RE: [ECOS] build error for i386

RE: [ECOS] build error for i386

[Natarajan, Mekala (CTS)]

hi all,
	i upgraded the cygwin installation to latest version(1.1.6)and tried
building the kernel agin from config tool..
it reported the following error:
In file included from
//D/sample/samp_install/include/cyg/memalloc/dlmalloc.hxx:76,
                 from
//d/eCos/packages/services/memalloc/common/current/src/dlmalloc.cxx:208:
//D/sample/samp_install/include/cyg/memalloc/dlmallocimpl.hxx:67:
pkgconf/heaps.hxx: No such file or directory
//D/sample/samp_install/include/cyg/memalloc/dlmallocimpl.hxx:69: warning:
`CYGMEM_HEAP_COUNT' is not defined
make[1]: *** [src/dlmalloc.o.d] Error 1
make[1]: Leaving directory
`/d/sample/samp_build/services/memalloc/common/current'
make: *** [build] Error 2

Can someone suggest a solution..

mekala


-----Original Message-----
From: Jonathan Larmour [ mailto:jlarmour@cygnus.co.uk ]
Sent: Friday, December 08, 2000 12:54 AM
To: Natarajan, Mekala (CTS)
Cc: ecos-discuss@sourceware.cygnus.com
Subject: Re: [ECOS] error building


"Natarajan, Mekala (CTS)" wrote:
> 
> hi,
>  i installed ecos from anoncvs server.
> Now i am trying to kernel for i386 target..
> I gave build library from configuration tool..
> it gave the following error::
> 
> make -r -C services/memalloc/common/current heaps.cxx
> make[1]: Entering directory
> `/d/test/tes_build/services/memalloc/common/current'
> XPWD=`pwd` ; cd //d/eCos/packages/services/memalloc/common/current/src ;
sh
> heapgen.tcl "//D/test/tes_install" "$XPWD"
> cygpath: illegal option -- s

Upgrade your cygwin installation (or wait for the next anoncvs update later
today which will also work around this).

Jifl
-- 
Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS  Tel: +44 (1223) 728762
"Plan to be spontaneous tomorrow."  ||  These opinions are all my own fault

This e-mail and any files transmitted with it are for the sole use of the intended recipient(s) and may contain confidential and privileged information.
If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. 
Any unauthorised review, use, disclosure, dissemination, forwarding, printing or copying of this email or any action taken in reliance on this e-mail is strictly 
prohibited and may be unlawful.

		Visit us at http://www.cognizant.com

Re: [ECOS] build error for i386

[Jonathan Larmour]

"Natarajan, Mekala (CTS)" wrote:
> 
> hi all,
>         i upgraded the cygwin installation to latest version(1.1.6)and tried
> building the kernel agin from config tool..
> it reported the following error:
> In file included from
> //D/sample/samp_install/include/cyg/memalloc/dlmalloc.hxx:76,
>                  from
> //d/eCos/packages/services/memalloc/common/current/src/dlmalloc.cxx:208:
> //D/sample/samp_install/include/cyg/memalloc/dlmallocimpl.hxx:67:
> pkgconf/heaps.hxx: No such file or directory
> //D/sample/samp_install/include/cyg/memalloc/dlmallocimpl.hxx:69: warning:
> `CYGMEM_HEAP_COUNT' is not defined
> make[1]: *** [src/dlmalloc.o.d] Error 1
> make[1]: Leaving directory
> `/d/sample/samp_build/services/memalloc/common/current'
> make: *** [build] Error 2
> 
> Can someone suggest a solution..

Did you use a new built tree? It's just that pkgconf/heaps.hxx really
should exist after heapgen.tcl has been executed.

Jifl
-- 
Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS  Tel: +44 (1223) 728762
"Plan to be spontaneous tomorrow."  ||  These opinions are all my own fault

Re: [ECOS] build error for I386

[Jonathan Larmour]

"adon@walkersun" wrote:
> 
> Hi,
> 
>     I have updated the tools to eCos 1.3.1.1, if this is the newset that i
> am done. But I also have this problem. as you said I should use the conflict
> and resolved, but the system told me no solution.

That's odd. I suggest then manually editing the value of the relevant
option to make it the same as the requirement.

Jifl
-- 
Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS  Tel: +44 (1223) 728762
"Plan to be spontaneous tomorrow."  ||  These opinions are all my own fault

Re: [ECOS] build error for I386

[adon@walkersun]

Hi,

    I have updated the tools to eCos 1.3.1.1, if this is the newset that i
am done. But I also have this problem. as you said I should use the conflict
and resolved, but the system told me no solution.

Adon Chen

----- Original Message -----
From: "Jonathan Larmour" <jlarmour@redhat.com>
To: "adon@walkersun" <adon@walkersun.com>
Cc: <ecos-discuss@sourceware.cygnus.com>
Sent: Saturday, September 16, 2000 1:32 AM
Subject: Re: [ECOS] build error for I386


> "adon@walkersun" wrote:
> >
> > Hi all,
> >
> >     I have updated all the files of eCos. and I try to build the system
of eCos.
> > First, I build the stub system of I386, and the libary could be built.
but the conflicts windows always show the following messages
> [snip]
>
> Did you update your host tools as described on
> http://sources.redhat.com/ecos/anoncvs.html ? If not, you would get these
> types of problems.
>
> Alternatively if you did, you probably just need to do "Resolve conflicts"
> and accept the recommendations.
>
> Jifl
> --
> Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS  Tel: +44 (1223)
728762
> "Plan to be spontaneous tomorrow."  ||  These opinions are all my own
fault
>
>
>

Re: [ECOS] build error for I386

[Jonathan Larmour]

"adon@walkersun" wrote:
> 
> Hi all,
> 
>     I have updated all the files of eCos. and I try to build the system of eCos.
> First, I build the stub system of I386, and the libary could be built. but the conflicts windows always show the following messages
[snip]

Did you update your host tools as described on
http://sources.redhat.com/ecos/anoncvs.html ? If not, you would get these
types of problems.

Alternatively if you did, you probably just need to do "Resolve conflicts"
and accept the recommendations.

Jifl
-- 
Red Hat, 35 Cambridge Place, Cambridge, UK. CB2 1NS  Tel: +44 (1223) 728762
"Plan to be spontaneous tomorrow."  ||  These opinions are all my own fault

[ECOS] build error for I386

[adon@walkersun]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 5422 bytes --]

Hi all,
 
    I have updated all the files of eCos. and I 
try to build the system of eCos. 
First, I build the stub system of I386, and the libary could 
be built. but the conflicts windows always show the following 
messages
 
----------------------------------------
 
SYGPKG_ERROR Usatisfied Requires 
CYGBLD_ISO_CODE_HEADER="<cyg/error/codes.h>"

----------------------------------------
 
But the directory I could found this file, Why the conflict is 
pop????
 
And then I tried to build the test of stub. But the system 
always prompt me as following
 
----------------------------------------
. . . . make -r -C io/serial/current 
tests make[1]: Entering directory 
`/ecos/x86/try/try_build/io/serial/current' make[1]: *** No rule to make 
target `tests/flow1.d', needed by `tests.stamp'.  Stop. make[1]: Leaving 
directory `/ecos/x86/try/try_build/io/serial/current' make: *** [tests] Error 
2
 
*** Process 692 terminated (rc=2) *** Killing process 692 
(TerminateProcess) ----------------------------------------
Either I enable or disble the follow control item, I always 
get the error message. How couls I slove the problem?????
 
So I try to build I386 system with default configuration, and 
at this time, the conflict item has disappeared. At this time I try to build the 
library, but I get error message, too. The error messages are as 
following
----------------------------------------
i386-elf-gcc -c  
-I//C/embedded/x86/default/default_install/include 
-I//C/eCos.ok/packages/language/c/libm/current 
-I//C/eCos.ok/packages/language/c/libm/current/src 
-I//C/eCos.ok/packages/language/c/libm/current/tests -I. 
-I//C/eCos.ok/packages/language/c/libm/current/src/double/portable-api/ 
-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef 
-Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti 
-fno-exceptions -fvtable-gc -finit-priority -ffloat-store 
-Wp,-MD,src/double/portable-api/s_rint.tmp -o 
src/double/portable-api/language_c_libm_s_rint.o 
//C/eCos.ok/packages/language/c/libm/current/src/double/portable-api/s_rint.c
 
i386-elf-gcc -c  
-I//C/embedded/x86/default/default_install/include 
-I//C/eCos.ok/packages/language/c/libm/current 
-I//C/eCos.ok/packages/language/c/libm/current/src 
-I//C/eCos.ok/packages/language/c/libm/current/tests -I. 
-I//C/eCos.ok/packages/language/c/libm/current/src/double/portable-api/ 
-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef 
-Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections 
-fno-rtti -fno-exceptions -fvtable-gc -finit-priority -ffloat-store 
-Wp,-MD,src/double/portable-api/s_scalbn.tmp -o 
src/double/portable-api/language_c_libm_s_scalbn.o 
//C/eCos.ok/packages/language/c/libm/current/src/double/portable-api/s_scalbn.c
 
i386-elf-gcc -c  
-I//C/embedded/x86/default/default_install/include 
-I//C/eCos.ok/packages/language/c/libm/current 
-I//C/eCos.ok/packages/language/c/libm/current/src 
-I//C/eCos.ok/packages/language/c/libm/current/tests -I. 
-I//C/eCos.ok/packages/language/c/libm/current/src/double/portable-api/ 
-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef 
-Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections 
-fno-rtti -fno-exceptions -fvtable-gc -finit-priority -ffloat-store 
-Wp,-MD,src/double/portable-api/s_sin.tmp -o 
src/double/portable-api/language_c_libm_s_sin.o 
//C/eCos.ok/packages/language/c/libm/current/src/double/portable-api/s_sin.c
 
i386-elf-gcc -c  
-I//C/embedded/x86/default/default_install/include 
-I//C/eCos.ok/packages/language/c/libm/current 
-I//C/eCos.ok/packages/language/c/libm/current/src 
-I//C/eCos.ok/packages/language/c/libm/current/tests -I. 
-I//C/eCos.ok/packages/language/c/libm/current/src/double/portable-api/ 
-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef 
-Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections 
-fno-rtti -fno-exceptions -fvtable-gc -finit-priority -ffloat-store 
-Wp,-MD,src/double/portable-api/s_tan.tmp -o 
src/double/portable-api/language_c_libm_s_tan.o 
//C/eCos.ok/packages/language/c/libm/current/src/double/portable-api/s_tan.c
 
i386-elf-gcc -c  
-I//C/embedded/x86/default/default_install/include 
-I//C/eCos.ok/packages/language/c/libm/current 
-I//C/eCos.ok/packages/language/c/libm/current/src 
-I//C/eCos.ok/packages/language/c/libm/current/tests -I. 
-I//C/eCos.ok/packages/language/c/libm/current/src/double/portable-api/ 
-Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef 
-Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections 
-fno-rtti -fno-exceptions -fvtable-gc -finit-priority -ffloat-store 
-Wp,-MD,src/double/portable-api/s_modf.tmp -o 
src/double/portable-api/language_c_libm_s_modf.o 
//C/eCos.ok/packages/language/c/libm/current/src/double/portable-api/s_modf.c
 
make[1]: *** No rule to make target 
`src/double/portable-api/s_tanh.c ', needed by `libtarget.a.stamp'.  
Stop. make[1]: Leaving directory 
`/ecos/x86/default/default_build/language/c/libm/current' make: *** [build] 
Error 2
 
*** Process 692 terminated (rc=2) *** Killing process 692 
(TerminateProcess)
----------------------------------------
 
I thought that would be the math lib problem, so I 
removed the math package, And it's work. But I also get the same error message 
as I build stub when I build the test. Couls anybody tell me how to solve 
????
 
Adon Chen