* [ECOS] cannot run test on PC
@ 2000-09-10 20:38 adon@walkersun
2000-09-11 11:04 ` Jonathan Larmour
0 siblings, 1 reply; 2+ messages in thread
From: adon@walkersun @ 2000-09-10 20:38 UTC (permalink / raw)
To: ecos-discuss
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1168 bytes --]
Hi all,
Â
   I have build all the files which eCos
wanted, and I use the eCos to build the stubs for PC target follows the starting
guild.
   So, for the gdb_module.bin, I could
make it into floppy and boot a PC, and I could let it communicated with host
PC(I used the win2000 for the host). and then I open the "run test" in eCos
configure tools, but I cannot get any further response form my target PC(pentiun
II, 266M, 128M RAM). the target always hangup or reboot after download the test
program, and I do not know the program either been download finished. So, could
anybody guide me how to solve this???
Â
My project is to port a RTOS into mips 3000, maybe toshiba or
IDT, and I try eCos for several weeks on mips, and it cannot work on my
target(tx3927), so I change evaluate from the target to PC. But now I still
cannot get response from PC. So could your help me to let the system
work???
Â
And I also found another problem, when I configure the serial
port speed to 115200 as default, and I let the target PC boot, but I found the
target PC serial port speed also 38400, where am I wrong???
Â
Adon Chen
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [ECOS] cannot run test on PC
2000-09-10 20:38 [ECOS] cannot run test on PC adon@walkersun
@ 2000-09-11 11:04 ` Jonathan Larmour
0 siblings, 0 replies; 2+ messages in thread
From: Jonathan Larmour @ 2000-09-11 11:04 UTC (permalink / raw)
To: adon@walkersun; +Cc: ecos-discuss
> "adon@walkersun" wrote:
>
> I have build all the files which eCos wanted, and I use the eCos to
> build the stubs for PC target follows the starting guild.
> So, for the gdb_module.bin, I could make it into floppy and boot a
> PC, and I could let it communicated with host PC(I used the win2000 for
> the host). and then I open the "run test" in eCos configure tools, but I
> cannot get any further response form my target PC(pentiun II, 266M, 128M
> RAM). the target always hangup or reboot after download the test program,
> and I do not know the program either been download finished. So, could
> anybody guide me how to solve this???
Did you change your template back to "default" from "stubs" and rebuild all
the tests, preferably in a new build tree?
> And I also found another problem, when I configure the serial port speed
> to 115200 as default, and I let the target PC boot, but I found the
> target PC serial port speed also 38400, where am I wrong???
Nothing - this is again one of the failings of the i386-pc port I'm afraid.
Jifl
--
Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS Tel: +44 (1223) 728762
"Plan to be spontaneous tomorrow." || These opinions are all my own fault
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2000-09-11 11:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-09-10 20:38 [ECOS] cannot run test on PC adon@walkersun
2000-09-11 11:04 ` Jonathan Larmour
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).