From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Larmour To: "Koeller, T." Cc: 'eCos mailing list' Subject: Re: [ECOS] cannot get insight to work Date: Wed, 24 Jan 2001 11:14:00 -0000 Message-id: <3A6F299A.8A2FC3DE@redhat.com> References: <850597605E79D21182830008C7A4B9CF07D88604@COMM1> X-SW-Source: 2001-01/msg00410.html "Koeller, T." wrote: > > I wonder if someone can help me with the problem described below: > > I am building the sample application 'hello.c' on a Cygwin (Windows NT) host > for a PC target. Everything appears to work, 'hello.exe' is generated > without errors. I then boot the target system from a floppy containing a gdb > stubs program I built before. Next, I start Insight (i386-elf-gdb) and set > up the target serial port parameters. Up to this point, everything appears > to work. Then I load my debug executable 'hello.exe'. This also does not > give any errors, but no source code is displayed, even though the source > file is in the same directory as the executable. If I then hit either 'Run' > or 'Download', I get 'Request to download non-existent executable > /ecos-example/hello.exe'. When I select 'hello.c' from the 'current file > name' combo box, I get 'Error: couldn't stat "/ecos-example/hello.c": no > such file or directory'. Insight is a cygwin program. Can you do an: ls -l /ecos-example/hello.exe in a cygwin bash prompt? You should make sure you can :-). If you can, then try updating to a snapshot version of Insight from http://sources.redhat.com/insight/ Jifl -- Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062 Un cheval, pas du glue. Pas du cheval, beaucoup du glue. || Opinions==mine