[ECOS] ConfigTool2.0

[ECOS] ConfigTool2.0

[Trenton D. Adams]

I'm curious.  Can I use the old config tool for the new CVS repository?
I think I read somewhere that I can't, but I can't seem to find the
information anymore.

Re: [ECOS] ConfigTool2.0

[Jonathan Larmour]

"Trenton D. Adams" wrote:
> 
> I'm curious.  Can I use the old config tool for the new CVS repository?
> I think I read somewhere that I can't, but I can't seem to find the
> information anymore.

You can use the 1.3.1.2 config tool with the current CVS repository. You
can't use the 1.3.1 tool with CVS, and haven't been able to do so for many
months.

Jifl
-- 
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine
Come to the Red Hat TechWorld open source conference in Brussels!
Keynotes, techie talks and exhibitions    http://www.redhat-techworld.com/

Re: [ECOS] ConfigTool2.0

[Sergio Nunes]

Sorry. Found a typo in original post. Paragraph in original e-mail should read

When I looked at the build tree created with 1.3.1 config tree
"mlt_powerpc_sim_ram.ldi" doesn't include "cyg/infra/cygtype.inc" which isn't
part of 1.3.1 (at least I couldn't find it when I looked in
"packages\infra\v1_3_1\include".


Sergio





"Sergio Nunes" <snunes@Celestica.com>@sources.redhat.com on 08/06/2001 01:58:30
PM

Sent by:  ecos-discuss-owner@sources.redhat.com


To:   ecos-discuss@sourceware.cygnus.com
cc:

Subject:  Re: [ECOS] ConfigTool2.0





I assume you can't use 1.3.1.2 Configtool with eCos 1.3.1. At least when I tried
I got the following:

In file included from
//C/PROGRA~1/RedHat/eCos/packages/hal/powerpc/arch/v1_3_1/src/powerpc.ld:141:
//C/PROGRA~1/RedHat/eCos/work/eCos_405_sim_install/include/pkgconf/mlt_powerpc_sim_ram.ldi:5:



cyg/infra/cyg_type.inc: No such file or directory

When I looked at the build tree created with 1.3.1.2 config tree
"mlt_powerpc_sim_ram.ldi" doesn't include "cyg/infra/cygtype.inc" which isn't
part of 1.3.1 (at least I couldn't find it when I looked in
"packages\infra\v1_3_1\include".

If that's the case, I'll just go back to 1.3.1 config tool or use current CVS
eCos.

Sergio Nunes                                     Celestica Inc. (D387)
Staff Engineer                                   Phone: (416) 448-2942
Development and Design Services                  snunes@celestica.com





Jonathan Larmour <jlarmour@redhat.com>@sources.redhat.com on 08/06/2001 01:19:45
PM

Sent by:  ecos-discuss-owner@sources.redhat.com


To:   "Trenton D. Adams" <tadams@extremeeng.com>
cc:   ecos-discuss@sourceware.cygnus.com

Subject:  Re: [ECOS] ConfigTool2.0


"Trenton D. Adams" wrote:
>
> I'm curious.  Can I use the old config tool for the new CVS repository?
> I think I read somewhere that I can't, but I can't seem to find the
> information anymore.

You can use the 1.3.1.2 config tool with the current CVS repository. You
can't use the 1.3.1 tool with CVS, and haven't been able to do so for many
months.

Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine
Come to the Red Hat TechWorld open source conference in Brussels!
Keynotes, techie talks and exhibitions    http://www.redhat-techworld.com/

Re: [ECOS] ConfigTool2.0

[Jonathan Larmour]

Sergio Nunes wrote:
> 
> I assume you can't use 1.3.1.2 Configtool with eCos 1.3.1. At least when I tried
> I got the following:
[snip]

Yep. There's a note on http://sources.redhat.com/ecos/anoncvs.html saying
that.

Jifl
-- 
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine
Come to the Red Hat TechWorld open source conference in Brussels!
Keynotes, techie talks and exhibitions    http://www.redhat-techworld.com/

Re: [ECOS] ConfigTool2.0

[Sergio Nunes]

I assume you can't use 1.3.1.2 Configtool with eCos 1.3.1. At least when I tried
I got the following:

In file included from
//C/PROGRA~1/RedHat/eCos/packages/hal/powerpc/arch/v1_3_1/src/powerpc.ld:141:
//C/PROGRA~1/RedHat/eCos/work/eCos_405_sim_install/include/pkgconf/mlt_powerpc_sim_ram.ldi:5:


cyg/infra/cyg_type.inc: No such file or directory

When I looked at the build tree created with 1.3.1.2 config tree
"mlt_powerpc_sim_ram.ldi" doesn't include "cyg/infra/cygtype.inc" which isn't
part of 1.3.1 (at least I couldn't find it when I looked in
"packages\infra\v1_3_1\include".

If that's the case, I'll just go back to 1.3.1 config tool or use current CVS
eCos.

Sergio Nunes                                     Celestica Inc. (D387)
Staff Engineer                                   Phone: (416) 448-2942
Development and Design Services                  snunes@celestica.com





Jonathan Larmour <jlarmour@redhat.com>@sources.redhat.com on 08/06/2001 01:19:45
PM

Sent by:  ecos-discuss-owner@sources.redhat.com


To:   "Trenton D. Adams" <tadams@extremeeng.com>
cc:   ecos-discuss@sourceware.cygnus.com

Subject:  Re: [ECOS] ConfigTool2.0


"Trenton D. Adams" wrote:
>
> I'm curious.  Can I use the old config tool for the new CVS repository?
> I think I read somewhere that I can't, but I can't seem to find the
> information anymore.

You can use the 1.3.1.2 config tool with the current CVS repository. You
can't use the 1.3.1 tool with CVS, and haven't been able to do so for many
months.

Jifl
--
Red Hat, Rustat House, Clifton Road, Cambridge, UK. Tel: +44 (1223) 271062
Maybe this world is another planet's Hell -Aldous Huxley || Opinions==mine
Come to the Red Hat TechWorld open source conference in Brussels!
Keynotes, techie talks and exhibitions    http://www.redhat-techworld.com/