From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonathan Larmour To: james chen Cc: ecos-discuss@sources.redhat.com Subject: Re: [ECOS] How to run eCos in SMDK41100 board Date: Tue, 30 Jan 2001 19:04:00 -0000 Message-id: <3A7780B3.598D1676@redhat.com> References: <001a01c08b2f$56472200$c408aa0a@inc.inventec> X-SW-Source: 2001-01/msg00483.html james chen wrote: > > Now I have a SMDK41100 board (Samsung > MCU Development Kit) based on S3C44B0X (CPU is ARM7TDMI), I don't know how > to let eCos run on it. the SMDK41100 board doesn't have eth net, can I run > RedBoot through serial port and how to do it? Yes RedBoot can be used over serial. To port a new board, generally the advice is to copy an existing port that is closest to what you have. In your case, the PID may be a good start. Then adapt it bit by bit for your board. See http://sources.redhat.com/ecos/docs-latest/porting/index.html for some more detail. Jifl -- Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062 Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine