From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Larmour To: Ling Su Cc: ecos-discuss@sources.redhat.com Subject: Re: [ECOS] eCos tools binary installation under Cygwin Date: Tue, 29 Aug 2000 12:43:00 -0000 Message-id: <39AC1265.947D9697@redhat.co.uk> References: <20000829133621.A4206@visi.com> <39AC078C.4EFF255D@redhat.co.uk> <000901c011ef$b8839160$1201a8c0@crusoe> X-SW-Source: 2000-08/msg00323.html Ling Su wrote: > > Hi, Jifl, > > Do you ever meet following errors when you run pci1.exe test, following is > what I met even I use the most updated cvs release, it is the same as > before. The PCI bus scan failed for a SIGBUS bus error...Could you please > take a look? Thanks! I built pci1 from the latest sources (should be no different in any relevant way to yours) and ran pci1. I got: (gdb) c Continuing. Found device on bus 0, devfn 0x00: Note that board is active. Probed sizes and CPU addresses invalid! Device configuration failed - device already enabled Vendor 0x1033 [NEC][NEC Corporation] Device 0x001A [UNKNOWN] Command 0x0146, Status 0x0280 Class/Rev 0x06800001 [Bridge Device][Other][] Header 0x11FF0E SubVendor 0x1111, Sub ID 0xFF19 BAR[0] 0x1C000000 / probed size 0x00000000 / CPU addr 0x1111FF15 BAR[1] 0x80000000 / probed size 0x00000000 / CPU addr 0x00000000 BAR[2] 0x00000000 / probed size 0x00000000 / CPU addr 0x1111FF16 BAR[3] 0x00000000 / probed size 0x00000000 / CPU addr 0x00000000 BAR[4] 0x00000000 / probed size 0x00000000 / CPU addr 0x1111FF17 BAR[5] 0x00000000 / probed size 0x00000000 / CPU addr 0x00000000 Wired to HAL vector 11 Found device on bus 0, devfn 0x18: Device configuration succeeded Vendor 0x1011 [DEC][Digital Equipment Corporation] Device 0x0009 [DC21140][Fast Ethernet Ctrlr] Command 0x0000, Status 0x0280 Class/Rev 0x02000022 [Network Controller][Ethernet][] Header 0x11FF0E SubVendor 0x1111, Sub ID 0xFF19 BAR[0] 0x00000001 / probed size 0xFFFFFF81 / CPU addr 0xAC000000 BAR[1] 0x00000000 / probed size 0xFFFFFF80 / CPU addr 0xC0000000 BAR[2] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[3] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[4] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF BAR[5] 0x00000000 / probed size 0x00000000 / CPU addr 0xFFFFFFFF Wired to HAL vector 14 Strings in [] are from the PCI Code List at http://www.yourvote.com/pci It seems that some of the device information has not been registered in the PCI Code List. Please consider improving the database by registering the [UNKNOWN] information for your devices. Thanks. PASS: EXIT: I will send you the executable by private mail to see if it works on your board. Jifl -- Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS Tel: +44 (1223) 728762 "Plan to be spontaneous tomorrow." || These opinions are all my own fault