[ECOS] PCI into PC target

[ECOS] PCI into PC target

[adon@walkersun]

Hi all,

    I used GUI configure tool in cygwin at win2000. The configue tool do not
let insert the PCI to the I386 template. Are there any method to let PCI
plug into??? I have read the email list from jnly 2000, but I cannot
understand what I have to do. Should I change the ecos.db directly??

Adon Chen

Re: [ECOS] PCI into PC target

[Jonathan Larmour]

"adon@walkersun" wrote:
> 
> Hi all,
> 
>     I used GUI configure tool in cygwin at win2000. The configue tool do not
> let insert the PCI to the I386 template. Are there any method to let PCI
> plug into??? I have read the email list from jnly 2000, but I cannot
> understand what I have to do. Should I change the ecos.db directly??

There is no PCI support for i386 at present. Contributions are welcome :-).

Jifl
-- 
Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS  Tel: +44 (1223) 728762
"Plan to be spontaneous tomorrow."  ||  These opinions are all my own fault

Re: [ECOS] PCI into PC target

[Boris V. Guzhov]

Hi,

Is there this  patch in the current cvs?

--
Boris Guzhov,
St.Petersburg, Russia


> Hi,
>
>     Would you mind to give me the copy????
>
> Adon Chen
> ----- Original Message -----
> From: "Fabrice Gautier" <Fabrice_Gautier@sdesigns.com>
> To: "adon@walkersun" <adon@walkersun.com>
> Cc: <ecos-discuss@sourceware.cygnus.com>
> Sent: Tuesday, September 19, 2000 2:11 AM
> Subject: RE: [ECOS] PCI into PC target
>
>
> > > -----Original Message-----
> > > From: Jonathan Larmour [ mailto:jlarmour@redhat.com ]
> > > Sent: Monday, September 18, 2000 7:05 AM
> > > To: adon@walkersun
> > > Cc: ecos-discuss@sourceware.cygnus.com
> > > Subject: Re: [ECOS] PCI into PC target
> > >
> > >
> > > "adon@walkersun" wrote:
> > > >
> > > > Hi all,
> > > >
> > > >     I used GUI configure tool in cygwin at win2000. The
> > > configue tool do not
> > > > let insert the PCI to the I386 template. Are there any
> > > method to let PCI
> > > > plug into??? I have read the email list from jnly 2000, but I cannot
> > > > understand what I have to do. Should I change the ecos.db directly??
> > >
> > > There is no PCI support for i386 at present. Contributions
> > > are welcome :-).
> >
> > I already contributed a PCI support for PC (Indeed, I use PCI device wit
> > eCos), however, It was not very clean and maybe I contributed it
directly
> to
> > the ecos mainteners and not in the list.
> > I have now a patch against the current cvs that i Can send.
> >
> > Regards,
> >
> > --
> > Fabrice Gautier
> > fabrice_gautier@sdesigns.com
> >
> >
> >
> >
>

Re: [ECOS] PCI into PC target

[adon@walkersun]

Hi,

    Would you mind to give me the copy????

Adon Chen
----- Original Message -----
From: "Fabrice Gautier" <Fabrice_Gautier@sdesigns.com>
To: "adon@walkersun" <adon@walkersun.com>
Cc: <ecos-discuss@sourceware.cygnus.com>
Sent: Tuesday, September 19, 2000 2:11 AM
Subject: RE: [ECOS] PCI into PC target


> > -----Original Message-----
> > From: Jonathan Larmour [ mailto:jlarmour@redhat.com ]
> > Sent: Monday, September 18, 2000 7:05 AM
> > To: adon@walkersun
> > Cc: ecos-discuss@sourceware.cygnus.com
> > Subject: Re: [ECOS] PCI into PC target
> >
> >
> > "adon@walkersun" wrote:
> > >
> > > Hi all,
> > >
> > >     I used GUI configure tool in cygwin at win2000. The
> > configue tool do not
> > > let insert the PCI to the I386 template. Are there any
> > method to let PCI
> > > plug into??? I have read the email list from jnly 2000, but I cannot
> > > understand what I have to do. Should I change the ecos.db directly??
> >
> > There is no PCI support for i386 at present. Contributions
> > are welcome :-).
>
> I already contributed a PCI support for PC (Indeed, I use PCI device wit
> eCos), however, It was not very clean and maybe I contributed it directly
to
> the ecos mainteners and not in the list.
> I have now a patch against the current cvs that i Can send.
>
> Regards,
>
> --
> Fabrice Gautier
> fabrice_gautier@sdesigns.com
>
>
>
>

RE: [ECOS] PCI into PC target

[Fabrice Gautier]

> -----Original Message-----
> From: Jonathan Larmour [ mailto:jlarmour@redhat.com ]
> Sent: Monday, September 18, 2000 7:05 AM
> To: adon@walkersun
> Cc: ecos-discuss@sourceware.cygnus.com
> Subject: Re: [ECOS] PCI into PC target
> 
> 
> "adon@walkersun" wrote:
> > 
> > Hi all,
> > 
> >     I used GUI configure tool in cygwin at win2000. The 
> configue tool do not
> > let insert the PCI to the I386 template. Are there any 
> method to let PCI
> > plug into??? I have read the email list from jnly 2000, but I cannot
> > understand what I have to do. Should I change the ecos.db directly??
> 
> There is no PCI support for i386 at present. Contributions 
> are welcome :-).

I already contributed a PCI support for PC (Indeed, I use PCI device wit
eCos), however, It was not very clean and maybe I contributed it directly to
the ecos mainteners and not in the list. 
I have now a patch against the current cvs that i Can send. 

Regards,

-- 
Fabrice Gautier
fabrice_gautier@sdesigns.com