* [ECOS] i386 architecture
@ 2000-10-05 23:20 D.S.Phani Kumar
2000-10-06 7:38 ` Alex Mathews
0 siblings, 1 reply; 2+ messages in thread
From: D.S.Phani Kumar @ 2000-10-05 23:20 UTC (permalink / raw)
To: ecos-discuss
Hello all,
I am experimenting eCos with the PC (386 compatible). I have configured the
eCos and finally got some .img and .bin files. Then I copied this into a
floppy using the Unix DD command. I booted another system using this floppy.
The system shows some funny characters. I have connected this system to
another using serial cable. Now when I tried to run the tests on the another
PC the PC which is booted with eCos shows some funny characters.
Does anyone can tell me what I should do. Are there any links/material/URL's
read about configuring the eCos for the 386 PC's
with best regards,
D.S.Phani Kumar
*********************************************************
Wipro Limited, Global R & D,
Chamundi Complex,
26, Hosur Road, Bommanahalli,
Bangalore - 560 068. India
Ph : +91-80-5722293/96 Extn:5367
Fax : +91-80-5722696 / 5722073
mailto : phani.kumar@wipro.com
*********************************************************
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [ECOS] i386 architecture
2000-10-05 23:20 [ECOS] i386 architecture D.S.Phani Kumar
@ 2000-10-06 7:38 ` Alex Mathews
0 siblings, 0 replies; 2+ messages in thread
From: Alex Mathews @ 2000-10-06 7:38 UTC (permalink / raw)
To: D.S.Phani Kumar; +Cc: ecos-discuss
What you are seeing is correct. You are seeing data output to the
screen of the target system. Any printfs will be displayed in your GDB
session and not on the target screen. All output from the target goes
back over the serial line. So, play with the example programs, or the
test programs to see if things are working correctly.
-Alex
"D.S.Phani Kumar" wrote:
>
> Hello all,
> I am experimenting eCos with the PC (386 compatible). I have configured the
> eCos and finally got some .img and .bin files. Then I copied this into a
> floppy using the Unix DD command. I booted another system using this floppy.
> The system shows some funny characters. I have connected this system to
> another using serial cable. Now when I tried to run the tests on the another
> PC the PC which is booted with eCos shows some funny characters.
>
> Does anyone can tell me what I should do. Are there any links/material/URL's
> read about configuring the eCos for the 386 PC's
>
> with best regards,
> D.S.Phani Kumar
> *********************************************************
> Wipro Limited, Global R & D,
> Chamundi Complex,
> 26, Hosur Road, Bommanahalli,
> Bangalore - 560 068. India
>
> Ph : +91-80-5722293/96 Extn:5367
> Fax : +91-80-5722696 / 5722073
> mailto : phani.kumar@wipro.com
> *********************************************************
--
Alex Mathews
CrosStor Software, Inc.
908-226-0100 ext 148
alexma@crosstor.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2000-10-06 7:38 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-10-05 23:20 [ECOS] i386 architecture D.S.Phani Kumar
2000-10-06 7:38 ` Alex Mathews
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).