone may help you.
regards.
--
GONZALEZ Laurent
Silicomp Ingénierie
Tel: 33 476 41 66 98
--
Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-06-02 6:42 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <20040602103027.35368.qmail@eyou.com>
2004-06-02 2:30 ` [ECOS] why i can not load file through redboot? zhuyong
2004-06-02 6:42 ` Laurent GONZALEZ
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).