* [ECOS] jffs2 filesystem with redboot @ 2008-07-24 15:22 Tiju Jacob 2008-07-24 15:26 ` Gary Thomas 0 siblings, 1 reply; 6+ messages in thread From: Tiju Jacob @ 2008-07-24 15:22 UTC (permalink / raw) To: ecos-discuss Hi all, I have a freescale based development board. I am trying to boot from nand using redboot. My queries are: 1. How would I enable the nand flash in redboot? 2. How to integrate jffs2 filesystem with redboot? 3. If integrated will I be able to write, read, erase files in the nand flash? 4. How could I enable the support for these functionalities? Please also give me links to where I would be able to get more information regarding this. Thanks in advance. TJ -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] jffs2 filesystem with redboot 2008-07-24 15:22 [ECOS] jffs2 filesystem with redboot Tiju Jacob @ 2008-07-24 15:26 ` Gary Thomas [not found] ` <2b49c3100807241004j530b4243n88233f11606993a3@mail.gmail.com> 0 siblings, 1 reply; 6+ messages in thread From: Gary Thomas @ 2008-07-24 15:26 UTC (permalink / raw) To: Tiju Jacob; +Cc: ecos-discuss Tiju Jacob wrote: > Hi all, > > I have a freescale based development board. I am trying to boot from > nand using redboot. My queries are: > > 1. How would I enable the nand flash in redboot? > 2. How to integrate jffs2 filesystem with redboot? > 3. If integrated will I be able to write, read, erase files in the nand flash? > 4. How could I enable the support for these functionalities? > What kind of Freescale development board is it? Where did you get the RedBoot/eCos sources (if not from the public CVS tree)? -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <2b49c3100807241004j530b4243n88233f11606993a3@mail.gmail.com>]
* Re: [ECOS] jffs2 filesystem with redboot [not found] ` <2b49c3100807241004j530b4243n88233f11606993a3@mail.gmail.com> @ 2008-07-24 17:11 ` Gary Thomas 2008-07-24 17:39 ` Tiju Jacob 0 siblings, 1 reply; 6+ messages in thread From: Gary Thomas @ 2008-07-24 17:11 UTC (permalink / raw) To: Tiju Jacob; +Cc: eCos Discussion Tiju Jacob wrote: > It is a mx27 ADS based board. The redboot/eCos sources were given by Freescale. Please keep replies on the eCos list so that all may benefit. AFAIK, that port only supports the NOR FLASH on the board. If you want to add NAND, you'll need to write the drivers, etc, yourself. There has been much discussion on this topic of late; check the archives. > On Thu, Jul 24, 2008 at 8:56 PM, Gary Thomas <gary@mlbassoc.com> wrote: >> Tiju Jacob wrote: >>> Hi all, >>> >>> I have a freescale based development board. I am trying to boot from >>> nand using redboot. My queries are: >>> >>> 1. How would I enable the nand flash in redboot? >>> 2. How to integrate jffs2 filesystem with redboot? >>> 3. If integrated will I be able to write, read, erase files in the nand >>> flash? >>> 4. How could I enable the support for these functionalities? >>> >> What kind of Freescale development board is it? >> Where did you get the RedBoot/eCos sources (if not from the public CVS >> tree)? -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] jffs2 filesystem with redboot 2008-07-24 17:11 ` Gary Thomas @ 2008-07-24 17:39 ` Tiju Jacob 2008-07-24 22:25 ` Gary Thomas 0 siblings, 1 reply; 6+ messages in thread From: Tiju Jacob @ 2008-07-24 17:39 UTC (permalink / raw) To: Gary Thomas; +Cc: eCos Discussion Hi Gary, After redboot boots thriugh nor, i think we can change the boot to nand and restart/boot through nand. rit? Could u please forward me the archives where these were discussed? I tried searching but cud'nt find any. Thanks, TJ On Thu, Jul 24, 2008 at 10:41 PM, Gary Thomas <gary@mlbassoc.com> wrote: > Tiju Jacob wrote: >> >> It is a mx27 ADS based board. The redboot/eCos sources were given by >> Freescale. > > Please keep replies on the eCos list so that all may benefit. > > AFAIK, that port only supports the NOR FLASH on the board. If you want > to add NAND, you'll need to write the drivers, etc, yourself. There > has been much discussion on this topic of late; check the archives. > >> On Thu, Jul 24, 2008 at 8:56 PM, Gary Thomas <gary@mlbassoc.com> wrote: >>> >>> Tiju Jacob wrote: >>>> >>>> Hi all, >>>> >>>> I have a freescale based development board. I am trying to boot from >>>> nand using redboot. My queries are: >>>> >>>> 1. How would I enable the nand flash in redboot? >>>> 2. How to integrate jffs2 filesystem with redboot? >>>> 3. If integrated will I be able to write, read, erase files in the nand >>>> flash? >>>> 4. How could I enable the support for these functionalities? >>>> >>> What kind of Freescale development board is it? >>> Where did you get the RedBoot/eCos sources (if not from the public CVS >>> tree)? > > -- > ------------------------------------------------------------ > Gary Thomas | Consulting for the > MLB Associates | Embedded world > ------------------------------------------------------------ > -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] jffs2 filesystem with redboot 2008-07-24 17:39 ` Tiju Jacob @ 2008-07-24 22:25 ` Gary Thomas 2008-07-27 15:42 ` Tiju Jacob 0 siblings, 1 reply; 6+ messages in thread From: Gary Thomas @ 2008-07-24 22:25 UTC (permalink / raw) To: Tiju Jacob; +Cc: eCos Discussion Tiju Jacob wrote: > Hi Gary, > > After redboot boots thriugh nor, i think we can change the boot to > nand and restart/boot through nand. rit? > Could u please forward me the archives where these were discussed? I > tried searching but cud'nt find any. As I said, the port you have knows nothing about NAND FLASH - you'll have to add that support (not just "flick a switch") The discussions were about NAND+JFFS2 in general - AFAIK, there's never been any discussion on this list about the mx27 DragonBall boards, on any topic. > On Thu, Jul 24, 2008 at 10:41 PM, Gary Thomas <gary@mlbassoc.com> wrote: >> Tiju Jacob wrote: >>> It is a mx27 ADS based board. The redboot/eCos sources were given by >>> Freescale. >> Please keep replies on the eCos list so that all may benefit. >> >> AFAIK, that port only supports the NOR FLASH on the board. If you want >> to add NAND, you'll need to write the drivers, etc, yourself. There >> has been much discussion on this topic of late; check the archives. >> >>> On Thu, Jul 24, 2008 at 8:56 PM, Gary Thomas <gary@mlbassoc.com> wrote: >>>> Tiju Jacob wrote: >>>>> Hi all, >>>>> >>>>> I have a freescale based development board. I am trying to boot from >>>>> nand using redboot. My queries are: >>>>> >>>>> 1. How would I enable the nand flash in redboot? >>>>> 2. How to integrate jffs2 filesystem with redboot? >>>>> 3. If integrated will I be able to write, read, erase files in the nand >>>>> flash? >>>>> 4. How could I enable the support for these functionalities? >>>>> >>>> What kind of Freescale development board is it? >>>> Where did you get the RedBoot/eCos sources (if not from the public CVS >>>> tree)? -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ECOS] jffs2 filesystem with redboot 2008-07-24 22:25 ` Gary Thomas @ 2008-07-27 15:42 ` Tiju Jacob 0 siblings, 0 replies; 6+ messages in thread From: Tiju Jacob @ 2008-07-27 15:42 UTC (permalink / raw) To: Gary Thomas; +Cc: eCos Discussion Hi Gary, >> After redboot boots thriugh nor, i think we can change the boot to >> nand and restart/boot through nand. rit? >> Could u please forward me the archives where these were discussed? I >> tried searching but cud'nt find any. > > As I said, the port you have knows nothing about NAND FLASH - you'll > have to add that support (not just "flick a switch") > > The discussions were about NAND+JFFS2 in general - AFAIK, there's never > been any discussion on this list about the mx27 DragonBall boards, on > any topic. > >> On Thu, Jul 24, 2008 at 10:41 PM, Gary Thomas <gary@mlbassoc.com> wrote: >>> >>> Tiju Jacob wrote: >>>> >>>> It is a mx27 ADS based board. The redboot/eCos sources were given by >>>> Freescale. >>> >>> Please keep replies on the eCos list so that all may benefit. >>> >>> AFAIK, that port only supports the NOR FLASH on the board. If you want >>> to add NAND, you'll need to write the drivers, etc, yourself. There >>> has been much discussion on this topic of late; check the archives. >>> I am interested in going ahead with writing the drivers for the NAND flash for redboot. From where do I start and how do I go about it? Please give me more information on this. My aim is to boot through the NAND flash in the iMX27 ADS board and port the jffs2 filesystem in the redboot. Thanks in advance. TJ -- Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-07-27 15:42 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-07-24 15:22 [ECOS] jffs2 filesystem with redboot Tiju Jacob
2008-07-24 15:26 ` Gary Thomas
[not found] ` <2b49c3100807241004j530b4243n88233f11606993a3@mail.gmail.com>
2008-07-24 17:11 ` Gary Thomas
2008-07-24 17:39 ` Tiju Jacob
2008-07-24 22:25 ` Gary Thomas
2008-07-27 15:42 ` Tiju Jacob
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).