From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Bürgel To: ecos-discuss@sourceware.cygnus.com Subject: Re: [ECOS]Information about - Atmel ARM7TDMI AT91 Board Date: Thu, 09 Nov 2000 08:11:00 -0000 Message-id: <3A0AC68D.1869AEE3@genologic.de> References: X-SW-Source: 2000-11/msg00132.html Leandro Vieira wrote: > > Hello. > > I had completed building tools for i386 PC target under windows NT with > binutils-2.10,gcc > 2.95.2 and gdb 5.0. and had also applyed the patch ecos-gcc-2952.pat to > gcc. > Everything is OK, that is, i´m able to create application and downloded it > to that target and run it. > > Now i want use new target that is Atmel ARM7TDMI AT91 Board. > My question is: Can i use this target and do the same thing like i have > done with i386 PC target? > > In eCos configuration tool, there is ARM development board (PID) and i > don't know if it has any > relation with the target that i want to use. > > In eCos documentation i saw this: > eCos, CygMon and the GDB stubs all support the PID fitted > with both ARM7T and ARM9 daughterboards, > and it seems to be related with the target that i have. > > Can somebody tell me if it is possible build tools for this target, Atmel > ARM7TDMI AT91 Board. > and how can i do it or wich document should i seek information about. Unfortunately there is some porting effort required to run eCos on a AT91 platform. You _can_not_ simply take the ARM-PID stuff to run on your ARM-AT91 platform. Fortunately - for you - I'm working on the AT91-port, but can't say how long it takes until the code is working and stable. -------------------------------------------------- Andreas Bürgel Software Engineer ab@genologic.de GenoLogic GmbH, Dortmund, Germany