From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hsiang-ting Cheng To: danish iftikhar Cc: ecos-discuss@sources.redhat.com Subject: Re: [ECOS] EP7211 & Jeeni Date: Thu, 23 Nov 2000 17:31:00 -0000 Message-id: <3A1DC56D.441CE48F@broadmedia.com.tw> References: X-SW-Source: 2000-11/msg00320.html Using JEENI means you don't need GDB stubs (disable "Include GDB stubs in HAL). Your arm-elf-gdb is talking to the ICE via direct serial connection or ethernet connection (select ANGEL/serial or ANGEL/Ethernet in Taget Setting if you are using insight-5.0 for arm-elf) Some hints can be found in the FAQs of JEENI ( http://www.epitools.com/support/arm/faq_jeeni.shtml ) However, it is talking about gdb-4.18. For diagnostic output, you should "disable GDB protocol for diagnostic output" and using HyperTerminal or minicom to connect to the UART of your board. Terry Cheng danish iftikhar wrote: > Hi > > i have build ecos on the linux host for EP7211 target board . > i want to connect to the target board through the Embedded Ice (Jeeni). > Does it also requires that gdb stub should be sitting inside the board . In > ecos.ecc file there is option for serial port for the diagnostic output . > But if we use Jeeni what happens to tha diagnostic output . where will this > output be printed and how . > do i need to configure some options in ecos.ecc to be able to make it behave > decently with Jeeni . > > thanks > danish. > _____________________________________________________________________________________ > Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com